Spindle orientation, M19 questions.

08 Jan 2015 21:25 #54775 by andradela

Replied by andradela on topic Spindle orientation, M19 questions.

I will try config by pncconf.

Please Log in or Create an account to join the conversation.

09 Jan 2015 00:18 - 09 Jan 2015 00:33 #54791 by eneias_eringer

Replied by eneias_eringer on topic Spindle orientation, M19 questions.

I have linked the output of encoder to an analog in and make the positioning by Gcode !

Last edit: 09 Jan 2015 00:33 by eneias_eringer.

Please Log in or Create an account to join the conversation.

09 Jan 2015 01:17 #54794 by andradela

Replied by andradela on topic Spindle orientation, M19 questions.

I saw, do you use asynchronous motor with a vfd?

Please Log in or Create an account to join the conversation.

09 Jan 2015 01:20 #54795 by eneias_eringer

Replied by eneias_eringer on topic Spindle orientation, M19 questions.

Yes !!! a Weg CFW08 VFD with a 1cv asynchronous motor original of this lathe !!!

Please Log in or Create an account to join the conversation.

09 Jan 2015 03:06 #54800 by andradela

Replied by andradela on topic Spindle orientation, M19 questions.

I tryed config a spindle using pncconf, follow atached the files.

File Name: my_LinuxCN...1-08.hal
File Size:10 KB

File Name: my_LinuxCN...1-08.ini
File Size:3 KB

Please Log in or Create an account to join the conversation.

01 Feb 2015 00:47 - 02 Feb 2015 20:02 #55511 by eneias_eringer

Replied by eneias_eringer on topic Spindle orientation, M19 questions.

Spindle Orient

Last edit: 02 Feb 2015 20:02 by eneias_eringer.

Please Log in or Create an account to join the conversation.

02 Feb 2015 20:04 #55580 by eneias_eringer

Replied by eneias_eringer on topic Spindle orientation, M19 questions.

Rigid Tapping

Please Log in or Create an account to join the conversation.

Moderators: piasdom

Time to create page: 0.635 seconds