interpreter on EMC

More
21 Oct 2009 01:13 #1006 by vincent
interpreter on EMC was created by vincent
:laugh: Hey, I found myself lost in the EMC world~recently, I was interested in the interpreter on EMC and the interpolation algorithm. But I was uncertain of the principle about these problems. First, we could write G codes files and run them on EMC, but what we could do is just to curve straight lines and circles, like G1 and G2/G3. Then the interpolator directly interpret the G code, and "make" these commands to be signals, then run the machine. But one thing, if I want to make NURBS, some complex curves or ever toroidals in EMC,is it possible?? I wonder if there is any "commands" to do these, or if I could make it myself?

if anyone here is interested about these, please contact with me

Please Log in or Create an account to join the conversation.

More
21 Oct 2009 01:48 #1007 by cmorley
Replied by cmorley on topic Re:interpreter on EMC
I believe the development version of EMC has some NURBS functionality added, But beyond that I don't know.
look here:
wiki.linuxcnc.org/cgi-bin/emcinfo.pl?NURBS

Please Log in or Create an account to join the conversation.

More
21 Oct 2009 01:53 #1008 by vincent
Replied by vincent on topic Re:interpreter on EMC
oh, my god!!! you really found that~!! that is it! thanks a billion!!!

Please Log in or Create an account to join the conversation.

More
22 Oct 2009 07:46 #1014 by vincent
Replied by vincent on topic Re:interpreter on EMC
cmorley, one thing I wish you could show me is that the is the patch available? Or should I patch my EMC2 at once so that it will support nurbs??

Please Log in or Create an account to join the conversation.

More
22 Oct 2009 12:23 #1017 by BigJohnT
Replied by BigJohnT on topic Re:interpreter on EMC
That is on the dev version of EMC2.

wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2

John

Please Log in or Create an account to join the conversation.

More
23 Oct 2009 07:26 #1021 by vincent
Replied by vincent on topic Re:interpreter on EMC
oh, god, but the link does not help。。。。。。

Please Log in or Create an account to join the conversation.

More
23 Oct 2009 08:20 #1022 by vincent
Replied by vincent on topic Re:interpreter on EMC
thanks BigJohnT, But still one thing I am curious about is that whether the EMC2.2.3.3 has intergrated the NURBS algorithm already?? because when I try the "Image to gcode", or just import the 3dm file, EMC may interpret the file/image to lots of "G1 ** "codes....so I think the EMC does not have the NURBS algorithm,right??

Please Log in or Create an account to join the conversation.

More
23 Oct 2009 08:27 #1023 by vincent
Replied by vincent on topic Re:interpreter on EMC
BigJohnT wrote:

That is on the dev version of EMC2.

wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2

John

BUT what is the development version? ...please!~I am still a newbie

Please Log in or Create an account to join the conversation.

More
23 Oct 2009 10:33 #1024 by BigJohnT
Replied by BigJohnT on topic Re:interpreter on EMC
Nurbs is only on the 2.4 development version. New things are not usually added to a released version.

John

Please Log in or Create an account to join the conversation.

More
24 Oct 2009 03:12 #1026 by BMG
Replied by BMG on topic Re:interpreter on EMC
I think VIncent is looking for this link

wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Ins..._the_source_with_git

Please Log in or Create an account to join the conversation.

Time to create page: 0.084 seconds
Powered by Kunena Forum