G96

More
06 Apr 2017 20:43 - 06 Apr 2017 23:22 #90981 by Charlieslasher
G96 was created by Charlieslasher
How to program correctly in css mode.
Dose g96 just control the spindle speed and need a feed/rev code also?

Do i need a g95 f0.05 when using g96

Example code

G97 M3 S1200 x3 z10
G96 M3 S80 D2000
G95 x-0.1 f0.05 (dose this have any effect)
Last edit: 06 Apr 2017 23:22 by Charlieslasher.

Please Log in or Create an account to join the conversation.

More
11 Apr 2017 12:19 #91179 by andypugh
Replied by andypugh on topic G96
My lathe G-code typically uses both G95 and G96 together.

They do different things, but both adjust according to the other.

Please Log in or Create an account to join the conversation.

Time to create page: 0.097 seconds
Powered by Kunena Forum