Python G Code Generator in Tab in Axis
09 Jul 2015 02:16 #60530
by mmt
Python G Code Generator in Tab in Axis was created by mmt
does anyone know if there is an example that I can follow to embed a python G Code generator into a tab in axis?
Sorry if this has already been covered but I couldn't seem to find it.
Thanks
Sorry if this has already been covered but I couldn't seem to find it.
Thanks
Please Log in or Create an account to join the conversation.
11 Jul 2015 03:26 #60550
by jtc
Replied by jtc on topic Python G Code Generator in Tab in Axis
see the GladeVCP tutorials.
www.linuxcnc.org/docs/html/gui/gladevcp.html
and see the example configurations on configs/sim/axis/gladevcp
www.linuxcnc.org/docs/html/gui/gladevcp.html
and see the example configurations on configs/sim/axis/gladevcp
Please Log in or Create an account to join the conversation.
11 Jul 2015 13:55 #60557
by BigJohnT
Replied by BigJohnT on topic Python G Code Generator in Tab in Axis
I started a thread on this a while back. I'm away from my computer so I can't search for you.
JT
JT
Please Log in or Create an account to join the conversation.
Time to create page: 0.059 seconds