Licence expired
16 Jun 2017 08:40 #94560
by stomoia
Licence expired was created by stomoia
Hello did you know what this is mean.I use software from more than 6 years and never see it. Please give me some advice in order to can use it again.What shall i do. I can not even start the program.Its hapened yestarday and i have a lot of work on machine.
Please Log in or Create an account to join the conversation.
- Todd Zuercher
-
- Offline
- Platinum Member
-
Less
More
- Posts: 4963
- Thank you received: 1369
16 Jun 2017 13:19 #94573
by Todd Zuercher
Replied by Todd Zuercher on topic Licence expired
I'm pretty sure that notification does not apply to Linuxcnc. Linuxcnc is open source software (read this as free) and has no licensing that expires.
We will need more information to even have an idea of what you have going on, or to even have a chance of helping you.
We will need more information to even have an idea of what you have going on, or to even have a chance of helping you.
Please Log in or Create an account to join the conversation.
16 Jun 2017 14:19 #94579
by stomoia
Replied by stomoia on topic Licence expired
The Ubuntu is starting, and when i start emc2 is showing me that mistake.I have picture of the messages but cant upload here. Give me some email to send
Please Log in or Create an account to join the conversation.
16 Jun 2017 14:26 #94580
by tecno
Replied by tecno on topic Licence expired
No problems to upload pictures here, just do it as it is as easy as including picture in email!
Please Log in or Create an account to join the conversation.
- Todd Zuercher
-
- Offline
- Platinum Member
-
Less
More
- Posts: 4963
- Thank you received: 1369
16 Jun 2017 14:39 - 16 Jun 2017 14:45 #94581
by Todd Zuercher
Replied by Todd Zuercher on topic Licence expired
If it is just Ubuntu 10.04's expiration warnings, you can disregard them.
If you tried to update Ubuntu 10.04 that will result in removing the real-time kernel and will disable Linuxcnc.
I still have one machine running Linuxcnc on Ubuntu 10.04. With a few changes to your sources list update manager should still run fine.
If you tried to update Ubuntu 10.04 that will result in removing the real-time kernel and will disable Linuxcnc.
I still have one machine running Linuxcnc on Ubuntu 10.04. With a few changes to your sources list update manager should still run fine.
# Copy the contents of this file to etc/apt/sources.list and comment out the old lucid lines
deb http://linuxcnc.org lucid base 2.7-rtai
deb http://old-releases.ubuntu.com/ubuntu/ lucid main restricted universe multiverse
deb http://old-releases.ubuntu.com/ubuntu/ lucid-updates main restricted universe multiverse
deb http://old-releases.ubuntu.com/ubuntu/ lucid-security main restricted universe multiverse
deb http://old-releases.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse
Last edit: 16 Jun 2017 14:45 by Todd Zuercher.
Please Log in or Create an account to join the conversation.
16 Jun 2017 15:10 #94587
by stomoia
Replied by stomoia on topic Licence expired
I find ubuntu software center 2.0.7, i never conect my machine in the internet, but now i see that the date of my computer is 2009. I cant change bcs technition is made pasword. But the messages that i attach is: XMESAGE-YOUR LICENSE HAS BEEN EXPIRED !!!
Please Log in or Create an account to join the conversation.
- Todd Zuercher
-
- Offline
- Platinum Member
-
Less
More
- Posts: 4963
- Thank you received: 1369
16 Jun 2017 15:46 #94590
by Todd Zuercher
Replied by Todd Zuercher on topic Licence expired
That message can't have anything to do with Linuxcnc. (at least not directly)
You are going to have to find the origin of the message, and seek advice from that source.
You are going to have to find the origin of the message, and seek advice from that source.
Please Log in or Create an account to join the conversation.
Time to create page: 0.076 seconds