5i23 7i49 7i52 8i20
PCW wrote: On you HALScope screen shots is the shaft moving back and forth?
If not, something very basic is wrong
is the resolver error bit set?
Yes it's the shots of scope when the shaft is moving back and forth.
No the bit was not set.
Is there a firmware that allows to connect the resolver's signals (through the 7i49) and to the 7i52 to drive the 8i20?
PCW wrote: rmsvss6_8 is for a 7I49 and a 7I44
If not what would the right chain for my needs.
PCW wrote: freeby.mesanet.com/5i23_7i49_7i52.zip
7I49 on I/O 0..23 7I52 on I/O 24..47
Thank you for your work but question (of beginner) : unlike other files, (svss6_6s.bit or rmsvss6_8.bit), I could not transfer the file : top9054hostmot2.bit to the directory 5i23
Just rename it to something like 5i23_7i49_7i52.bit and copy it to the /lib/firmware/hostmot2/5i23 directory ( you need to use sudo to do the copy )