Brother CNC

More
07 Mar 2016 18:54 #71175 by Rocklake
Brother CNC was created by Rocklake
We are trying to locate manuals and wiring diagrams for Brother TC-211 Any help would be appreciated.

Please Log in or Create an account to join the conversation.

More
29 Mar 2016 19:07 #72345 by mblaszkiewicz
Replied by mblaszkiewicz on topic Brother CNC
I did a retro fit on my Tc-211. When I bought mine I got a complete set of manuals. What are you looking for specifically?
The following user(s) said Thank You: Rocklake

Please Log in or Create an account to join the conversation.

More
30 Mar 2016 12:23 #72382 by Rocklake
Replied by Rocklake on topic Brother CNC
Thanks for the reply.

We have bought 2 TC-211 with no manuals, so anything would be a help. But mainly a maintenance manual, as both machines run but need some work.
Regards,
Jack

Please Log in or Create an account to join the conversation.

More
31 Mar 2016 03:15 #72435 by kornphlake79
Replied by kornphlake79 on topic Brother CNC
Have you contacted the reseller to see if manuals are available. I've done a lot of work with Yamazen in the US and they've always been willing to send digital copies of the manuals with little to no hassle. My employer is the original owner of several Brother machines though, if you aren't the original owner and the change in ownership wasn't processed through the reseller, you might not get the same level of support. It doesn't cost anything to make a phone call and find out.

I am very familiar with the Brother TC32A, I'm not sure how similar it is to the TC-211 but I might be able to answer some of your questions.

Please Log in or Create an account to join the conversation.

Time to create page: 0.090 seconds
Powered by Kunena Forum