screen resolution
13 Apr 2016 14:53 #73235
by dinkata
screen resolution was created by dinkata
The minimum screen resolution for gmoccapy, using it without side panels is 979 x 750 Pixel.
Is it possible 800x600 for touch panel 12" .
I opened /usr/share/gmoccapy/gmoccapy.glade with Glade .
File read-only
.Please tell Is it possible resolution 800x600 ?
Is it possible 800x600 for touch panel 12" .
I opened /usr/share/gmoccapy/gmoccapy.glade with Glade .
File read-only
.Please tell Is it possible resolution 800x600 ? Please Log in or Create an account to join the conversation.
14 Apr 2016 13:00 #73296
by dinkata
Replied by dinkata on topic screen resolution
Please Log in or Create an account to join the conversation.
14 Apr 2016 16:44 #73315
by newbynobi
Replied by newbynobi on topic screen resolution
Strange, one post got lost and all the links and code
Very strange, so here again:
Gmoccapy 800x480
Norbert
Very strange, so here again:
Gmoccapy 800x480
Norbert
Please Log in or Create an account to join the conversation.
17 Apr 2016 07:37 #73461
by dinkata
Replied by dinkata on topic screen resolution
gmoccapy_lcd7
Yes, I like it
,for now I see no keyboard in tool table editor
Yes, I like it
,for now I see no keyboard in tool table editor Please Log in or Create an account to join the conversation.
17 Aug 2016 13:07 - 18 Aug 2016 04:16 #78930
by dinkata
Replied by dinkata on topic screen resolution
I use gmocappy_lcd 7 on 12" touch screen monitor for LatheHello Dinkata, did you reconfigure GMOCappy to 800x600?
Mark
Please Log in or Create an account to join the conversation.
17 Aug 2016 19:48 #78957
by tommylight
Regards,
Tom
Replied by tommylight on topic screen resolution
Dang that is a nice setup. I can read "rucen hod" so that is Russian, right?? Meaning "manual movement" ???
I use gmocappy_lcd 7 on 12" touch screen monitor for LatheHello Dinkata, did you reconfigure GMOCappy to 800x600?
Mark
Regards,
Tom
Please Log in or Create an account to join the conversation.
Time to create page: 0.129 seconds