User created messages in Gmoccapy

More
25 Apr 2016 02:03 #73830 by RomeReactor
Hello. I work for someone who's trying to get messages to show as pop ups in Gmoccapy, but everything we've tried hasn't worked. We've read the LinuxCNC docs and this thread as well, to no avail. I have some experience with Linux, but mostly as an end user. Can someone please post a step by step example from start to finish?

Thanks in advance.

Please Log in or Create an account to join the conversation.

More
25 Apr 2016 15:47 #73856 by newbynobi
For a working example, just see in the config sim folder gmoccapy_messages.

Just open the sim config from the config picker, then look with halshow at the pins.

gmoccapy.messages.*******

I.e. if you do a
setp gmoccapy.messages.okdialog 1

The message will be displayed.

Norbert

P.S. If you need more help, please post your config and explain what you are trying to do.
The following user(s) said Thank You: RomeReactor

Please Log in or Create an account to join the conversation.

More
26 Apr 2016 00:33 #73882 by RomeReactor
Well, this is embarrassing: we have a few LinuxCNC folders and it turns out we were editing the HAL file in another folder :(

I apologize for the blunder, and thanks for your help. Much appreciated.

Please Log in or Create an account to join the conversation.

Moderators: newbynobiHansU
Time to create page: 0.072 seconds
Powered by Kunena Forum