jd@plasma1 ~ $ linuxcnc ~/linuxcnc/configs/plasma_test_1/plasma_test_1.ini
LINUXCNC - 2.8.0-pre1-2765-g5fec8d9
Machine configuration directory is '/home/jd/linuxcnc/configs/plasma_test_1'
Machine configuration file is 'plasma_test_1.ini'
Starting LinuxCNC...
Found file(REL): ./plasma_test_1_with_gantry.hal
Note: Using POSIX realtime
hm2: loading Mesa HostMot2 driver version 0.15
hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2
iptables: No chain/target/match by that name.
hm2_eth: 10.10.10.10: Hardware address: 00:60:1b:10:40:7d
hm2_eth: discovered 7I76E-16
hm2/hm2_7i76e.0: Smart Serial Firmware Version 43
Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard
Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin
Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin
Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv
hm2/hm2_7i76e.0: 51 I/O Pins used:
hm2/hm2_7i76e.0:     IO Pin 000 (P1-01): StepGen #0, pin Direction (Output)
hm2/hm2_7i76e.0:     IO Pin 001 (P1-14): StepGen #0, pin Step (Output)
hm2/hm2_7i76e.0:     IO Pin 002 (P1-02): StepGen #1, pin Direction (Output)
hm2/hm2_7i76e.0:     IO Pin 003 (P1-15): StepGen #1, pin Step (Output)
hm2/hm2_7i76e.0:     IO Pin 004 (P1-03): StepGen #2, pin Direction (Output)
hm2/hm2_7i76e.0:     IO Pin 005 (P1-16): StepGen #2, pin Step (Output)
hm2/hm2_7i76e.0:     IO Pin 006 (P1-04): StepGen #3, pin Direction (Output)
hm2/hm2_7i76e.0:     IO Pin 007 (P1-17): StepGen #3, pin Step (Output)
hm2/hm2_7i76e.0:     IO Pin 008 (P1-05): StepGen #4, pin Direction (Output)
hm2/hm2_7i76e.0:     IO Pin 009 (P1-06): StepGen #4, pin Step (Output)
hm2/hm2_7i76e.0:     IO Pin 010 (P1-07): Smart Serial Interface #0, pin TxData0 (Output)
hm2/hm2_7i76e.0:     IO Pin 011 (P1-08): Smart Serial Interface #0, pin RxData0 (Input)
hm2/hm2_7i76e.0:     IO Pin 012 (P1-09): IOPort
hm2/hm2_7i76e.0:     IO Pin 013 (P1-10): IOPort
hm2/hm2_7i76e.0:     IO Pin 014 (P1-11): Encoder #0, pin Index (Input)
hm2/hm2_7i76e.0:     IO Pin 015 (P1-12): Encoder #0, pin B (Input)
hm2/hm2_7i76e.0:     IO Pin 016 (P1-13): Encoder #0, pin A (Input)
hm2/hm2_7i76e.0:     IO Pin 017 (P2-01): IOPort
hm2/hm2_7i76e.0:     IO Pin 018 (P2-14): IOPort
hm2/hm2_7i76e.0:     IO Pin 019 (P2-02): IOPort
hm2/hm2_7i76e.0:     IO Pin 020 (P2-15): IOPort
hm2/hm2_7i76e.0:     IO Pin 021 (P2-03): IOPort
hm2/hm2_7i76e.0:     IO Pin 022 (P2-16): IOPort
hm2/hm2_7i76e.0:     IO Pin 023 (P2-04): IOPort
hm2/hm2_7i76e.0:     IO Pin 024 (P2-17): IOPort
hm2/hm2_7i76e.0:     IO Pin 025 (P2-05): IOPort
hm2/hm2_7i76e.0:     IO Pin 026 (P2-06): IOPort
hm2/hm2_7i76e.0:     IO Pin 027 (P2-07): IOPort
hm2/hm2_7i76e.0:     IO Pin 028 (P2-08): IOPort
hm2/hm2_7i76e.0:     IO Pin 029 (P2-09): IOPort
hm2/hm2_7i76e.0:     IO Pin 030 (P2-10): IOPort
hm2/hm2_7i76e.0:     IO Pin 031 (P2-11): IOPort
hm2/hm2_7i76e.0:     IO Pin 032 (P2-12): IOPort
hm2/hm2_7i76e.0:     IO Pin 033 (P2-13): IOPort
hm2/hm2_7i76e.0:     IO Pin 034 (P3-01): IOPort
hm2/hm2_7i76e.0:     IO Pin 035 (P3-14): IOPort
hm2/hm2_7i76e.0:     IO Pin 036 (P3-02): IOPort
hm2/hm2_7i76e.0:     IO Pin 037 (P3-15): IOPort
hm2/hm2_7i76e.0:     IO Pin 038 (P3-03): IOPort
hm2/hm2_7i76e.0:     IO Pin 039 (P3-16): IOPort
hm2/hm2_7i76e.0:     IO Pin 040 (P3-04): IOPort
hm2/hm2_7i76e.0:     IO Pin 041 (P3-17): IOPort
hm2/hm2_7i76e.0:     IO Pin 042 (P3-05): IOPort
hm2/hm2_7i76e.0:     IO Pin 043 (P3-06): IOPort
hm2/hm2_7i76e.0:     IO Pin 044 (P3-07): IOPort
hm2/hm2_7i76e.0:     IO Pin 045 (P3-08): IOPort
hm2/hm2_7i76e.0:     IO Pin 046 (P3-09): IOPort
hm2/hm2_7i76e.0:     IO Pin 047 (P3-10): IOPort
hm2/hm2_7i76e.0:     IO Pin 048 (P3-11): IOPort
hm2/hm2_7i76e.0:     IO Pin 049 (P3-12): IOPort
hm2/hm2_7i76e.0:     IO Pin 050 (P3-13): IOPort
hm2/hm2_7i76e.0: registered
Found file(REL): ./custom.hal
(0, ' = ', '/usr/bin/gmoccapy')
(1, ' = ', '-ini')
(2, ' = ', '/home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.ini')
**** GMOCCAPY GETINIINFO **** 
Preference file path: /home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.pref
**** GMOCCAPY GETINIINFO **** 
 No DEFAULT_SPINDLE_SPEED entry found in [DISPLAY] of INI file
**** GMOCCAPY GETINIINFO **** 
No MAX_RAPID_OVERRIDE entry found in [DISPLAY] of INI file 
 Default settings 100 % applied!
/usr/bin/gmoccapy:283: GtkWarning: Invalid icon size 48

  self.widgets.window1.show()
**** GMOCCAPY INFO ****
**** No gmoccapy2.glade file present ****
['ntb_preview', 'box_coolant_and_spindle', 'box_tool_and_code_info', 'ntb_preview']
**** GMOCCAPY INFO ****
**** audio available! ****
**** GMOCCAPY INFO ****
**** No virtual keyboard installed, we checked for <onboard> and <matchbox-keyboard>.
/usr/bin/gladevcp:185: GtkWarning: IA__gtk_radio_button_set_group: assertion '!g_slist_find (group, radio_button)' failed
  builder.add_from_file(xmlname)
**** GMOCCAPY GETINIINFO **** 
Preference file path: /home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.pref
No option 'gtk_theme' in section: 'DEFAULT'
**** GMOCCAPY GETINIINFO **** 
**** GMOCCAPY GETINIINFO **** 
Preference file path: /home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.pref
Preference file path: /home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.pref
No option 'gtk_theme' in section: 'DEFAULT'
No option 'gtk_theme' in section: 'DEFAULT'
**** GMOCCAPY GETINIINFO **** 
Preference file path: /home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.pref
No option 'gtk_theme' in section: 'DEFAULT'
**** GMOCCAPY INFO ****
**** no valid probe config in INI File ****
**** disabled tool measurement ****
Xlib.protocol.request.QueryExtension
Xlib.protocol.request.QueryExtension
Xlib.protocol.request.QueryExtension
Xlib.protocol.request.QueryExtension
**** GMOCCAPY INFO: Gcode.lang found ****

(gmoccapy:3894): GtkSourceView-CRITICAL **: gtk_source_language_manager_set_search_path: assertion 'lm->priv->ids == NULL' failed
**** GMOCCAPY GETINIINFO **** 
Wrong entry [DISPLAY] CYCLE_TIME in INI File!
Will use gmoccapy default 150
**** GMOCCAPY INFO : inifile = /home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.ini ****:
**** GMOCCAPY INFO : postgui halfile = gmoccapy_postgui.hal ****:
/usr/bin/gladevcp:295: GtkWarning: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17
  gtk.main()
estoping / killing gmoccapy
task: main loop took 0.122415 seconds
task: main loop took 0.184479 seconds
Shutting down and cleaning up LinuxCNC...
Running HAL shutdown script
task: 9476 cycles, min=0.000026, max=0.184479, avg=0.010109, 2 latency excursions (> 10x expected cycle time of 0.010000s)
hm2_eth: HostMot2 ethernet driver unloaded
hm2: unloading
Note: Using POSIX realtime
jd@plasma1 ~ $