jan@JBCNC:~/linuxcnc/configs/Test_set-up$ linuxcnc Test_set-up.ini LINUXCNC - 2.7.8 Machine configuration directory is '/home/jan/linuxcnc/configs/Test_set-up' Machine configuration file is 'Test_set-up.ini' Starting LinuxCNC... . Found file(REL): ./Test_set-up.hal Found file(REL): ./custom.hal INFO CLASSICLADDER- No ladder GUI requested-Realtime runs till HAL closes. Found file(REL): ./toolchange_index.hal **** GMOCCAPY GETINIINFO **** Preference file path: /home/jan/linuxcnc/configs/Test_set-up/Test_set-up.pref [] **** GMOCCAPY GETINIINFO **** No DEFAULT_SPINDLE_SPEED entry found in [DISPLAY] of INI file /usr/bin/gmoccapy:237: GtkWarning: Invalid icon size 48 self.widgets.window1.show() **** GMOCCAPY INFO **** **** No gmoccapy2.glade file present **** ERROR, trying to initialize the user tabs or panaels, check for typos ['notebook_mode'] **** GMOCCAPY INFO **** **** audio available! **** **** GMOCCAPY INFO **** **** No virtual keyboard installed, we checked for and . **** GMOCCAPY INFO **** **** no valid probe config in INI File **** **** disabled tool measurement **** **** GMOCCAPY INFO: Gcode.lang found **** (gmoccapy:8521): GtkSourceView-CRITICAL **: gtk_source_language_manager_set_search_path: assertion `lm->priv->ids == NULL' failed **** GMOCCAPY GETINIINFO **** Wrong entry [DISPLAY] CYCLE_TIME in INI File! Will use gmoccapy default 150 **** GMOCCAPY INFO : inifile = /home/jan/linuxcnc/configs/Test_set-up/Test_set-up.ini ****: **** GMOCCAPY INFO : postgui halfile = postgui_call_list.hal ****: postgui_call_list.hal:6: Pin 'gladevcp.spindle-speed' does not exist Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 94 cycles, min=0.000004, max=0.056260, avg=0.009382, 0 latency excursions (> 10x expected cycle time of 0.010000s) LinuxCNC terminated with an error. You can find more information in the log: /home/jan/linuxcnc_debug.txt and /home/jan/linuxcnc_print.txt as well as in the output of the shell command 'dmesg' and in the terminal jan@JBCNC:~/linuxcnc/configs/Test_set-up$ ^C jan@JBCNC:~/linuxcnc/configs/Test_set-up$