Another GUI project underway

More
05 Aug 2018 23:44 #115655 by grijalvap
Nice work, please keep it going..
The following user(s) said Thank You: Lcvette, kcj
More
07 Aug 2018 17:03 #115759 by giz
Replied by giz on topic Another GUI project underway
This looks SO GOOD and I would love to use it on my new retrofit (18 pocket ATC)
The following user(s) said Thank You: Lcvette
More
08 Aug 2018 00:07 #115775 by Lcvette
just an update sorry for the delays, alot going on in the backscenes with the GUI, but not all of it is showable, alot is some pretty cool QML code Turboss is working on to make some motion with the ATC carousel. but still in its early development.

anyways, here is the ATC page, obviously this is pretty much the same as the PP atc so if you guys see anything besides the tool count in the carousel please let us know! we have made graphics for 8, 10, 12, 16 and I suppose we can do an 18 as well :)

thoughts?

Attachments:
The following user(s) said Thank You: tommylight, emilvv, racedirector, kcj, chrisrusk, Robi63, snoozer77
More
08 Aug 2018 05:08 #115789 by tommylight
That is awesomely awesome !!! :)
The following user(s) said Thank You: Lcvette, kcj
More
08 Aug 2018 07:25 #115792 by Lcvette
updated to new button colors, these seem to read easier!

Attachments:
The following user(s) said Thank You: tommylight, giz, racedirector, Arpad, kcj
More
09 Aug 2018 03:49 #115837 by Nitram
Replied by Nitram on topic Another GUI project underway
Very exciting stuff!
Ultimately what do you think the final scope of the tool table will be?
For example, I have a retrofitted mill with a 21 tool carousel.
Do you envisage the number of tools in the table/carousel being user definable or being
limited to a finite set?
Thanks and again, very interesting cannot wait to see it rolled out!
The following user(s) said Thank You: Lcvette
More
09 Aug 2018 04:02 #115839 by Lcvette

Nitram wrote: Very exciting stuff!
Ultimately what do you think the final scope of the tool table will be?
For example, I have a retrofitted mill with a 21 tool carousel.
Do you envisage the number of tools in the table/carousel being user definable or being
limited to a finite set?
Thanks and again, very interesting cannot wait to see it rolled out!


Graphically it depends on adding the graphics and tool# boxes and code additions, but the remap coding for the ATC can be done without the GUI, which I'm assuming you already have setup. The tool table will have a set number just because it needs a set number to define the table..ie, can't leave that blank..lol. Need to see what the Max number of tools lcnc can accept, but I would imagine 250 or 500 or 1000 depending on any limits set by the software.
More
14 Aug 2018 06:11 #116022 by Lcvette
been a few days, had a weekend vacation and am now back on the project with my fellow code-fu partners in crime! small update for viewing but took a while to hash out how to do the customer sliders being so new to the coding world.. and now we have the sliders linked to the input/output boxes and override buttons whoo hoo! slowly but surely making progress! any update is a good update in my opinion so here you go until the next one!

Attachments:
The following user(s) said Thank You: tommylight, kcj
More
14 Aug 2018 06:25 #116023 by AnnoyingMutt
Good to see progress.

I'm digging this one.
The following user(s) said Thank You: Lcvette
More
14 Aug 2018 06:31 #116024 by Lcvette
and a few fun pictures because i couldn't resist the urge to see what it would look like on the machine controller..lol





Attachments:
The following user(s) said Thank You: tommylight, giz, racedirector, kcj
Time to create page: 0.247 seconds
Powered by Kunena Forum