For AndyPugh
- tommylight
- Topic Author
- Away
- Moderator
Less
More
- Posts: 18767
- Thank you received: 6309
04 Oct 2016 21:58 #81235
by tommylight
For AndyPugh was created by tommylight
Did you get an e-mail from me? I sent it quite a long time ago but got no reply.
Moderators, please delete this if it is not appropriate.
Regards,
Tom
Moderators, please delete this if it is not appropriate.
Regards,
Tom
Please Log in or Create an account to join the conversation.
07 Oct 2016 12:23 - 07 Oct 2016 12:25 #81334
by andypugh
Replied by andypugh on topic For AndyPugh
No, I don't think I ever saw it.
(unless you asked for a "connection request". I have been ignoring those as I have no idea what they are. They seem to have no affect on whether you can send a private email or not)
(unless you asked for a "connection request". I have been ignoring those as I have no idea what they are. They seem to have no affect on whether you can send a private email or not)
Last edit: 07 Oct 2016 12:25 by andypugh.
Please Log in or Create an account to join the conversation.
- tommylight
- Topic Author
- Away
- Moderator
Less
More
- Posts: 18767
- Thank you received: 6309
07 Oct 2016 14:07 #81342
by tommylight
Replied by tommylight on topic For AndyPugh
I got to the same conclusion in both cases!
I did send an email using the forum, with a short answer : "yes"
I will send another e-mail from my phone so you get my address, might need it later.
On a side note, i will start a retrofit for a 6 meter cnc with live tooling ( 8 positions, rotating) on Sunday, so i will start a thread here. It is for profile tubes, 2 or 3 of those tools are at a 90 degree angel, should be interesting.
Thank you very much for everything.
With utmost respect,
Tom
I did send an email using the forum, with a short answer : "yes"
I will send another e-mail from my phone so you get my address, might need it later.
On a side note, i will start a retrofit for a 6 meter cnc with live tooling ( 8 positions, rotating) on Sunday, so i will start a thread here. It is for profile tubes, 2 or 3 of those tools are at a 90 degree angel, should be interesting.
Thank you very much for everything.
With utmost respect,
Tom
Please Log in or Create an account to join the conversation.
09 Oct 2016 21:19 #81478
by andypugh
Replied by andypugh on topic For AndyPugh
Still nothing. Just use andy at bodgesoc,org
Please Log in or Create an account to join the conversation.
- tommylight
- Topic Author
- Away
- Moderator
Less
More
- Posts: 18767
- Thank you received: 6309
09 Oct 2016 23:11 #81489
by tommylight
Replied by tommylight on topic For AndyPugh
Will do, thank you.
Please Log in or Create an account to join the conversation.
Time to create page: 0.064 seconds