Contraves spu manual

More
06 Sep 2019 18:36 #144404 by CNCDoc
Contraves spu manual was created by CNCDoc
Does anyone have the manual for Contraves SPU?
Has problems with the positioning of the spindle when changing the tool.

Attachments:

Please Log in or Create an account to join the conversation.

More
07 Sep 2019 06:06 #144452 by pl7i92
Replied by pl7i92 on topic Contraves spu manual
Deutsches Profukt
warum schreibst du die Firma nicht direkt an
die produzieren doch noch steuerungen

da sollte doch ein anschlussplan dabei sein
ich sehe im hintergrund die Schaltpläne

Meine erfahrung mit MAHO und Heidenhain ist das die Elkos auszutauschen sind
auch sind die Pot's ALLE zu Bewegen vorher wert messen um die grundeinstellung wieder herzustellen
mit der Zeit geben die Falsche werte aus

Please Log in or Create an account to join the conversation.

More
07 Sep 2019 13:38 #144475 by CNCDoc
Replied by CNCDoc on topic Contraves spu manual
Have contacted contraves but received no response

Please Log in or Create an account to join the conversation.

More
07 Sep 2019 14:03 #144476 by Mike_Eitel
Replied by Mike_Eitel on topic Contraves spu manual
Contraves is Rheinmetall...
Doubt that they even remember CNC ;-(

Please Log in or Create an account to join the conversation.

More
07 Sep 2019 14:44 - 07 Sep 2019 14:47 #144477 by pl7i92
Replied by pl7i92 on topic Contraves spu manual
they have changed 3 times company and name i think there is rely no paper left of this part
it coudt be outsorced as Haidenhein did with the older stuff
i woudt try it atr the spare part outsource company
www.secker-antriebstechnik.de/‎


DID you try the elktronic company direct
TWK-ELEKTRONIK GmbH
www.twk.de/support-und-service/kontakt/
Last edit: 07 Sep 2019 14:47 by pl7i92.

Please Log in or Create an account to join the conversation.

More
10 Sep 2019 07:51 - 13 Sep 2019 10:31 #144679 by CNCDoc
Replied by CNCDoc on topic Contraves spu manual
Have emailed many now not found anyone yet .. : - /
What can SPU mean?

Edit: Spindel positionig unit
Last edit: 13 Sep 2019 10:31 by CNCDoc.

Please Log in or Create an account to join the conversation.

Time to create page: 0.277 seconds
Powered by Kunena Forum