(superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
- tommylight
-
Topic Author
- Away
- Moderator
-
Less
More
- Posts: 17767
- Thank you received: 5905
12 Feb 2020 09:54 #157145
by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
Can you paste the debug info, please.
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
Less
More
- Posts: 17767
- Thank you received: 5905
12 Feb 2020 10:52 #157155
by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
WARNING:
Do not change the title of the topic when replying to it, please.
Had a shock when i saw a title i could not recognize started by me !!!
Do not change the title of the topic when replying to it, please.
Had a shock when i saw a title i could not recognize started by me !!!
Please Log in or Create an account to join the conversation.
12 Feb 2020 10:55 #157156
by phillc54
Replied by phillc54 on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
It would be nice if that could be prevented...WARNING:
Do not change the title of the topic when replying to it, please.
Had a shock when i saw a title i could not recognize started by me !!!
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- BeagleBrainz
-
- Offline
- User is blocked
-
Less
More
- Posts: 1437
- Thank you received: 570
12 Feb 2020 10:56 #157157
by BeagleBrainz
Replied by BeagleBrainz on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
How the hell does that happen ?
I can see the subject box, but wow changing a title doesn't seem right.
I can see the subject box, but wow changing a title doesn't seem right.
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
Less
More
- Posts: 17767
- Thank you received: 5905
12 Feb 2020 10:58 #157158
by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
aaaaand it's back !!!
Now i have to edit the original post to set it back, again!
I agree that this should be prevented, it causes a mess for searching with the added load on the server when adding another copy of the same topic to the database.
Now i have to edit the original post to set it back, again!
I agree that this should be prevented, it causes a mess for searching with the added load on the server when adding another copy of the same topic to the database.
The following user(s) said Thank You: Clive S
Please Log in or Create an account to join the conversation.
12 Feb 2020 11:38 - 12 Feb 2020 11:40 #157162
by Clive S
Ok I have put the above on a stick using Win32DiskImager everything went to plan and just worked.
Q. What is the difference between the two iso's . ie the one above and the one from the 11th LinuxMint-19.2-LCNC-2.9-rt-4.16.12-kona-amd64
Thanks again for the hard work you are putting into this.
Replied by Clive S on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
Files now available, as usual tested in Vbox
md5: 86 bytes (86 bytes)
drive.google.com/open?id=1jcSdgUkSubGNo8oRt_acU_0sjqCFJZyN
iso: 2.3 GB (2340421632 bytes):
drive.google.com/open?id=17f4FhtF5hayFpumpNHrGFyJ0OQlRb9aT
Enjoy
Ok I have put the above on a stick using Win32DiskImager everything went to plan and just worked.
Q. What is the difference between the two iso's . ie the one above and the one from the 11th LinuxMint-19.2-LCNC-2.9-rt-4.16.12-kona-amd64
Thanks again for the hard work you are putting into this.
Last edit: 12 Feb 2020 11:40 by Clive S.
The following user(s) said Thank You: BeagleBrainz
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
Less
More
- Posts: 17767
- Thank you received: 5905
12 Feb 2020 11:42 #157163
by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
This one has working QTVCP already installed.Q. What is the difference between the two iso's . ie the one above and the one from the 11th LinuxMint-19.2-LCNC-2.9-rt-4.16.12-kona-amd64
The following user(s) said Thank You: BeagleBrainz
Please Log in or Create an account to join the conversation.
- BeagleBrainz
-
- Offline
- User is blocked
-
Less
More
- Posts: 1437
- Thank you received: 570
12 Feb 2020 11:53 - 12 Feb 2020 11:55 #157166
by BeagleBrainz
Replied by BeagleBrainz on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
I'll try to do a change log type post when I through up a new version.
Next one, hopefully, will be a RTAI version. Had some issues with Andy's test linuxcnc packages relating to qtvcp designer. Posted up on the thread to see if there's some I screwed up.
Am currently building Linuxcnc 2.9 rtai packages and will see how it goes.
Once again big thanks to all who have downloaded the images and given them a twirl. Very much appreciated.
Cheers
Rob
Next one, hopefully, will be a RTAI version. Had some issues with Andy's test linuxcnc packages relating to qtvcp designer. Posted up on the thread to see if there's some I screwed up.
Am currently building Linuxcnc 2.9 rtai packages and will see how it goes.
Once again big thanks to all who have downloaded the images and given them a twirl. Very much appreciated.
Cheers
Rob
Last edit: 12 Feb 2020 11:55 by BeagleBrainz.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
Less
More
- Posts: 17767
- Thank you received: 5905
12 Feb 2020 12:00 #157168
by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
Just downloaded the new iso, will give it a run later, right after i check Phill's.
The following user(s) said Thank You: BeagleBrainz
Please Log in or Create an account to join the conversation.
- BeagleBrainz
-
- Offline
- User is blocked
-
Less
More
- Posts: 1437
- Thank you received: 570
12 Feb 2020 12:25 #157173
by BeagleBrainz
Replied by BeagleBrainz on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
No worries Tommy, should go all ok.
Should have the RTAI done tomorrow morning, finished compiling the 2.9 RTAI Linuxcnc packages, qtvcp designer runs ok.
Kinda glad I've setup a local repo for the packages, saves having to wait to get packages off the net.
Wonder if it's worth doing an XFCE version...............
Should have the RTAI done tomorrow morning, finished compiling the 2.9 RTAI Linuxcnc packages, qtvcp designer runs ok.
Kinda glad I've setup a local repo for the packages, saves having to wait to get packages off the net.
Wonder if it's worth doing an XFCE version...............
Please Log in or Create an account to join the conversation.
Time to create page: 0.176 seconds