×
Forum Header
Mach 3 conversion to Stepconf Wizard
02 Feb 2015 22:27 - 04 Feb 2015 00:00 #55585
by cle
Replied by cle on topic Mach 3 conversion to Stepconf Wizard
Hello BigJohnT
Would you mind convert my mach3 XML file too, please ?
will use it for a Shapeoko2 and need a xyyz (xyz-y)config
Thanks a lot,
best regards,
cle
[edit] originally attached the XML in a RAR, don't know why it got lost (:
sorry for the inconvenience (:
Would you mind convert my mach3 XML file too, please ?
will use it for a Shapeoko2 and need a xyyz (xyz-y)config
Thanks a lot,
best regards,
cle
[edit] originally attached the XML in a RAR, don't know why it got lost (:
sorry for the inconvenience (:
Last edit: 04 Feb 2015 00:00 by cle.
The topic has been locked.
- LaCharbonnerie
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
06 Feb 2015 09:08 #55731
by LaCharbonnerie
Replied by LaCharbonnerie on topic Mach 3 conversion to Stepconf Wizard
Hello all,
I've been playing around with an old CharlyRobot with obsolete controllers and drivers. I replace them with Leadshine MX3660 and LinuxCNC but there something wrong with the stepconf I tuned from the datasheet and manuals. Fortunately it comes with a Mach3 xml configuration file, and as I can see I found the right spot to get some help.
Here is the attachement, thanks in advance !
David
I've been playing around with an old CharlyRobot with obsolete controllers and drivers. I replace them with Leadshine MX3660 and LinuxCNC but there something wrong with the stepconf I tuned from the datasheet and manuals. Fortunately it comes with a Mach3 xml configuration file, and as I can see I found the right spot to get some help.
Here is the attachement, thanks in advance !
David
The topic has been locked.
- FlyingThinkTank
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
10 Mar 2015 04:29 #56604
by FlyingThinkTank
Replied by FlyingThinkTank on topic Mach 3 conversion to Stepconf Wizard
I, too, need a conversion from Mach 3 to LinuxCNC. Thank you in advance!
The topic has been locked.
17 Apr 2015 21:07 #57863
by Baithog
Replied by Baithog on topic Mach 3 conversion to Stepconf Wizard
Thanks for all of the support you have given us neophytes for so long. I am taking the acquisition of a newer computer to make the switch to LinuxCNC. Right off the bat, Stepconf wants timing information for my Chinese motor controllers that I don't have. Hopefully that info is buried in this XML file.
Larry
Larry
The topic has been locked.
27 Apr 2015 23:58 - 28 Apr 2015 00:24 #58167
by cgboehm
Replied by cgboehm on topic Mach 3 conversion to Stepconf Wizard
Will you convert mine too? Thanks!
-Cole
-Cole
Last edit: 28 Apr 2015 00:24 by cgboehm.
The topic has been locked.
13 May 2015 13:19 #58618
by dazza0101
Replied by dazza0101 on topic Mach 3 conversion to Stepconf Wizard
Will be extremely grateful if you can convert this one for me please. I don't know where I was going wrong the last time I tried, but just couldn't get it to work.
The topic has been locked.
26 May 2015 03:15 #59031
by Serpentus
Replied by Serpentus on topic Mach 3 conversion to Stepconf Wizard
Hi BigJohnT, Could you please convert my file also? (Maybe you forgot to do it before xD). If you can't, then thanks anyways, but please tell me to format that partition and use it for something else..
It's a Syil x7 plus from the year 2014 with 4 axis, XYZA. (Just adding the model and year just in case someone has the same machine and also wants the file).
The Mach3 configuration is in metric by the way.
Thanks a lot!
It's a Syil x7 plus from the year 2014 with 4 axis, XYZA. (Just adding the model and year just in case someone has the same machine and also wants the file).
The Mach3 configuration is in metric by the way.
Thanks a lot!
The topic has been locked.
01 Jun 2015 09:27 #59290
by palmfans
Replied by palmfans on topic Mach 3 conversion to Stepconf Wizard
Hi John, could you help convering the MX4660 Mach 3 file for me.
Thanks a lot.
palmfans
Thanks a lot.
palmfans
The topic has been locked.
- racedirector
- Offline
- Elite Member
Less
More
- Posts: 267
- Thank you received: 41
08 Jun 2015 19:57 #59623
by racedirector
Replied by racedirector on topic Mach 3 conversion to Stepconf Wizard
Hi there BigJohnT
Would appreciate the conversion of my Mach3 settings, I have included the 2 I use in the zip, the main and mostly used one is the metric one (Mach3 doesn't play nicely just using G20/G21)
Cheers
Bruce
Would appreciate the conversion of my Mach3 settings, I have included the 2 I use in the zip, the main and mostly used one is the metric one (Mach3 doesn't play nicely just using G20/G21)
Cheers
Bruce
The topic has been locked.
12 Jun 2015 13:13 #59739
by Marfil
Replied by Marfil on topic Mach 3 conversion to Stepconf Wizard
Hi. Cuold I send you my xml file? Thanks a lot.
The topic has been locked.
Time to create page: 0.454 seconds