Error after CLOSING linuxcnc

More
7 years 2 months ago #141487 by jazzuri
Error after CLOSING linuxcnc was created by jazzuri
Hello! i tried to run gantry machine, and it's working fine. But an error occurs after closing linuxcnc (ver. 2.9):

Attachment not found



i think, problem with file /usr/bin/linuxcnc..
p.s. plz don't look at vfd.
Thanks in advance!

Please Log in to join the conversation.

More
7 years 2 months ago #141493 by tommylight
Replied by tommylight on topic Error after CLOSING linuxcnc
It should be OK to ignore that for now, did not have time to check what is causing that yet.

Please Log in to join the conversation.

More
7 years 2 months ago #141495 by jazzuri
Replied by jazzuri on topic Error after CLOSING linuxcnc

tommylight wrote: It should be OK to ignore that for now, did not have time to check what is causing that yet.

okay, thank you, but is there any way to disable this error?

Please Log in to join the conversation.

More
7 years 2 months ago #141497 by tommylight
Replied by tommylight on topic Error after CLOSING linuxcnc
It is hard to pinpoint as it does not happen to all users, you are the second one having that issue.
I did check on 3 of my computers/ laptops and none of them have that issue.
Can you post exactly what version of Linux and Linuxcnc are you using, what config for the VFD etc.
So far it looks like it is related to RS485 VFD control, but that is just a stab in the dark so far.

Please Log in to join the conversation.

More
7 years 2 months ago #141498 by jazzuri
Replied by jazzuri on topic Error after CLOSING linuxcnc

tommylight wrote: It is hard to pinpoint as it does not happen to all users, you are the second one having that issue.
I did check on 3 of my computers/ laptops and none of them have that issue.
Can you post exactly what version of Linux and Linuxcnc are you using, what config for the VFD etc.
So far it looks like it is related to RS485 VFD control, but that is just a stab in the dark so far.

yes! but I am sure that vfd has nothing to do with this, since this error existed before its configuration and connection.

linuxcnc ver. 2.9.0-pre0 master-rt (updated from 2.7.14 distr - debian wheezy).
kernel 3.4-9-rtai-686-pae (3.4.55-4linuxcnc i686 GNU)

p.s. commented vfd - error still occurs

Attachment not found

Please Log in to join the conversation.

More
7 years 2 months ago #141499 by tommylight
Replied by tommylight on topic Error after CLOSING linuxcnc
Thank you.
Did you compile Linuxcnc, or just chnged the repository and installed using apt-get or synaptics ?

Please Log in to join the conversation.

More
7 years 2 months ago #141500 by jazzuri
Replied by jazzuri on topic Error after CLOSING linuxcnc
in addition to the above, there are the following notes because of gantry..
Code:
Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.5 LINUXCNC - 2.9.0-pre0-373-gb0b2758 Machine configuration directory is '/home/mdrives/linuxcnc/configs/BVR' Machine configuration file is 'BVR.ini' INIFILE=/home/mdrives/linuxcnc/configs/BVR/BVR.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI= DISPLAY=axis COORDINATES=X Y Y Z KINEMATICS=trivkins coordinates=xyyz Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Found file(REL): ./BVR.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: axis [color=red]Warning: Forward kinematics must handle duplicate coordinate letters:yy Note: Individual axis homing is not currently supported for KINEMATICS_IDENTITY with duplicate axis letter <Y>[/color] Shutting down and cleaning up LinuxCNC... task: 664 cycles, min=0.000018, max=0.015740, avg=0.009890, 0 latency excursions (> 10x expected cycle time of 0.010000s) Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments

maybe that's it.

Please Log in to join the conversation.

More
7 years 2 months ago #141501 by jazzuri
Replied by jazzuri on topic Error after CLOSING linuxcnc

tommylight wrote: Thank you.
Did you compile Linuxcnc, or just chnged the repository and installed using apt-get or synaptics ?

just changed the repository and apt-get update/install linuxcnc.

Please Log in to join the conversation.

More
7 years 2 months ago #141503 by tommylight
Replied by tommylight on topic Error after CLOSING linuxcnc
At the
KINEMATICS=trivkins coordinates=xyyz
Line there should be something else added containing the word "BOTH", can not recall exactly what and i am not near computers.

Please Log in to join the conversation.

More
7 years 2 months ago #141506 by jazzuri
Replied by jazzuri on topic Error after CLOSING linuxcnc

tommylight wrote: At the
KINEMATICS=trivkins coordinates=xyyz
Line there should be something else added containing the word "BOTH", can not recall exactly what and i am not near computers.

all right, there is a line "kinstype=BOTH" in .ini file

Please Log in to join the conversation.

Time to create page: 0.054 seconds
Powered by Kunena Forum