Ballscrew dustcover recommendation

More
7 years 3 weeks ago #147351 by Louis Cypher
Ballscrew dustcover recommendation was created by Louis Cypher
Dear Forum,

I have a gantry type 3 axis milling machine. Since I will machine a lot of foam I want to protect the ballscrews from dust and chips. Can you point me to good solutions to do so? I was thinking of a bellow type cover.

Thanks in advance,

Louis

Please Log in to join the conversation.

  • piasdom
  • New Member
  • New Member
More
7 years 3 weeks ago #147352 by piasdom
Replied by piasdom on topic Ballscrew dustcover recommendation
the bellow is probably the best way i think. i have two that i'm not using you can have.
not sure how to give address here, but you're welcome to them.

Please Log in to join the conversation.

More
7 years 3 weeks ago #147357 by Louis Cypher
Replied by Louis Cypher on topic Ballscrew dustcover recommendation
That sounds great! I'll try to send a private message

Please Log in to join the conversation.

  • piasdom
  • New Member
  • New Member
More
7 years 3 weeks ago #147358 by piasdom
Replied by piasdom on topic Ballscrew dustcover recommendation
good luck :) cause i don't know how here

Please Log in to join the conversation.

More
7 years 3 weeks ago #147388 by BigJohnT
Replied by BigJohnT on topic Ballscrew dustcover recommendation
Private Messages (PM) is not possible on the forum.

JT

Please Log in to join the conversation.

  • piasdom
  • New Member
  • New Member
More
7 years 3 weeks ago #147400 by piasdom
Replied by piasdom on topic Ballscrew dustcover recommendation
Thanks John

Please Log in to join the conversation.

More
7 years 3 weeks ago #147441 by Louis Cypher
Replied by Louis Cypher on topic Ballscrew dustcover recommendation
If you are on RepRap Forum or Thingiverse: I have the same User Name in both of them

Please Log in to join the conversation.

More
7 years 3 weeks ago #147445 by pl7i92
Replied by pl7i92 on topic Ballscrew dustcover recommendation
make your own one
svenhb.bplaced.net/?CNC___Fraese_3___Faltenbalg
80


search for FALTENBALK on Goo... or YT

Please Log in to join the conversation.

More
7 years 3 weeks ago #147448 by Louis Cypher
Replied by Louis Cypher on topic Ballscrew dustcover recommendation
Cool, that's what I will do! The paper version should be easy to produce on a laser cutter. Anybody here knows a source for Tyvek paper?

Found some. No need to search

Please Log in to join the conversation.

  • piasdom
  • New Member
  • New Member
More
7 years 3 weeks ago #147450 by piasdom
Replied by piasdom on topic Ballscrew dustcover recommendation
or thingverse, i found the message area. :)

Please Log in to join the conversation.

Time to create page: 0.056 seconds
Powered by Kunena Forum