linuxcncrsh invalid -i option

hi at all,

at the end of my hal file I write:
but when run linuxcncrsh with option in terminal like these: it return the follow error:
....... the ini file have the original pyvcp file and panel yet ..... and run on JA9 .... Lcnc2.7 ubuntu 10.04 ..... not understaND these error...


someone can help me to understand??

You probably need to separate the LinuxCNC_Options with --

Example (using joints_axes11):
Ref: Note:
The most recent joints_axes updates for linuxcncrsh (emcrsh.cc) are in the
branch joints_axes11. These updates support teleop (world) jogging

Ref:
git.linuxcnc.org/gitweb?p=linuxcnc.git;a...021650b24d4a67f0265e
Updating for joints_axes:
buildbot.linuxcnc.org/doc/scratch/v2.8.0...nc.html#_linuxcncrsh

linuxcncrsh --port 5007 --name k1 --connectpw pw enablepw ena -- -ini /home/k1/folder/myini.ini

--connectpw pw enablepw ena -- -ini....... this is an error or is the correct structures?

1) linuxcncrsh --port 5007 --name k1 --connectpw pw enablepw ena -- -ini /home/k1/folder/myini.ini (<--- there is no error)
2)]linuxcncrsh --port 5007 --name k1 --connectpw pw --enablepw ena -- -ini /home/k1/folder/myini.ini ( <--- correct form)

i try JA11 today -- real tanks


An other question ..... I have a tkinker error too .... because toll changer window try to appear in any situation ..... on ini file on DISPLAY=linuxcncrsh ...... if cancell introtime and gif linuxcncrsh give me other error ...... so not change it.

Giorgio

The correct form is:
In my tests i find that this message:

linuxcncsrh -i invalid option

is an erroneous _warning_ (not an error) and can be ignored.
The warning is issued by the main linuxcnc script --
i will try to fix it later for the joints_axes branch.

An other question ..... I have a tkinker error too .... because toll changer window try to appear in any situation ..... on ini file on DISPLAY=linuxcncrsh ...... if cancell introtime and gif linuxcncrsh give me other error ...... so not change it.

Not sure what you are seeing since you did not post the text of the
error message(s).

However, note that if you connect to linuxcncrsh by telneting from another
machine you must have support for remote X display working in order
to use items like:
So -- it is appropriate to NOT use these items if you do not
have X enabled to the machine using telnet. Enabling X to the
machine using telnet is not specifically a LinuxCNC issue
but depends on the setup of both machines.

sorry my redicolous error .... iI forgot to delete the toolchange lines hal file (loadusr -w tollchanger.......) the tkinker error is disappear...

linuxcncrsh --port 5007 --name k1 --connectpw pw --enablepw ena -- -ini /home/k1/folder/myini.ini

ok tanks but the warning is stable ..... today or tomorrow i Try JA11 ....

regards
giorgio

Is possible to use linuxcncrsh with standard tcpi connection or with ssh connection??

How? where see the right command?

regards
Giorgio

Is possible to use linuxcncrsh with standard tcpi connection or with ssh connection?

Examples:

First, setup remote host
(name is: the_remote ==192.168.0.41 for my test),
and start LinuxCNC on the_remote using ini file with:
Example session using telnet from client to the_remote
(with default linuxcncrsh port 5007)
Example session using ssh from client to the_remote
(using port 9999 on localhost and linuxcncrsh default port 5007)

I try to connect with qtcpsocket client..... but I've not clear the termination string...... is fifth to send for example...... "set estop on\\r\\n"???

Regards
Giorgio

I am sure it will be quite a simple protocol.

I can recommend Wireshark (used to be called Ethereal) as a packet sniffer.
Used it successfully in the past to reverse engineer an IPCam windoze only IE based interface, so that I could write a Linux Qt based one for it.

Or you may simply be able to connect using something like Cutecom instead of telnet and just switch the display to hex, to see the packet strings in full, including terminations.

regards

I saw all thanks .... but one thing take rather long to do .... I have to send all commands and get all the answers in order to make a " library" of commands and responses .... I do not think in facts there are many applicants sending and receiving packets ... later place an example for the get estop command ....

the schermata:




Acctually I use qprocess (not in these png file when I use terminal) and "tee" command for to have a clear response file where to read ....

if I can not understand (I not understand ... for shure ArkEye understand very well ... sorry for my first version of post) .... a simple trick to using and codify direct tcp connection (without having to re-implement again the telnet connection .... we would telnetlib or libtelnet for this ...) I can't delete qprocess and use only QTcpSocket ...

sorry for my english junk .... I do not mean to offend you .... i correct the last row of post ....

Regards
Giorgio