Feed override net to rapid override

Hey guys,

I am looking for a nice solution of connecting the feed override with the rapid.

I would like to control both Actions with one rotary switch.
Feed override is now working with a rotary, so i only need to link the commands in hal, but HOW?

Thanks in advance,

Joel

feed override
halui.feed−override.count−enable bit in (default: TRUE)

When TRUE, modify feed override when counts changes.

halui.feed−override.counts s32 in

counts X scale = feed override percentage

halui.feed−override.decrease bit in

pin for decreasing the FO (−=scale)

halui.feed−override.direct−value bit in

pin to enable direct value feed override input

halui.feed−override.increase bit in

pin for increasing the FO (+=scale)

halui.feed−override.scale float in

pin for setting the scale on changing the FO

halui.feed−override.value float out

current Feed Override value

rapid override
halui.rapid−override.count−enable bit in (default: TRUE)

When TRUE, modify Rapid Override when counts changes.

halui.rapid−override.counts s32 in

counts X scale = Rapid Override percentage

halui.rapid−override.decrease bit in

pin for decreasing the Rapid Override (−=scale)

halui.rapid−override.direct−value bit in

pin to enable direct value Rapid Override input

halui.rapid−override.increase bit in

pin for increasing the Rapid Override (+=scale)

halui.rapid−override.scale float in

pin for setting the scale on changing the Rapid Override

halui.rapid−override.value float out

current Rapid Override value

JB-Motoring wrote: Feed override is now working with a rotary, so i only need to link the commands in hal, but HOW?

For every line in the HAL that says something like

net signal-name halui.feed-overide,xxxx

Edit to say

net signal-name halui.feed-overide,xxxx halui.rapid-override.xxxxx

I can't find any net'd feed-overrides in my hal.

The only feed-override commands are setp for the rotary switches inputs.


Thank you

If feed override is working then it must be netted. Maybe you are looking in the wrong HAL file?

Hey Andy,

I finally got it working, i didnt See the last part to be netted.
Thank you very much for all the help )

Is there also a possibility to adjust the delay of the rapid override?
It seems, that the feed override reacts a bit faster.

I couldn't find a setp Name for that.

Thank you guys!

I am not sure what you mean by "delay". There shouldn't really be any delay.

Hey Andy,

It seems, that the feed override is a maybe a few ms quicker than the rapid.

But I think that this shouldn't be a Problem at all. Maybe the sliders Update a bit different.

Thank you

I suspect that the actual override happens before the GUI updates.

That is my thought, too.

I will try it out in Action tomorrow

Thank you