CAD drawings of Mesa Boards

Anyone have cad drawings of the mesa boards? I want to do schematics up in Autocad.

thanks,

/edit I have done some prelim drawings of some Mesa cards. I have attached the cad files and pdf's.

Note: the 7i77 needs some more work. I will do wiring diagrams with the cards also and upload to this thread.

The layout of each board is on the last page of each manual if that is what you mean.

JT

Hi John,

No, I am doing schematics showing wire connections. I want an accurate dxf so I can cad out the wiring. I started doing them myself in case nobody has them.

I will post them in my build thread when I finish them.

Thanks,

Bob

BigJohnT wrote: The layout of each board is on the last page of each manual if that is what you mean.

JT

Actually, thats exactly what I need. Print page to pdf, import into cad, cleanup and VOILA....

Thanks John.

Uploaded cad files for Mesa cards and my system I am working on in the first post of this thread.

Check the pdf if you see any errors.

I will be working on wiring diagrams with these cards in the upcoming days. This will reflect my system retrofit, but I am releasing cad files so you can use them if you like.

bevins wrote: Uploaded cad files for Mesa cards and my system I am working on in the first post of this thread.

Check the pdf if you see any errors.

I will be working on wiring diagrams with these cards in the upcoming days. This will reflect my system retrofit, but I am releasing cad files so you can use them if you like.

Bevins, where did you upload them to?

rodw wrote:

bevins wrote: Uploaded cad files for Mesa cards and my system I am working on in the first post of this thread.

Check the pdf if you see any errors.

I will be working on wiring diagrams with these cards in the upcoming days. This will reflect my system retrofit, but I am releasing cad files so you can use them if you like.

Bevins, where did you upload them to?

Sorry, found them on your first post above. This one for the 7i76e might help you. Some of the connector names change but much of the board is the same.
forum.linuxcnc.org/27-driver-boards/3191...76e-connection-sheet

It's not exactly what was asked for but I have a partial 3D model of the 7i76. It has the PCB with connectors and fixings but not the D connector and I didn't bother overlaying the compt ident as it was just for making a cabinet assembly.

Did it in Solidworks but could be exported to other formats if anyone would find it useful, either as it is or to take further. Screenshot attached.

Murray

THere are some 7i77 Eagle files and PDF's here
robotech.lt/?p=46

rodw wrote: THere are some 7i77 Eagle files and PDF's here
robotech.lt/?p=46

I got all the boards drawn up now,

Thanks...

Bob