Does anyone have a Mesa 7i76e for sale?

Looking for 1 or more Mesa 7i76e boards. If you have 1 or more you would like to sell please let me know.
Thanks

TG_Imagineer wrote:

Looking for 1 or more Mesa 7i76e boards. If you have 1 or more you would like to sell please let me know.
Thanks

It might help if you say where you are based in the world

Your right, a location would help...
Ohio USA

i'm also looking for such a board
i'm from belgium

There are some Mesa 7i96S on eusurplus in Portugal, it is similar to 7i76E, but has less I/O and not sure about the analog spindle control.
It has expansion ports, IDC26 and RS422/485, so more I/O is as easy as adding a 7i84 through a UTP/LAN cable.
eusurplus.com/index.php?route=product/pr...62_71&product_id=159
Same goes for the other side of the pond, mesaus has 5 of them in stock right now:
mesaus.com/product/7i96s/

I'm also looking for such a board. I'm from germany.
Does anyone know when new 7i76e are on the market again?

at eusurplus.com you can buy one for the moment

If you add a 7i84 to the 7i96S you add 32 inputs and 16 outputs to the 7i96S
The 7I96S is a Ethernet connected motion control interface designed for interfacing up to 5 Axis of step&dir step motor or servo motor drives. Step rates up to 10 MHz are supported. The 7I96S also has 11 isolated inputs plus 6 isolated outputs for general purpose I/O use. A high speed encoder interface is provided for spindle synchronized motion and an isolated analog spindle output allows spindle speed control . A RS-422/RS485 serial port and a parallel port are provided for I/O expansion .

I should have some 7i84 stock in a few weeks I think.

JT

i'm from europe
and i like to buy at least one 7i84 but like you say not in stoch also not in stock at eusurplus in spanje
inform me when you have one and what are the delivery conditions

eusurplus is in Portugal, as far as i know.