Ask - 7i96_7i74d.bin

More
3 years 10 months ago #260402 by zz912
Ask - 7i96_7i74d.bin was created by zz912
Helllo,

Can I ask for firmware 7i96_7i74d.bin ?

For new card 7i96s this firmware exist, but for old 7i96 not.

zz912

Please Log in to join the conversation.

More
3 years 10 months ago #260409 by PCW
Replied by PCW on topic Ask - 7i96_7i74d.bin
 

Attachment not found

Please Log in to join the conversation.

More
3 years 10 months ago #260413 by zz912
Replied by zz912 on topic Ask - 7i96_7i74d.bin
Wow, that was speed. Thanks thanks.

Please Log in to join the conversation.

More
3 years 10 months ago #260417 by zz912
Replied by zz912 on topic Ask - 7i96_7i74d.bin
Hello,

I have bad news. I tried flash.
Code:
jarda@CNC1:~$ mesaflash Mesaflash version 3.4.6 Configuration and diagnostic tool for Mesa Electronics PCI(E)/ETH/EPP/USB/SPI boards Try 'mesaflash --help' for more information jarda@CNC1:~$ sudo mesaflash --device 7i96 --addr 10.10.10.10 --readhmid [sudo] heslo pro jarda: Configuration Name: HOSTMOT2 General configuration information:   BoardName : MESA7I96   FPGA Size: 9 KGates   FPGA Pins: 144   Number of IO Ports: 3   Width of one I/O port: 17   Clock Low frequency: 100.0000 MHz   Clock High frequency: 200.0000 MHz   IDROM Type: 3   Instance Stride 0: 4   Instance Stride 1: 64   Register Stride 0: 256   Register Stride 1: 256 Modules in configuration:   Module: DPLL   There are 1 of DPLL in configuration   Version: 0   Registers: 7   BaseAddress: 7000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: WatchDog   There are 1 of WatchDog in configuration   Version: 0   Registers: 3   BaseAddress: 0C00   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: IOPort   There are 3 of IOPort in configuration   Version: 0   Registers: 5   BaseAddress: 1000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: StepGen   There are 5 of StepGen in configuration   Version: 2   Registers: 10   BaseAddress: 2000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: QCount   There are 1 of QCount in configuration   Version: 2   Registers: 5   BaseAddress: 3000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: SSerial   There are 1 of SSerial in configuration   Version: 0   Registers: 6   BaseAddress: 5B00   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 64 bytes   Module: SSR   There are 1 of SSR in configuration   Version: 0   Registers: 2   BaseAddress: 7D00   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: LED   There are 1 of LED in configuration   Version: 0   Registers: 1   BaseAddress: 0200   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes Configuration pin-out: IO Connections for TB3 -> 7I96_0 Pin#                  I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir TB3-1                   0   IOPort       None            TB3-2                   1   IOPort       None            TB3-3                   2   IOPort       None            TB3-4                   3   IOPort       None            TB3-5                   4   IOPort       None            TB3-6                   5   IOPort       None            TB3-7                   6   IOPort       None            TB3-8                   7   IOPort       None            TB3-9                   8   IOPort       None            TB3-10                  9   IOPort       None            TB3-11                 10   IOPort       None            TB3-13,14              11   IOPort       SSR              0        Out-00          (Out) TB3-15,16              12   IOPort       SSR              0        Out-01          (Out) TB3-17,18              13   IOPort       SSR              0        Out-02          (Out) TB3-19,20              14   IOPort       SSR              0        Out-03          (Out) TB3-21,22              15   IOPort       SSR              0        Out-04          (Out) TB3-23,24              16   IOPort       SSR              0        Out-05          (Out) IO Connections for TB1/TB2 -> 7I96_1 Pin#                  I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir TB1-2,3                17   IOPort       StepGen          0        Step/Table1     (Out) TB1-4,5                18   IOPort       StepGen          0        Dir/Table2      (Out) TB1-8,9                19   IOPort       StepGen          1        Step/Table1     (Out) TB1-10,11              20   IOPort       StepGen          1        Dir/Table2      (Out) TB1-14,15              21   IOPort       StepGen          2        Step/Table1     (Out) TB1-16,17              22   IOPort       StepGen          2        Dir/Table2      (Out) TB1-20,21              23   IOPort       StepGen          3        Step/Table1     (Out) TB1-22,23              24   IOPort       StepGen          3        Dir/Table2      (Out) TB2-2,3                25   IOPort       StepGen          4        Step/Table1     (Out) TB2-4,5                26   IOPort       StepGen          4        Dir/Table2      (Out) TB2-7,8                27   IOPort       QCount           0        Quad-A          (In) TB2-10,11              28   IOPort       QCount           0        Quad-B          (In) TB2-13,14              29   IOPort       QCount           0        Quad-IDX        (In) TB2-16,17              30   IOPort       SSerial          0        RXData0         (In) TB2-18,19              31   IOPort       SSerial          0        TXData0         (Out) Internal-TXEn          32   IOPort       SSerial          0        TXEn0           (Out) Internal               33   IOPort       SSR              0        AC Ref          (Out) IO Connections for P1 -> 7I96_2 Pin#                  I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir P1-01/DB25-01          34   IOPort       None            P1-02/DB25-14          35   IOPort       None            P1-03/DB25-02          36   IOPort       None            P1-04/DB25-15          37   IOPort       None            P1-05/DB25-03          38   IOPort       None            P1-06/DB25-16          39   IOPort       None            P1-07/DB25-04          40   IOPort       None            P1-08/DB25-17          41   IOPort       None            P1-09/DB25-05          42   IOPort       None            P1-11/DB25-06          43   IOPort       None            P1-13/DB25-07          44   IOPort       None            P1-15/DB25-08          45   IOPort       None            P1-17/DB25-09          46   IOPort       None            P1-19/DB25-10          47   IOPort       None            P1-21/DB25-11          48   IOPort       None            P1-23/DB25-12          49   IOPort       None            P1-25/DB25-13          50   IOPort       None            jarda@CNC1:~$ pwd /home/jarda jarda@CNC1:~$ ls Dokumenty  linuxcnc            linuxcnc_print.txt  Plocha   Šablony  Videa Hudba      linuxcnc_debug.txt  Obrázky             Stažené  Veřejné jarda@CNC1:~$ cd linuxcnc/ jarda@CNC1:~/linuxcnc$ ls configs  linuxcnc-2.8  Mesa-firmware  nc_files jarda@CNC1:~/linuxcnc$ cd Mesa-firmware/ jarda@CNC1:~/linuxcnc/Mesa-firmware$ ls 7i96  7i96s jarda@CNC1:~/linuxcnc/Mesa-firmware$ cd 7i96 jarda@CNC1:~/linuxcnc/Mesa-firmware/7i96$ ls configs jarda@CNC1:~/linuxcnc/Mesa-firmware/7i96$ cd configs/ jarda@CNC1:~/linuxcnc/Mesa-firmware/7i96/configs$ ls hostmot2 jarda@CNC1:~/linuxcnc/Mesa-firmware/7i96/configs$ cd hostmot2/ ls bash: cd: příliš mnoho argumentů jarda@CNC1:~/linuxcnc/Mesa-firmware/7i96/configs$ cd hostmot2/ |ls hostmot2 jarda@CNC1:~/linuxcnc/Mesa-firmware/7i96/configs$ cd hostmot2/ jarda@CNC1:~/linuxcnc/Mesa-firmware/7i96/configs/hostmot2$ ls PIN_7I96_7I74D_51.vhd  7i96d_1pwm.pin     7i96_inmd.pin        7i96_5abob_inmd.bit  7i96_7i77d.bit source                 7i96_fallback.bit  7i96_inm_7i85sd.bit  7i96_5abob_inmd.pin  7i96_7i78d.bit 7i96d.bit              7i96_fallback.pin  7i96_pktd.bit        7i96_6enc_d.bit      7i96_7i78d.pin 7i96d.pin              7i96_g540dpl.bit   7i96_pktd.pin        7i96_6enc_d.pin      7i96_7i85d.bit 7i96dpl.bit            7i96_inmd.bit      7i96_p1inmd.bit      7i96_7i74d.bit       7i96_7i85sd.bit 7i96_dsti.bit          7i96_inmd_dp.bit   7i96_5abob_d.bit     7i96_7i76d.bit       7i96_7i85sinmd.bit 7i96d_1pwm.bit         7i96_inmd_dp.pin   7i96_5abob_d.pin     7i96_7i76d.pin       7i96_7i89d.bit jarda@CNC1:~/linuxcnc/Mesa-firmware/7i96/configs/hostmot2$ sudo mesaflash --device 7i96 --addr 10.10.10.10 --write 7i96_7i74d.bit Checking file... OK   File type: Xilinx bit file Boot sector OK FLASH memory sectors to write: 6, max sectors in area: 16 Erasing FLASH memory sectors starting from 0x100000...   |EEEEE

Process stuck and LED IN1 is flashing.

I am waiting over 10 minutes. What should I do now? CTRL+C ?

Please Log in to join the conversation.

More
3 years 10 months ago #260418 by PCW
Replied by PCW on topic Ask - 7i96_7i74d.bin
Yes control C and retry

Please Log in to join the conversation.

More
3 years 10 months ago #260419 by zz912
Replied by zz912 on topic Ask - 7i96_7i74d.bin
Good news. I tried it again and it works:
Code:
jarda@CNC1:~/linuxcnc/Mesa-firmware/7i96/configs/hostmot2$ sudo mesaflash --device 7i96 --addr 10.10.10.10 --readhmid Configuration Name: HOSTMOT2 General configuration information:   BoardName : MESA7I96   FPGA Size: 9 KGates   FPGA Pins: 144   Number of IO Ports: 3   Width of one I/O port: 17   Clock Low frequency: 100.0000 MHz   Clock High frequency: 200.0000 MHz   IDROM Type: 3   Instance Stride 0: 4   Instance Stride 1: 64   Register Stride 0: 256   Register Stride 1: 256 Modules in configuration:   Module: DPLL   There are 1 of DPLL in configuration   Version: 0   Registers: 7   BaseAddress: 7000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: WatchDog   There are 1 of WatchDog in configuration   Version: 0   Registers: 3   BaseAddress: 0C00   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: IOPort   There are 3 of IOPort in configuration   Version: 0   Registers: 5   BaseAddress: 1000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: StepGen   There are 5 of StepGen in configuration   Version: 2   Registers: 10   BaseAddress: 2000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: QCount   There are 1 of QCount in configuration   Version: 2   Registers: 5   BaseAddress: 3000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: SSerial   There are 1 of SSerial in configuration   Version: 0   Registers: 6   BaseAddress: 5B00   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 64 bytes   Module: SSR   There are 1 of SSR in configuration   Version: 0   Registers: 2   BaseAddress: 7D00   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: LED   There are 1 of LED in configuration   Version: 0   Registers: 1   BaseAddress: 0200   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes Configuration pin-out: IO Connections for TB3 -> 7I96_0 Pin#                  I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir TB3-1                   0   IOPort       None            TB3-2                   1   IOPort       None            TB3-3                   2   IOPort       None            TB3-4                   3   IOPort       None            TB3-5                   4   IOPort       None            TB3-6                   5   IOPort       None            TB3-7                   6   IOPort       None            TB3-8                   7   IOPort       None            TB3-9                   8   IOPort       None            TB3-10                  9   IOPort       None            TB3-11                 10   IOPort       None            TB3-13,14              11   IOPort       SSR              0        Out-00          (Out) TB3-15,16              12   IOPort       SSR              0        Out-01          (Out) TB3-17,18              13   IOPort       SSR              0        Out-02          (Out) TB3-19,20              14   IOPort       SSR              0        Out-03          (Out) TB3-21,22              15   IOPort       SSR              0        Out-04          (Out) TB3-23,24              16   IOPort       SSR              0        Out-05          (Out) IO Connections for TB1/TB2 -> 7I96_1 Pin#                  I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir TB1-2,3                17   IOPort       StepGen          0        Step/Table1     (Out) TB1-4,5                18   IOPort       StepGen          0        Dir/Table2      (Out) TB1-8,9                19   IOPort       StepGen          1        Step/Table1     (Out) TB1-10,11              20   IOPort       StepGen          1        Dir/Table2      (Out) TB1-14,15              21   IOPort       StepGen          2        Step/Table1     (Out) TB1-16,17              22   IOPort       StepGen          2        Dir/Table2      (Out) TB1-20,21              23   IOPort       StepGen          3        Step/Table1     (Out) TB1-22,23              24   IOPort       StepGen          3        Dir/Table2      (Out) TB2-2,3                25   IOPort       StepGen          4        Step/Table1     (Out) TB2-4,5                26   IOPort       StepGen          4        Dir/Table2      (Out) TB2-7,8                27   IOPort       QCount           0        Quad-A          (In) TB2-10,11              28   IOPort       QCount           0        Quad-B          (In) TB2-13,14              29   IOPort       QCount           0        Quad-IDX        (In) TB2-16,17              30   IOPort       SSerial          0        RXData0         (In) TB2-18,19              31   IOPort       SSerial          0        TXData0         (Out) Internal-TXEn          32   IOPort       SSerial          0        TXEn0           (Out) Internal               33   IOPort       SSR              0        AC Ref          (Out) IO Connections for P1 -> 7I96_2 Pin#                  I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir P1-01/DB25-01          34   IOPort       SSerial          0        RXData1         (In) P1-02/DB25-14          35   IOPort       SSerial          0        RXData2         (In) P1-03/DB25-02          36   IOPort       SSerial          0        RXData3         (In) P1-04/DB25-15          37   IOPort       SSerial          0        RXData4         (In) P1-05/DB25-03          38   IOPort       SSerial          0        TXData1         (Out) P1-06/DB25-16          39   IOPort       SSerial          0        TXData2         (Out) P1-07/DB25-04          40   IOPort       SSerial          0        TXData3         (Out) P1-08/DB25-17          41   IOPort       SSerial          0        TXData4         (Out) P1-09/DB25-05          42   IOPort       SSerial          0        RXData5         (In) P1-11/DB25-06          43   IOPort       SSerial          0        RXData6         (In) P1-13/DB25-07          44   IOPort       SSerial          0        RXData7         (In) P1-15/DB25-08          45   IOPort       None            P1-17/DB25-09          46   IOPort       SSerial          0        TXData5         (Out) P1-19/DB25-10          47   IOPort       SSerial          0        TXData6         (Out) P1-21/DB25-11          48   IOPort       SSerial          0        TXData7         (Out) P1-23/DB25-12          49   IOPort       None            P1-25/DB25-13          50   IOPort       None 

Thank you.

Please Log in to join the conversation.

More
3 years 10 months ago #260420 by PCW
Replied by PCW on topic Ask - 7i96_7i74d.bin
Yes, you may have a 5V power issue if it stops mid-programming.
Luckily the fallback (blinking light) allows recovery

Please Log in to join the conversation.

More
3 years 10 months ago #260421 by zz912
Replied by zz912 on topic Ask - 7i96_7i74d.bin
I dont need it, but I have question.
Physical:
7i96 have 1 RX/TX
7i74 have 8 RX/TX

but in firmware 7i96_7i74d.bin
7i96 use 1 RX/TX
7i74 use "only 7" RX/TX

Is it intentional?

Please Log in to join the conversation.

More
3 years 10 months ago #260422 by PCW
Replied by PCW on topic Ask - 7i96_7i74d.bin
Yes, the 7I96 FPGA cannot fit 2 instances of sserial ports, so only one instance
is present. Since each port has a maximum of 8 channels, and since the sserial
channel on the 7I96 is used, there are only 7 channels free.

The 7I96S has a larger FPGA so it has 2 sserial ports:
Port 0 with 1 channel on the 7I96S
Port 1 with 8 channels on the 7I74.

Please Log in to join the conversation.

More
3 years 10 months ago #260423 by zz912
Replied by zz912 on topic Ask - 7i96_7i74d.bin
You're probably right about the source. We have a temporary source there now. It should be 2A. But the voltage on it is only 4.82V and there is only Mesa 7i96 on it.

Please Log in to join the conversation.

Time to create page: 0.056 seconds
Powered by Kunena Forum