7i95 board for 5ABoB(not T or S) firmware missing

More
1 year 7 months ago #324788 by Nathan40
7i95 board for 5ABoB(not T or S) firmware missing was created by Nathan40
Hi all

i could not find 7i95 board with 5ABoB (not the T or S) board firmware on the mesa website. Please share if possible with stepgens for the 5ABoB with inputs.

Please Log in to join the conversation.

More
1 year 7 months ago #324789 by tommylight
Replied by tommylight on topic 7i95 board for 5ABoB(not T or S) firmware missing
Did you use mesaflash to check what is already in it?

Please Log in to join the conversation.

More
1 year 7 months ago #324792 by Nathan40
Replied by Nathan40 on topic 7i95 board for 5ABoB(not T or S) firmware missing
Hi

Thanks for your response. It has regular pins for the 7i95 hardware with the parallel ports having I/O pins.Please help with the bitfiles with stepgens ans inputs as they are not available on the mesa website.

Please Log in to join the conversation.

More
1 year 7 months ago #324800 by PCW
Replied by PCW on topic 7i95 board for 5ABoB(not T or S) firmware missing
What I/O do you actually need?
 
The 7I95 is fairly limited so a full 5ABOB configuration will not fit.

5ABOB inputs will be available with the standard firmware
as are GPIO outputs. It may be possible to make a configuration
that fits and does what you need by eliminating unused features.

 

Please Log in to join the conversation.

More
1 year 7 months ago #324803 by Nathan40
Replied by Nathan40 on topic 7i95 board for 5ABoB(not T or S) firmware missing
I need stepgens on 2 (step) 3 (direction) , 4 (step) 5 (direction), 6 (step) 7 (direction), 10 11 15 pins as inputs for the pins of 5 Abob.

Please Log in to join the conversation.

More
1 year 7 months ago #324804 by PCW
Replied by PCW on topic 7i95 board for 5ABoB(not T or S) firmware missing
The inputs already work.

That number of stepgens will not fit a standard 7I95 configuration

Do you use all the encoder channels?

Do you use the sserial channels?

(The added stepgens might fit by eliminating unused features)

Please Log in to join the conversation.

More
1 year 7 months ago #324808 by Nathan40
Replied by Nathan40 on topic 7i95 board for 5ABoB(not T or S) firmware missing
I need the stepgens on the BoB for the 7i95.

Please Log in to join the conversation.

More
1 year 7 months ago #324810 by PCW
Replied by PCW on topic 7i95 board for 5ABoB(not T or S) firmware missing
Do you use all the encoder channels?

Do you use the sserial channels?

When you say you want the stepgens on the BOB
do you mean you need 9 stepgens total or just
the three on the BOB?

If you need 9 stepgens total, some other feature like
encoders or sserial ports must go.

Please Log in to join the conversation.

More
1 year 7 months ago #324854 by Nathan40
Replied by Nathan40 on topic 7i95 board for 5ABoB(not T or S) firmware missing
That is correct. 9 stepgens (6 for the main hardware + 3 for the BoB).

 

Please Log in to join the conversation.

More
1 year 7 months ago #324941 by Nathan40
Replied by Nathan40 on topic 7i95 board for 5ABoB(not T or S) firmware missing
Please help as my project is hanging for few days now.
7i95 (not T or S )does not have any 5ABoB bitfiles on the mesa website.

Please Log in to join the conversation.

Time to create page: 0.055 seconds
Powered by Kunena Forum