7i80db 7i77 + 7i76 serup Hal conf

More
1 year 6 months ago #326684 by GDTH
Hello,

I am trying to get a 7i80db-25 working with a 7i77 and a 7i76. I have installed a bitfile that should make this possible. When I start up linuxcnc I am not able to find the 7i77 and 7i76 board in the Hal conf. I was expecting something like hm2_7i80.0.7i77.input.

Am I doing something wrong or is it normal to just have a gpio list. If so how do I know what is connected to what.

 

Please Log in to join the conversation.

More
1 year 6 months ago #326685 by tommylight
What does
mesaflash --device ETHER --readhmid
report?

Please Log in to join the conversation.

More
1 year 6 months ago #326686 by GDTH
mesaflash --device ETHER --readhmid --addr 192.168.1.121 gives:
Code:
Configuration Name: HOSTMOT2 General configuration information:   BoardName : MESA7I80   FPGA Size: 25 KGates   FPGA Pins: 256   Number of IO Ports: 4   Width of one I/O port: 17   Clock Low frequency: 100.0000 MHz   Clock High frequency: 200.0000 MHz   IDROM Type: 3   Instance Stride 0: 4   Instance Stride 1: 64   Register Stride 0: 256   Register Stride 1: 256 Modules in configuration:   Module: WatchDog   There are 1 of WatchDog in configuration   Version: 0   Registers: 3   BaseAddress: 0C00   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: IOPort   There are 4 of IOPort in configuration   Version: 0   Registers: 5   BaseAddress: 1000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: MuxedQCount   There are 16 of MuxedQCount in configuration   Version: 3   Registers: 5   BaseAddress: 3500   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: MuxedQCountSel   There are 1 of MuxedQCountSel in configuration   Version: 0   Registers: 0   BaseAddress: 0000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: StepGen   There are 16 of StepGen in configuration   Version: 2   Registers: 10   BaseAddress: 2000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: SSerial   There are 2 of SSerial in configuration   Version: 0   Registers: 6   BaseAddress: 5A00   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 64 bytes   Module: LED   There are 1 of LED in configuration   Version: 0   Registers: 1   BaseAddress: 0200   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes Configuration pin-out: IO Connections for J2 DB25 pin#             I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir  1                      0   IOPort       StepGen          0        Dir/Table2      (Out) 14                      1   IOPort       StepGen          0        Step/Table1     (Out)  2                      2   IOPort       StepGen          1        Dir/Table2      (Out) 15                      3   IOPort       StepGen          1        Step/Table1     (Out)  3                      4   IOPort       StepGen          2        Dir/Table2      (Out) 16                      5   IOPort       StepGen          2        Step/Table1     (Out)  4                      6   IOPort       StepGen          3        Dir/Table2      (Out) 17                      7   IOPort       StepGen          3        Step/Table1     (Out)  5                      8   IOPort       StepGen          4        Dir/Table2      (Out)  6                      9   IOPort       StepGen          4        Step/Table1     (Out)  7                     10   IOPort       SSerial          0        TXData0         (Out)  8                     11   IOPort       SSerial          0        RXData0         (In)  9                     12   IOPort       SSerial          0        TXData1         (Out) 10                     13   IOPort       SSerial          0        RXData1         (In) 11                     14   IOPort       MuxedQCount      6        MuxQ-IDX        (In) 12                     15   IOPort       MuxedQCount      6        MuxQ-B          (In) 13                     16   IOPort       MuxedQCount      6        MuxQ-A          (In) IO Connections for J3 DB25 pin#             I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir  1                     17   IOPort       StepGen          5        Dir/Table2      (Out) 14                     18   IOPort       StepGen          5        Step/Table1     (Out)  2                     19   IOPort       StepGen          6        Dir/Table2      (Out) 15                     20   IOPort       StepGen          6        Step/Table1     (Out)  3                     21   IOPort       StepGen          7        Dir/Table2      (Out) 16                     22   IOPort       StepGen          7        Step/Table1     (Out)  4                     23   IOPort       StepGen          8        Dir/Table2      (Out) 17                     24   IOPort       StepGen          8        Step/Table1     (Out)  5                     25   IOPort       StepGen          9        Dir/Table2      (Out)  6                     26   IOPort       StepGen          9        Step/Table1     (Out)  7                     27   IOPort       SSerial          0        TXData2         (Out)  8                     28   IOPort       SSerial          0        RXData2         (In)  9                     29   IOPort       SSerial          0        TXData3         (Out) 10                     30   IOPort       SSerial          0        RXData3         (In) 11                     31   IOPort       MuxedQCount      7        MuxQ-IDX        (In) 12                     32   IOPort       MuxedQCount      7        MuxQ-B          (In) 13                     33   IOPort       MuxedQCount      7        MuxQ-A          (In) IO Connections for J4 DB25 pin#             I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir  1                     34   IOPort       SSerial          1        TXEn2           (Out) 14                     35   IOPort       SSerial          1        TXData2         (Out)  2                     36   IOPort       SSerial          1        RXData2         (In) 15                     37   IOPort       SSerial          1        TXData1         (Out)  3                     38   IOPort       SSerial          1        RXData1         (In) 16                     39   IOPort       SSerial          1        TXData0         (Out)  4                     40   IOPort       SSerial          1        RXData0         (In) 17                     41   IOPort       MuxedQCountSel   0        MuxSel0         (Out)  5                     42   IOPort       MuxedQCount      0        MuxQ-A          (In)  6                     43   IOPort       MuxedQCount      0        MuxQ-B          (In)  7                     44   IOPort       MuxedQCount      0        MuxQ-IDX        (In)  8                     45   IOPort       MuxedQCount      1        MuxQ-A          (In)  9                     46   IOPort       MuxedQCount      1        MuxQ-B          (In) 10                     47   IOPort       MuxedQCount      1        MuxQ-IDX        (In) 11                     48   IOPort       MuxedQCount      2        MuxQ-A          (In) 12                     49   IOPort       MuxedQCount      2        MuxQ-B          (In) 13                     50   IOPort       MuxedQCount      2        MuxQ-IDX        (In) IO Connections for J5 DB25 pin#             I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir  1                     51   IOPort       SSerial          1        TXEn5           (Out) 14                     52   IOPort       SSerial          1        TXData5         (Out)  2                     53   IOPort       SSerial          1        RXData5         (In) 15                     54   IOPort       SSerial          1        TXData4         (Out)  3                     55   IOPort       SSerial          1        RXData4         (In) 16                     56   IOPort       SSerial          1        TXData3         (Out)  4                     57   IOPort       SSerial          1        RXData3         (In) 17                     58   IOPort       MuxedQCountSel   6        MuxSel0         (Out)  5                     59   IOPort       MuxedQCount      3        MuxQ-A          (In)  6                     60   IOPort       MuxedQCount      3        MuxQ-B          (In)  7                     61   IOPort       MuxedQCount      3        MuxQ-IDX        (In)  8                     62   IOPort       MuxedQCount      4        MuxQ-A          (In)  9                     63   IOPort       MuxedQCount      4        MuxQ-B          (In) 10                     64   IOPort       MuxedQCount      4        MuxQ-IDX        (In) 11                     65   IOPort       MuxedQCount      5        MuxQ-A          (In) 12                     66   IOPort       MuxedQCount      5        MuxQ-B          (In) 13                     67   IOPort       MuxedQCount      5        MuxQ-IDX        (In)

Please Log in to join the conversation.

More
1 year 6 months ago #326688 by tommylight
OK,
Mesa 7i76 to connector J2
Mesa 7i77 to connector J4

Please Log in to join the conversation.

More
1 year 6 months ago #326689 by GDTH
i already have that.
Or able to see that from the data?

Please Log in to join the conversation.

More
1 year 6 months ago #326691 by tommylight
Do they show in "show hal configuration" from the "machine" menu?

Please Log in to join the conversation.

More
1 year 6 months ago #326692 by GDTH
in case the hal and ini files are needed

Please Log in to join the conversation.

More
1 year 6 months ago #326693 by GDTH
do you mean this?

Please Log in to join the conversation.

More
1 year 6 months ago #326694 by tommylight
Try setting all sserial to 000000 instead of 000xxx in the loadrt line, to many sserials enabled in the firmware so might be disabled with x.

Please Log in to join the conversation.

More
1 year 6 months ago #326695 by GDTH
just did that, made no difference to how to hal conf looks like :?

Please Log in to join the conversation.

Time to create page: 0.106 seconds
Powered by Kunena Forum