parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found

More
6 years 5 months ago #169241 by msageryd
parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found was created by msageryd
I installed LCNC 2.8 which has 7i96 support in pncconf. Made a rough config and tried to start LCNC. Got a weird error about a missing pin. It seems like the board is found, though.

I'm totally new to LCNC, this was a rough start.

From the error report:
Code:
hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 192.168.1.121: Hardware address: 00:60:1b:16:01:71 hm2_eth: discovered 7I96 hm2/hm2_7i96.0: Smart Serial Firmware Version 43 hm2/hm2_7i96.0: 51 I/O Pins used: . . ./HighZ.hal:10: parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found

From the HAL file:
Code:
setp [HMOT](CARD0).watchdog.timeout_ns 5000000

From the ini file:
Code:
[HMOT] CARD0=hm2_7i76e.0

Please Log in to join the conversation.

More
6 years 5 months ago #169245 by tommylight
Replied by tommylight on topic parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found
Does 7i76E have field power applied ?

Please Log in to join the conversation.

More
6 years 5 months ago #169246 by PCW
Replied by PCW on topic parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found
Did you select 7i96 in pncconf?

I just tested with the latest version of 2.8 and its OK

Did you try updating to the latest 2.8 version?

Please Log in to join the conversation.

More
6 years 5 months ago #169248 by tommylight
Replied by tommylight on topic parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found

msageryd wrote: From the error report:

Code:
hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 192.168.1.121: Hardware address: 00:60:1b:16:01:71 hm2_eth: discovered 7I96 hm2/hm2_7i96.0: Smart Serial Firmware Version 43 hm2/hm2_7i96.0: 51 I/O Pins used: . . ./HighZ.hal:10: parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found

Must be going blind....
The error says 7i76e, the rest is 7i96, so just replacing the 7i76e with 7i96 in the hal file should do the trick.

Please Log in to join the conversation.

More
6 years 5 months ago #169249 by msageryd
Replied by msageryd on topic parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found
@tommylight: Yes, and thanks!!
When I read your question I got confused. I don't have a 7i76, but a 7i96.

It's probably a bug in the new pncconfig which leaves the wrong device name in the ini file. I corrected the name and now it works.

From the corrected ini file:
Code:
[HMOT] CARD0=hm2_7i96.0

Please Log in to join the conversation.

More
6 years 5 months ago #169250 by PCW
Replied by PCW on topic parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found
This does seem to be fixed in the latest 2.8 (at least it works for me)

Please Log in to join the conversation.

More
6 years 5 months ago #169251 by msageryd
Replied by msageryd on topic parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found
I'm at build 5914 which I installed yesterday.

Please Log in to join the conversation.

More
6 years 5 months ago #169253 by PCW
Replied by PCW on topic parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found
Maybe it a buildbot thing but I just fetched and rebuilt and there is no issue

Please Log in to join the conversation.

More
6 years 5 months ago #169256 by tommylight
Replied by tommylight on topic parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found

msageryd wrote: @tommylight: Yes, and thanks!!
When I read your question I got confused. I don't have a 7i76, but a 7i96.

The title said 7i76e, the error said the same thing, so i came to the conclusion you have a 7i76e! :)
Walks like a duck, quacks like a duck, it s a duck ! :)

Please Log in to join the conversation.

More
6 years 5 months ago #169268 by Clive S
Replied by Clive S on topic parameter or pin 'hm2_7i76e.0.watchdog.timeout_ns' not found

Walks like a duck, quacks like a duck, it s a duck ! :)


I think you are understanding English too well now Tom:woohoo:

Please Log in to join the conversation.

Time to create page: 1.656 seconds
Powered by Kunena Forum