FIXED*** When installing the linux cnc OS I had the ethernet port connected to the internet. When doing a new install with it disconnected it worked. Some errors come up (see page 5 of thread), but try to get through them and it works.
Ive installed linuxcnc before successfully with my mesa card, but recently changed to a new computer and after a fresh install of 2.9.1 and following the exact same steps I did before to get my mesa controller running it now puts out the following when launching
Code:
Debug file information:
Note: Using POSIX realtime
hm2_eth: rtapi_app_main: Resource temporarily unavailable (-11)
./Mill.hal:9: waitpid failed /usr/bin/rtapi_app hm2_eth
./Mill.hal:9: /usr/bin/rtapi_app exited without becoming ready
./Mill.hal:9: insmod for hm2_eth failed, returned -1
1818
Stopping realtime threads
Unloading hal components
Note: Using POSIX realtime
Pinging 10.10.10.10 works great
[code]PING 10.10.10.10 (10.10.10.10) 56(84) bytes of data.
64 bytes from 10.10.10.10: icmp_seq=1 ttl=64 time=0.585 ms
64 bytes from 10.10.10.10: icmp_seq=2 ttl=64 time=0.354 ms
64 bytes from 10.10.10.10: icmp_seq=3 ttl=64 time=0.385 ms
64 bytes from 10.10.10.10: icmp_seq=4 ttl=64 time=0.358 ms
64 bytes from 10.10.10.10: icmp_seq=5 ttl=64 time=0.383 ms
64 bytes from 10.10.10.10: icmp_seq=6 ttl=64 time=0.375 ms
64 bytes from 10.10.10.10: icmp_seq=7 ttl=64 time=0.370 ms
64 bytes from 10.10.10.10: icmp_seq=8 ttl=64 time=0.371 ms
64 bytes from 10.10.10.10: icmp_seq=9 ttl=64 time=0.283 ms
64 bytes from 10.10.10.10: icmp_seq=10 ttl=64 time=0.351 ms
^C
--- 10.10.10.10 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9219ms
rtt min/avg/max/mdev = 0.283/0.381/0.585/0.073 ms
while reading through dozens of forum posts I used a command which got the mesa board information and pins through the terminal and it listed all its information successfully. I however forgot the command I used to be able to do again and post the results.
[/code]
