is it possible to embed vismach into gladevcp?

More
8 years 4 months ago #111519 by thang
is it possible to embed vismach into gladevcp? was created by thang
I wonder if Vismach can be embedded into gladevcp like gremlins?

Please Log in to join the conversation.

More
8 years 4 months ago #111619 by andypugh
Replied by andypugh on topic is it possible to embed vismach into gladevcp?
You might be able ti embed it as a standalone tab. But Gremlin is a special widget, rather than a generic thing that is embedded.

So I imagine you would need a version of this file, but importing Vismach rather than Gremlin.

github.com/LinuxCNC/linuxcnc/blob/master...devcp/hal_gremlin.py

Please Log in to join the conversation.

More
8 years 4 months ago #111627 by cmorley
Replied by cmorley on topic is it possible to embed vismach into gladevcp?
With a small change to have vismach export the X window id then it should be embeddable.
I'll look at it when I get time.

Chris M

Please Log in to join the conversation.

More
6 years 6 months ago #164809 by thang
Replied by thang on topic is it possible to embed vismach into gladevcp?
Hey Chris, did you find out the way to export the X window id from vismach module?

Please Log in to join the conversation.

More
6 years 6 months ago #164875 by cmorley
Replied by cmorley on topic is it possible to embed vismach into gladevcp?
I did not find away to have this vismach export X id. It seems tkinker doesn't support that.
I then started trying to convert to Qt and..got side tracked :(
I'm sorry - I'll try to get back to it - I do want the capability in Qtvcp too.

Chris

Please Log in to join the conversation.

More
5 years 10 months ago #192308 by cmorley
Replied by cmorley on topic is it possible to embed vismach into gladevcp?
I did get back to this finally and am having some sucess.
more work to do yet.

Attachment not found

Please Log in to join the conversation.

More
5 years 10 months ago #192404 by cmorley
Replied by cmorley on topic is it possible to embed vismach into gladevcp?
embedded:

Attachment not found



code is still raw

Please Log in to join the conversation.

More
5 years 10 months ago #192408 by tommylight
Replied by tommylight on topic is it possible to embed vismach into gladevcp?

cmorley wrote:
code is still raw

Code looks nice, thank you.

Please Log in to join the conversation.

More
5 years 10 months ago #193600 by thang
Replied by thang on topic is it possible to embed vismach into gladevcp?
That is amazing, did you find a way to export X window from vismach?

Please Log in to join the conversation.

More
5 years 10 months ago #193604 by cmorley
Replied by cmorley on topic is it possible to embed vismach into gladevcp?
No I converted vismach to use pyqt, which can export the X window

Please Log in to join the conversation.

Time to create page: 0.086 seconds
Powered by Kunena Forum