ISO to test: Exegnulinux remasterd with LinuxCNC, a lots of tools and no systemd

Please excuse my ignorance, but what architecture is this for?

amd64 (thanks, added it in the description)

Hm, interesting. Never heard of that distro, thanks.

As TDE was updated to 14.0.9 I uploaded a new release (link in 1. posting). I also added Arduino IDE

Gave it a quick run, it works and it is snappy !

Danke, interessant und funktioniert, das Desktop Hintergrundbild allein ist einen Blick wert, ich habe auch bei devuan wiki hineingeschaut

nebenbei, ich war etwas erstaunt,
Wilkommen
bei der Oberflächenvorbereitung sollte noch deutsch verbessert werden

Good you like it:)

Das TDE Projekt trinitydesktop.org freut sich über jeden, der an der Verbesserung der Übersetzung mitmacht - Kommunikation über die Mailingliste.

Wow this is great. I installed to a partition on my hard drive. As not so great with linux I struggled a bit to work out how to boot it. Then I found that In my existing install sudo update-grub did the trick. I imported my machine config and its running sweet. Thanks

(Note: Check GRUB settings)

I have tried this ISO and it seems to be snappy as Tom says.

But I am having trouble to get it to boot from the HD. I can see all the system files on the drive etc.

Can you please help with getting it to boot from the sata drive.

Edit: I copied the ISO to a USB with Win32DiskImager to make it bootable

Edit: If I install mint on another partition on the hard drive and use the boot menu on that I can then pick the appropriate boot to boot the the Exegnulinux system.

But I don't seem to be able to get the grub on its own.. I get the error PXE-E53 No boot file received