Native CAM - How To Install?

I see many posts on Native CAM... but I am not finding anything on HOW to install it.

I'm trying to help out a friend.

Jerry

forum.linuxcnc.org/nativecam/31659-nativ...-is-features-renamed
forum.linuxcnc.org/nativecam/31659-nativ...atures-renamed#81373

It is mentioned several times in that thread, and in the included HOWTO.

Awesome... I was searching "How to Install" and wasn't finding anything... so hopefully this post will direct others as well.

Thanks!
Jerry

It's been a while since Fernand don't let us know any news, I guess some things are changing around NativeCAM, now it is not possible to install NativeCam through synaptic. I have many requests for improvement, but I would not like to bother him because I feel that Fern will update us soon (perhaps... with the release of linuxcnc 2.8??? maybe )
Floris

Jerry here you have the link to the .deb NativeCam installer from my dropbox:
stretch_nativecam_0.1.14b_all.deb · 1.76 MB
Just use gdebi.
Floris

Thank you!

I was able to download the file... and I extracted it to a directory.

Unfortunately... I'm still fairly new to Linux... so I have no idea what to do now. :huh:

Apparently I have Axis 2.6.13 currently installed. I suppose I should go to the synaptic package manager and search for AXIS and/or LinuxCNC to look for an upgrade.

Jerry

After lunch I'll record a small video with step-by-step instructions so that it can also be a guide for those who make the first steps with LinuxCNC. NativeCam is the LinuxCNC "must have".
Floris

please switch on captions (my english, my spanish...)


Link to NativeCAM: www.dropbox.com/s/4hkekh4bxfv14x3/stretc...0.1.14b_all.deb?dl=0

1) Standalone Usage:
ncam [Options]

Options :
-h | --help this text
(-i | --ini=) inifilename inifile used
(-c | --catalog=) catalog valid catalogs = mill, plasma, lathe
-t | --tab axis and gmoccapy only, put NativeCAM in a new tab

2) To prepare your inifile to use NativeCAM embedded,
a) Start in a working directory with your LinuxCNC configuration ini file
cd /home/"user"/linuxcnc/configs/"yourfolder"

b) Type this command :
ncam -i = "inifilename" -c = "valid catalog for this configuration"

A backup of your inifile will be created before it is modified.

After success, you can use it embedded :
linuxcnc inifilename

Hi,
Thanks for the good video.
I used NativeCam in the past, and want to rebuild it on my current image.
However the link to dropbox in the entries above is not working for me, getting a not found message.
Any chance on getting to that file, in order to follow your instructions??

Thanks,
Frans

here you have the link: www.dropbox.com/s/4hkekh4bxfv14x3/stretc...0.1.14b_all.deb?dl=0

I noticed that Fern reactivated the NativeCAM's official page