How to add 80w laser diode to QtPlasmaC

Hi, I have a working QtPlasmaC with mesa 7i92+BOB and am planning to add 80W Laser Diode which will be like a double head system for cutting plastic and wood for metal sign can anyone help me. 

How?
Provide us with something, anything to go on.

Ok, adding a laser diode to your plasma touch for engraving and cutting.

You are not helping yourself ...
What laser? 80W Diode laser is very expensive. Is it a CO2 laser?
What control signals does it need to work?
Do you intend to use them both at the same time or in the same job, or separate?
etc, etc.
Since you do not give use info, take some pictures or videos, or use smoke signals, but give us some info.

80w is not the output

it uses 2x7.5 laser diodes and a prism

use m62 and m63 to control it.

my plasma has a magnetic breakaway holder.... and I've got other devices I can attach to it (marker pen etc)

I went with an M50 but on its own frame

shop.atomstack.com/products/atomstack-a1...1GwLVREaAr6UEALw_wcB

with air assist. works really well

I use it to cut paper or card or wood templates..... saves wasting steel....

does gaskets too

robertspark wrote:

does gaskets too

Now that is something i need for a local company, can you please share more info on what it can cut regarding gaskets?
Thank you.
New topic?

will do. sep topic a bit later on as I'm out

Hi, tommylight the laser diode is a 80w and I want to add along side my QtPlasmaC  if possible.

It can be added as spindle 2 or spindle 3 in QtPlasmaC.