Shape Library

More
6 years 11 months ago #150872 by phillc54
Shape Library was created by phillc54
Here is a preview of the shape library that is in development.

Please Log in to join the conversation.

  • thefabricator03
  • New Member
  • New Member
More
6 years 11 months ago #150875 by thefabricator03
Replied by thefabricator03 on topic Shape Library
PlasmaC just keeps getting better and better!

Great work Phill.

Please Log in to join the conversation.

More
6 years 11 months ago #150876 by phillc54
Replied by phillc54 on topic Shape Library
Thanks Stefan,

If you think of any shapes that should go in let me know.

Please Log in to join the conversation.

More
6 years 11 months ago #150877 by Grotius
Replied by Grotius on topic Shape Library
@Phill,

very nice to see this ! My compliments !

Please Log in to join the conversation.

More
6 years 11 months ago #150885 by tommylight
Replied by tommylight on topic Shape Library
Nice !

Please Log in to join the conversation.

More
6 years 11 months ago #150889 by rodw
Replied by rodw on topic Shape Library
Awesome Phill. You are on a one man mission to send commercial plasma controllers broke.

Could you array an existing part? Eg. draw 1, cut 20
Could you save commonly run parts into that shape library?

Please Log in to join the conversation.

More
6 years 11 months ago #150920 by tommylight
Replied by tommylight on topic Shape Library

rodw wrote: Could you array an existing part? Eg. draw 1, cut 20

He did that in the video. The part with inner and outer circle and small circles between them.

Please Log in to join the conversation.

More
6 years 11 months ago #150981 by phillc54
Replied by phillc54 on topic Shape Library

Could you array an existing part? Eg. draw 1, cut 20

The GCode from the shapes is generated in a set format so that I could easily read it to create an array.
Normal GCode is not in this format so at this stage it cannot create an array but it is something I am looking at.


Could you save commonly run parts into that shape library?

No, each shape is actually a separate python script that is loaded as a module.

Please Log in to join the conversation.

More
6 years 11 months ago #151012 by fixer
Replied by fixer on topic Shape Library
Haven't anybody considering using NativeCAM? It has all the features that are shown in this video and many more. Plus a nice user interface.
It is also very easy to add new shapes as ngc subs, or you can use external executables to generate gcode.

Please Log in to join the conversation.

  • thefabricator03
  • New Member
  • New Member
More
6 years 11 months ago #151014 by thefabricator03
Replied by thefabricator03 on topic Shape Library
I have never heard of NativeCAM, looking at it now and it looks pretty interesting.

Please Log in to join the conversation.

Time to create page: 0.095 seconds
Powered by Kunena Forum