Ohmic Enable Check Box

I might have found a bug... The ohmic check box doesnt seem to be fully listening. When I uncheck it, the power supply for Ohmic still turns on for Ohmic Test, Probe Test, and when I run a program. Further, the GUI still shows when an Ohmic touch is detected. Plasmac seems to ignore the ohmic touch (because the float switch does trip each time).

Perhaps it's working as intended, but I would have expect disabled to be disabled, meaning I would have expected it to not power on the associated pin (and power supply), and not show any trips in the GUI.

It is working the way I intended which is if disabled PlasmaC ignores the ohmic input as a probing input.

Should it be different... I don't know, I don't use ohmic at this stage.

We'll see what others think.

phillc54 wrote: It is working the way I intended which is if disabled PlasmaC ignores the ohmic input as a probing input.

Should it be different... I don't know, I don't use ohmic at this stage.

We'll see what others think.

Good to know it’s working as intended. I guess maybe it’s semantics, ignore ohmic vs disable ohmic. Was just thinking if you didn’t want ohmic for whatever reason, you probably don’t want the output for it enabled either. Plus I was a bit confused seeing the ohmic still trigger each time ¯\_(ツ)_/¯

snowgoer540 wrote: Good to know it’s working as intended. I guess maybe it’s semantics, ignore ohmic vs disable ohmic. Was just thinking if you didn’t want ohmic for whatever reason, you probably don’t want the output for it enabled either. Plus I was a bit confused seeing the ohmic still trigger each time

I can see wher you are coming from...

snowgoer540 wrote: ¯\_(ツ)_/¯

Sorry I have no idea what you are talking about! :side:

rodw wrote:

snowgoer540 wrote: ¯\_(ツ)_/¯

Sorry I have no idea what you are talking about! :side:

haha, sorry, maybe those aren't allowed here, my phone is set to change "shrug" into that ASCII art, and it's sort of force of habit now.

snowgoer540 wrote:

rodw wrote:

snowgoer540 wrote: ¯\_(ツ)_/¯

Sorry I have no idea what you are talking about! :side:

haha, sorry, maybe those aren't allowed here, my phone is set to change "shrug" into that ASCII art, and it's sort of force of habit now.

NAh its OK just Google Translate drew a blank!

rodw wrote:

snowgoer540 wrote:

rodw wrote:

snowgoer540 wrote: ¯\_(ツ)_/¯

Sorry I have no idea what you are talking about! :side:

haha, sorry, maybe those aren't allowed here, my phone is set to change "shrug" into that ASCII art, and it's sort of force of habit now.

NAh its OK just Google Translate drew a blank!

Don't forget Rod that you are upside down :laugh:

Yeh, I tried compensating for it by turning my chromebook upside down bu the darn thing rotated the screen!

rodw wrote: My ability to break things knows no bounds. ¯\_(ツ)_/¯