Update failure

Hello, I am trying to update Qtplasma and when I update repositories I get this error:  NO_PUBKEY EF1B07FEE0EE663EEl.
Repositori
Binary deb:
Url: buildbot.linuxcnc.org
Distribution: buster
Section: master-rtpreemt.

Sources deb-src:
Url: buildbot.linuxcnc.org/
Distribution: buster
Section: master-rtpreemt.



 

LinuxCNC no longer supports Buster, the last Buster master branch build was July 6th.
buildbot.linuxcnc.org/dists/buster/maste...inary-amd64/?C=M;O=D

To get the latest master branch you would be better off "upgrading" to Bookworm, packages are available on the other buildbot:
buildbot2.highlab.com/

Having said that, it seems the other buildbot has not built master branch since Oct 5th...
 

Gracias por tu respuesta, pero llámame estúpido, pero no puedo descargar la última versión. La versión que se ha descargado es la 1.235.265.
He actualizado Debian 12 a bookworm y el kernel es 6.1.0.26-rt-amd64

You need to set the repository in Synaptic to plus you need to copy the key as shown for the new style. This is all shown here:
buildbot2.highlab.com/
 

Thanks Tom, it took me four goes to get that right...

phillc54 publicación=312436 id de usuario=6129Debe configurar el repositorio en Synaptic para

Code:

deb http://buildbot2.highlab.com/debian/ bookworm master-uspace plus you need to copy the key as shown for the new style. This is all shown here: http://buildbot2.highlab.com/  

Thank you but I am not able to put the keys in. I don't know which file to save them in.
I do sudo nano /etc/apt/trusted.gpg.d. A terminal opens and I paste buildbot-archive-key.gpg but when I try to save it it tells me which file I want to write it in and I don't know which one I should do it in.

If you download the file to the ~/Downloads directory then do the following:

phillc54 wrote:

If you download the file to the ~/Downloads directory then do the following:

Code:

sudo cp ~/Downloads/buildbot-archive-key.gpg /etc/apt/trusted.gpg.d/

 

I do what you tell me but when I go to update the repository I get this error: The repository " buildbot2.highlab.com debian Release" does not have a Release file. It cannot be updated from a repository like this safely and is therefore disabled by default. See the apt-secure man page ( for details on creating repositories and configuring users. The “http://buildbot.linuxcnc.org bookworm Release” repository does not have a Release file.

I think that I get this message as well but I also think that it still does work.

Try apt search linuxcnc after sudo apt update and see if the last built package from here is shown.
buildbot2.highlab.com/debian/dists/bookw...inary-amd64/?C=M;O=D

it is currently 2.10.0~pre0.3694.g620332fdf4