cam_align

Chris, a little something here, regarding the variation of the circle diameter

mouse scroll only - scroll circle diameter 

may now work a little slower than in previous versions

It would perhaps be practical if the currently set value according to the

middle mouse single click - cycle through rotation increments 

would also be used to adjust the diameter?

 

Here is a version that use a sequence to change the diameter increment.
hold left button double click right button  increment + .5
hold right button double click left button  increment - .5

See if you like that. If not, yes we could just use the rotation increment for the diameter increment too.

This file must be named 'camview_widget.py' and replace the original file.

Are you building a custom control panel there?

 


unfortunately it doesn't work with this file at the moment? 

  File "/usr/lib/python3/dist-packages/qtvcp/widgets/camview_widget.py", line 80, in __init__
    self.SUB = str.maketrans("0123456789", "₀₁₂₃₄₅₆₇₈₉")
               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ValueError: the first two maketrans arguments must have equal length


both variants would be practical, but for me it would be even better to use the set rotation angles
 

This zipped file should work:

but sure, it works exactly as described, thank you very much for now, I'll be happy to test all sorts of things further

I would like to thank you again for your help

it's a bit of acrobatics with the computer mouse,

after several attempts, it seems to me that it would be much better with a single, shared multiplier for crosshair angle or also for circle diameter

Ok here's the single increments version.

 

you great magician, this version is now installed here and tried out, I think this is really the ideal variant, thank you very much