Profile for axk

Offline

User Type: User
Rank: New Member

Register Date: 26 Oct 2015
Last login: 7 years 6 months ago
Time Zone: UTC +0:00
Local Time: 13:58

Posts: 16
Profile views: 6

Gender: Unknown
Birthdate: Unknown

axk's recent posts (16 messages )

	Subject	Replies / Views	Last Post

	closed loop using linear scales vs rotary encoders Category: General LinuxCNC Questions Topic started 10 years 11 months ago, by axk Last Post 10 years 11 months ago by axk 1 2	Replies:10 Views:13.3k	Last Post by axk 10 years 11 months ago
	closed loop using linear scales vs rotary encoders Category: General LinuxCNC Questions Topic started 10 years 11 months ago, by axk Last Post 10 years 11 months ago by axk 1 2	Replies:10 Views:13.3k	Last Post by axk 10 years 11 months ago
	closed loop using linear scales vs rotary encoders Category: General LinuxCNC Questions Topic started 10 years 11 months ago, by axk Last Post 10 years 11 months ago by axk 1 2	Replies:10 Views:13.3k	Last Post by axk 10 years 11 months ago
	closed loop using linear scales vs rotary encoders Category: General LinuxCNC Questions Topic started 10 years 11 months ago, by axk Last Post 10 years 11 months ago by axk 1 2	Replies:10 Views:13.3k	Last Post by axk 10 years 11 months ago
	closed loop using linear scales vs rotary encoders Category: General LinuxCNC Questions Topic started 10 years 11 months ago, by axk Last Post 10 years 11 months ago by axk 1 2	Replies:10 Views:13.3k	Last Post by axk 10 years 11 months ago
	closed loop using linear scales vs rotary encoders Category: General LinuxCNC Questions Topic started 10 years 11 months ago, by axk Last Post 10 years 11 months ago by axk 1 2	Replies:10 Views:13.3k	Last Post by axk 10 years 11 months ago
	LinuxCNC with Realtime Ethernet controller Category: Driver Boards Topic started 10 years 11 months ago, by shengyifine Last Post 10 years 11 months ago by tommylight 1 2	Replies:10 Views:12.7k	Last Post by tommylight 10 years 11 months ago
	transitioning from smoothstepper to mesa? Category: Driver Boards Topic started 11 years 4 days ago, by axk Last Post 10 years 11 months ago by andypugh 1 2	Replies:19 Views:14.1k	Last Post by andypugh 10 years 11 months ago
	transitioning from smoothstepper to mesa? Category: Driver Boards Topic started 11 years 4 days ago, by axk Last Post 10 years 11 months ago by andypugh 1 2	Replies:19 Views:14.1k	Last Post by andypugh 10 years 11 months ago
	transitioning from smoothstepper to mesa? Category: Driver Boards Topic started 11 years 4 days ago, by axk Last Post 10 years 11 months ago by andypugh 1 2	Replies:19 Views:14.1k	Last Post by andypugh 10 years 11 months ago

Time to create page: 0.092 seconds

Powered by Kunena Forum