Profile for jferguson

Offline

User Type: User
Rank: Junior Member

Register Date: 14 Aug 2016
Last login: 3 years 8 months ago
Time Zone: UTC -4:00
Local Time: 16:35

Posts: 37
Profile views: 5

Gender: Unknown
Birthdate: Unknown

jferguson's recent posts (37 messages )

	Subject	Replies / Views	Last Post

	Change default set-up home from 0,0,1 to 0,0,0.25 Category: General LinuxCNC Questions Topic started 3 years 8 months ago, by jferguson Last Post 3 years 8 months ago by rodw	Replies:8 Views:1128	Last Post by rodw 3 years 8 months ago
	Change default set-up home from 0,0,1 to 0,0,0.25 Category: General LinuxCNC Questions Topic started 3 years 8 months ago, by jferguson Last Post 3 years 8 months ago by rodw	Replies:8 Views:1128	Last Post by rodw 3 years 8 months ago
	Change default set-up home from 0,0,1 to 0,0,0.25 Category: General LinuxCNC Questions Topic started 3 years 8 months ago, by jferguson Last Post 3 years 8 months ago by rodw	Replies:8 Views:1128	Last Post by rodw 3 years 8 months ago
	Change default set-up home from 0,0,1 to 0,0,0.25 Category: General LinuxCNC Questions Topic started 3 years 8 months ago, by jferguson Last Post 3 years 8 months ago by rodw	Replies:8 Views:1128	Last Post by rodw 3 years 8 months ago
	Change default set-up home from 0,0,1 to 0,0,0.25 Category: General LinuxCNC Questions Topic started 3 years 8 months ago, by jferguson Last Post 3 years 8 months ago by rodw	Replies:8 Views:1128	Last Post by rodw 3 years 8 months ago
	Running Ubuntu 10.04 LinuxCNC in virtual machine Category: Installing LinuxCNC Topic started 3 years 8 months ago, by jferguson Last Post 3 years 8 months ago by jferguson	Replies:7 Views:2505	Last Post by jferguson 3 years 8 months ago
	Running Ubuntu 10.04 LinuxCNC in virtual machine Category: Installing LinuxCNC Topic started 3 years 8 months ago, by jferguson Last Post 3 years 8 months ago by jferguson	Replies:7 Views:2505	Last Post by jferguson 3 years 8 months ago
	Running Ubuntu 10.04 LinuxCNC in virtual machine Category: Installing LinuxCNC Topic started 3 years 8 months ago, by jferguson Last Post 3 years 8 months ago by jferguson	Replies:7 Views:2505	Last Post by jferguson 3 years 8 months ago
	Running Ubuntu 10.04 LinuxCNC in virtual machine Category: Installing LinuxCNC Topic started 3 years 8 months ago, by jferguson Last Post 3 years 8 months ago by jferguson	Replies:7 Views:2505	Last Post by jferguson 3 years 8 months ago
	Running Ubuntu 10.04 LinuxCNC in virtual machine Category: Installing LinuxCNC Topic started 3 years 8 months ago, by jferguson Last Post 3 years 8 months ago by jferguson	Replies:7 Views:2505	Last Post by jferguson 3 years 8 months ago

Time to create page: 0.096 seconds

Powered by Kunena Forum