Profile for neil52

Offline
  • User Type: User
  • Rank: New Member New Member
  • Register Date: 07 Dec 2016
  • Last login: 1 year 9 months ago
  • Time Zone: UTC +0:00
  • Local Time: 20:31
  • Posts: 17
  • Profile views: 2
  • Gender: Unknown
  • Birthdate: Unknown


neil52's recent posts (17 messages )

Subject Replies / Views Last Post
Category: General LinuxCNC Questions
Topic started 1 year 11 months ago, by neil52
Last Post 1 year 11 months ago
by tommylight
Replies:3
Views:1066
Last Post by tommylight
1 year 11 months ago
Category: General LinuxCNC Questions
Topic started 1 year 11 months ago, by neil52
Last Post 1 year 11 months ago
by tommylight
Replies:3
Views:1066
Last Post by tommylight
1 year 11 months ago
Category: General LinuxCNC Questions
Topic started 5 years 2 months ago, by neil52
Last Post 5 years 2 months ago
by andypugh
Replies:6
Views:1071
Last Post by andypugh
5 years 2 months ago
Category: General LinuxCNC Questions
Topic started 5 years 2 months ago, by neil52
Last Post 5 years 2 months ago
by andypugh
Replies:6
Views:1071
Last Post by andypugh
5 years 2 months ago
Category: General LinuxCNC Questions
Topic started 6 years 5 months ago, by neil52
Last Post 6 years 5 months ago
by neil52
Replies:2
Views:1070
Last Post by neil52
6 years 5 months ago
Category: General LinuxCNC Questions
Topic started 6 years 5 months ago, by neil52
Last Post 6 years 5 months ago
by neil52
Replies:2
Views:1070
Last Post by neil52
6 years 5 months ago
Category: General LinuxCNC Questions
Topic started 8 years 7 months ago, by neil52
Last Post 8 years 7 months ago
by neil52
Replies:2
Views:1945
Last Post by neil52
8 years 7 months ago
Category: General LinuxCNC Questions
Topic started 8 years 7 months ago, by neil52
Last Post 8 years 7 months ago
by neil52
Replies:2
Views:1945
Last Post by neil52
8 years 7 months ago
Category: General LinuxCNC Questions
Topic started 9 years 6 months ago, by neil52
Last Post 7 years 3 months ago
by andypugh
Replies:4
Views:3752
Last Post by andypugh
7 years 3 months ago
Category: General LinuxCNC Questions
Topic started 9 years 6 months ago, by neil52
Last Post 7 years 3 months ago
by andypugh
Replies:4
Views:3752
Last Post by andypugh
7 years 3 months ago
Time to create page: 0.157 seconds
Powered by Kunena Forum