Profile for geertd

Offline

User Type: User
Rank: Junior Member

Register Date: 09 Apr 2018
Last login: 2 years 8 months ago
Time Zone: UTC +0:00
Local Time: 13:30

Posts: 30
Profile views: 4

Gender: Unknown
Birthdate: Unknown

geertd's recent posts (30 messages )

	Subject	Replies / Views	Last Post

	Changing from Parallel port to Mesa 7i96s Category: General LinuxCNC Questions Topic started 2 years 8 months ago, by geertd Last Post 2 years 8 months ago by tommylight	Replies:1 Views:801	Last Post by tommylight 2 years 8 months ago
	scaling problem on CNC Router Category: Advanced Configuration Topic started 3 years 2 months ago, by geertd Last Post 3 years 2 months ago by andypugh	Replies:1 Views:1163	Last Post by andypugh 3 years 2 months ago
	Converting a CNC Stepper router with a handheld DSP Controller (Richauto A11) Category: CNC Machines Topic started 8 years 2 weeks ago, by geertd Last Post 3 years 9 months ago by geertd	Replies:6 Views:6259	Last Post by geertd 3 years 9 months ago
	Converting CNC Stepper router with handheld DSP Controller (Richauto A11) PART2 Category: CNC Machines Topic started 7 years 9 months ago, by geertd Last Post 3 years 11 months ago by beau 1 2	Replies:16 Views:6724	Last Post by beau 3 years 11 months ago
	Campy / camview on gmoccapy problem Category: General LinuxCNC Questions Topic started 6 years 5 months ago, by geertd Last Post 6 years 5 months ago by geertd	Replies:2 Views:1117	Last Post by geertd 6 years 5 months ago
	Campy / camview on gmoccapy problem Category: General LinuxCNC Questions Topic started 6 years 5 months ago, by geertd Last Post 6 years 5 months ago by geertd	Replies:2 Views:1117	Last Post by geertd 6 years 5 months ago
	gladeVCP Hal widgets: how to connect hal pins ? Category: GladeVCP Topic started 6 years 7 months ago, by geertd Last Post 6 years 7 months ago by geertd	Replies:8 Views:3078	Last Post by geertd 6 years 7 months ago
	gladeVCP Hal widgets: how to connect hal pins ? Category: GladeVCP Topic started 6 years 7 months ago, by geertd Last Post 6 years 7 months ago by geertd	Replies:8 Views:3078	Last Post by geertd 6 years 7 months ago
	native cam installed, preview working, but gcode not running Category: NativeCAM Topic started 7 years 4 months ago, by geertd Last Post 7 years 4 months ago by geertd	Replies:4 Views:2663	Last Post by geertd 7 years 4 months ago
	native cam installed, preview working, but gcode not running Category: NativeCAM Topic started 7 years 4 months ago, by geertd Last Post 7 years 4 months ago by geertd	Replies:4 Views:2663	Last Post by geertd 7 years 4 months ago

Time to create page: 0.149 seconds

Powered by Kunena Forum