Profile for felixcnc

Offline

User Type: User
Rank: Junior Member

Register Date: 13 May 2019
Last login: 6 years 3 months ago
Time Zone: UTC +0:00
Local Time: 14:38

Posts: 29
Profile views: 5

Gender: Unknown
Birthdate: Unknown

felixcnc's recent posts (29 messages )

	Subject	Replies / Views	Last Post

	Using it 100% from the console Category: General LinuxCNC Questions Topic started 6 years 3 months ago, by felixcnc Last Post 6 years 3 months ago by rodw	Replies:1 Views:946	Last Post by rodw 6 years 3 months ago
	genserkins.c / gensrkins.h - and question about JOINTS Category: General LinuxCNC Questions Topic started 6 years 7 months ago, by felixcnc Last Post 6 years 7 months ago by andypugh	Replies:3 Views:1316	Last Post by andypugh 6 years 7 months ago
	genserkins.c / gensrkins.h - and question about JOINTS Category: General LinuxCNC Questions Topic started 6 years 7 months ago, by felixcnc Last Post 6 years 7 months ago by andypugh	Replies:3 Views:1316	Last Post by andypugh 6 years 7 months ago
	Puma560 - Geometry and building other 6 axis robots Category: General LinuxCNC Questions Topic started 6 years 7 months ago, by felixcnc Last Post 6 years 6 months ago by dgarrett 1 2	Replies:13 Views:5336	Last Post by dgarrett 6 years 6 months ago
	Puma560 - Geometry and building other 6 axis robots Category: General LinuxCNC Questions Topic started 6 years 7 months ago, by felixcnc Last Post 6 years 6 months ago by dgarrett 1 2	Replies:13 Views:5336	Last Post by dgarrett 6 years 6 months ago
	stepgen and joints Category: General LinuxCNC Questions Topic started 7 years 2 weeks ago, by felixcnc Last Post 7 years 1 week ago by felixcnc	Replies:3 Views:1398	Last Post by felixcnc 7 years 1 week ago
	stepgen and joints Category: General LinuxCNC Questions Topic started 7 years 2 weeks ago, by felixcnc Last Post 7 years 1 week ago by felixcnc	Replies:3 Views:1398	Last Post by felixcnc 7 years 1 week ago
	PUMA geometry Category: General LinuxCNC Questions Topic started 7 years 3 months ago, by felixcnc Last Post 7 years 4 weeks ago by pl7i92 1 2 3	Replies:20 Views:6093	Last Post by pl7i92 7 years 4 weeks ago
	PUMA geometry Category: General LinuxCNC Questions Topic started 7 years 3 months ago, by felixcnc Last Post 7 years 4 weeks ago by pl7i92 1 2 3	Replies:20 Views:6093	Last Post by pl7i92 7 years 4 weeks ago
	PUMA geometry Category: General LinuxCNC Questions Topic started 7 years 3 months ago, by felixcnc Last Post 7 years 4 weeks ago by pl7i92 1 2 3	Replies:20 Views:6093	Last Post by pl7i92 7 years 4 weeks ago

Time to create page: 0.102 seconds

Powered by Kunena Forum