Profile for jay.perez1

Offline

User Type: User
Rank: Senior Member

Register Date: 30 Oct 2019
Last login: 2 years 10 months ago
Time Zone: UTC +0:00
Local Time: 14:06

Posts: 44
Profile views: 7

Gender: Unknown
Birthdate: Unknown

jay.perez1's recent posts (44 messages )

	Subject	Replies / Views	Last Post

	Py3 - Probe Basic Config Conversion Doc Lcnc 2.9+ Category: QtPyVCP Topic started 3 years 7 months ago, by Lcvette Last Post 2 years 2 months ago by Lcvette 1 2 3 ... 7	Replies:60 Views:28.9k	Last Post by Lcvette 2 years 2 months ago
	Installing LinuxCNC 2.9 on Raspberry Pi 4B with Preempt-RT kernel Category: Installing LinuxCNC Topic started 3 years 10 months ago, by alangibson Last Post 1 year 11 months ago by behai 1 2 3 4	Replies:32 Views:29.6k	Last Post by behai 1 year 11 months ago
	Probing in Probe_Basic - Questions and Observations Category: QtPyVCP Topic started 3 years 9 months ago, by jay.perez1 Last Post 3 years 9 months ago by Lcvette	Replies:2 Views:2131	Last Post by Lcvette 3 years 9 months ago
	Probe working wrong way in Probe Basic Category: QtPyVCP Topic started 4 years 11 months ago, by icy Last Post 3 years 9 months ago by Lcvette	Replies:5 Views:2013	Last Post by Lcvette 3 years 9 months ago
	Probe Basic probing without Z-Axis? Category: QtPyVCP Topic started 4 years 6 months ago, by figure_of_disguise Last Post 2 years 6 months ago by figure_of_disguise 1 2	Replies:19 Views:6599	Last Post by figure_of_disguise 2 years 6 months ago
	Adding a tool height probe check? Category: General LinuxCNC Questions Topic started 4 years 2 days ago, by dannym Last Post 3 years 10 months ago by jay.perez1	Replies:5 Views:1957	Last Post by jay.perez1 3 years 10 months ago
	Prefered hardware for LCNC Category: Computers and Hardware Topic started 4 years 1 month ago, by Temo Last Post 3 years 10 months ago by jay.perez1	Replies:8 Views:2477	Last Post by jay.perez1 3 years 10 months ago
	LinuxCNC on RPI4b 8GB with P-LCNC Adapter and parallel BOB Category: General LinuxCNC Questions Topic started 4 years 1 month ago, by geostein8888 Last Post 3 years 10 months ago by andypugh 1 2	Replies:13 Views:2652	Last Post by andypugh 3 years 10 months ago
	LinuxCNC on RPI4b 8GB with P-LCNC Adapter and parallel BOB Category: General LinuxCNC Questions Topic started 4 years 1 month ago, by geostein8888 Last Post 3 years 10 months ago by andypugh 1 2	Replies:13 Views:2652	Last Post by andypugh 3 years 10 months ago
	LinuxCNC on RPI4b 8GB with P-LCNC Adapter and parallel BOB Category: General LinuxCNC Questions Topic started 4 years 1 month ago, by geostein8888 Last Post 3 years 10 months ago by andypugh 1 2	Replies:13 Views:2652	Last Post by andypugh 3 years 10 months ago

Time to create page: 0.105 seconds

Powered by Kunena Forum