Profile for Birdman3131

Offline
  • User Type: User
  • Rank: Senior Member Senior Member
  • Register Date: 12 Mar 2020
  • Last login: 3 years 1 month ago
  • Time Zone: UTC +0:00
  • Local Time: 13:41
  • Posts: 49
  • Profile views: 5
  • Gender: Unknown
  • Birthdate: Unknown


Birdman3131's recent posts (49 messages )

Subject Replies / Views Last Post
Category: Basic Configuration
Topic started 4 years 2 months ago, by Bumbino
Last Post 4 years 2 months ago
by tommylight
Replies:17
Views:4005
Last Post by tommylight
4 years 2 months ago
Category: CNC Machines
Topic started 4 years 3 months ago, by Birdman3131
Last Post 4 years 2 months ago
by Birdman3131
Replies:6
Views:1883
Last Post by Birdman3131
4 years 2 months ago
Category: CNC Machines
Topic started 4 years 3 months ago, by Birdman3131
Last Post 4 years 2 months ago
by Birdman3131
Replies:6
Views:1883
Last Post by Birdman3131
4 years 2 months ago
Category: CNC Machines
Topic started 4 years 3 months ago, by Birdman3131
Last Post 4 years 2 months ago
by Birdman3131
Replies:6
Views:1883
Last Post by Birdman3131
4 years 2 months ago
Category: CNC Machines
Topic started 4 years 3 months ago, by Birdman3131
Last Post 4 years 2 months ago
by Birdman3131
Replies:6
Views:1883
Last Post by Birdman3131
4 years 2 months ago
Category: CNC Machines
Topic started 4 years 3 months ago, by Birdman3131
Last Post 4 years 2 months ago
by Birdman3131
Replies:6
Views:1883
Last Post by Birdman3131
4 years 2 months ago
Category: General LinuxCNC Questions
Topic started 4 years 3 months ago, by Birdman3131
Last Post 4 years 3 months ago
by andypugh
Replies:18
Views:4432
Last Post by andypugh
4 years 3 months ago
Category: General LinuxCNC Questions
Topic started 4 years 3 months ago, by Birdman3131
Last Post 4 years 3 months ago
by andypugh
Replies:18
Views:4432
Last Post by andypugh
4 years 3 months ago
Category: General LinuxCNC Questions
Topic started 4 years 3 months ago, by Birdman3131
Last Post 4 years 3 months ago
by andypugh
Replies:18
Views:4432
Last Post by andypugh
4 years 3 months ago
Category: General LinuxCNC Questions
Topic started 4 years 3 months ago, by Birdman3131
Last Post 4 years 3 months ago
by andypugh
Replies:18
Views:4432
Last Post by andypugh
4 years 3 months ago
Time to create page: 1.891 seconds
Powered by Kunena Forum