Profile for nickom44

Offline

User Type: User
Rank: New Member

Register Date: 13 May 2020
Last login: 3 years 7 months ago
Time Zone: UTC +0:00
Local Time: 13:29

Posts: 19
Profile views: 6

Gender: Unknown
Birthdate: Unknown

nickom44's recent posts (19 messages )

	Subject	Replies / Views	Last Post

	isolcpus=1,2,3 does not isolate on Raspberry Pi 4Bx4Gb 5.15.65-rt49/2.9 32bit Category: Computers and Hardware Topic started 3 years 8 months ago, by DrKnow65 Last Post 3 years 7 months ago by rmu 1 2	Replies:10 Views:5704	Last Post by rmu 3 years 7 months ago
	Installing LinuxCNC 2.9 on Raspberry Pi 4B with Preempt-RT kernel Category: Installing LinuxCNC Topic started 3 years 10 months ago, by alangibson Last Post 1 year 11 months ago by behai 1 2 3 4	Replies:32 Views:29.6k	Last Post by behai 1 year 11 months ago
	isolcpus=1,2,3 does not isolate on Raspberry Pi 4Bx4Gb 5.15.65-rt49/2.9 32bit Category: Computers and Hardware Topic started 3 years 8 months ago, by DrKnow65 Last Post 3 years 7 months ago by rmu 1 2	Replies:10 Views:5704	Last Post by rmu 3 years 7 months ago
	Installing LinuxCNC 2.9 on Raspberry Pi 4B with Preempt-RT kernel Category: Installing LinuxCNC Topic started 3 years 10 months ago, by alangibson Last Post 1 year 11 months ago by behai 1 2 3 4	Replies:32 Views:29.6k	Last Post by behai 1 year 11 months ago
	Mesa card emulation in microcontroller Category: General LinuxCNC Questions Topic started 5 years 7 months ago, by nickom44 Last Post 5 years 7 months ago by kwarup 1 2	Replies:16 Views:6015	Last Post by kwarup 5 years 7 months ago
	Closed loop servo control with custom driver board Category: Driver Boards Topic started 5 years 8 months ago, by HerrNamenlos123 Last Post 5 years 7 months ago by andypugh 1 2	Replies:17 Views:6265	Last Post by andypugh 5 years 7 months ago
	Mesa card emulation in microcontroller Category: General LinuxCNC Questions Topic started 5 years 7 months ago, by nickom44 Last Post 5 years 7 months ago by kwarup 1 2	Replies:16 Views:6015	Last Post by kwarup 5 years 7 months ago
	Mesa card emulation in microcontroller Category: General LinuxCNC Questions Topic started 5 years 7 months ago, by nickom44 Last Post 5 years 7 months ago by kwarup 1 2	Replies:16 Views:6015	Last Post by kwarup 5 years 7 months ago
	Mesa card emulation in microcontroller Category: General LinuxCNC Questions Topic started 5 years 7 months ago, by nickom44 Last Post 5 years 7 months ago by kwarup 1 2	Replies:16 Views:6015	Last Post by kwarup 5 years 7 months ago
	Mesa card emulation in microcontroller Category: General LinuxCNC Questions Topic started 5 years 7 months ago, by nickom44 Last Post 5 years 7 months ago by kwarup 1 2	Replies:16 Views:6015	Last Post by kwarup 5 years 7 months ago

Time to create page: 0.104 seconds

Powered by Kunena Forum