Profile for yaqwsx

Offline

User Type: User
Rank: Junior Member

Register Date: 04 Sep 2011
Last login: 1 year 4 months ago
Time Zone: UTC +0:00
Local Time: 13:11

Posts: 21
Profile views: 2

Gender: Unknown
Birthdate: Unknown

yaqwsx's recent posts (21 messages )

	Subject	Replies / Views	Last Post

	Lathe - tool offset in Y does not work Category: General LinuxCNC Questions Topic started 6 years 6 months ago, by yaqwsx Last Post 6 years 6 months ago by yaqwsx	Replies:9 Views:1851	Last Post by yaqwsx 6 years 6 months ago
	Lathe - tool offset in Y does not work Category: General LinuxCNC Questions Topic started 6 years 6 months ago, by yaqwsx Last Post 6 years 6 months ago by yaqwsx	Replies:9 Views:1851	Last Post by yaqwsx 6 years 6 months ago
	Lathe - tool offset in Y does not work Category: General LinuxCNC Questions Topic started 6 years 6 months ago, by yaqwsx Last Post 6 years 6 months ago by yaqwsx	Replies:9 Views:1851	Last Post by yaqwsx 6 years 6 months ago
	Lathe - tool offset in Y does not work Category: General LinuxCNC Questions Topic started 6 years 6 months ago, by yaqwsx Last Post 6 years 6 months ago by yaqwsx	Replies:9 Views:1851	Last Post by yaqwsx 6 years 6 months ago
	Canot set pin as output Category: PnCConf Wizard Topic started 9 years 10 months ago, by yaqwsx Last Post 9 years 10 months ago by PCW 1 2	Replies:12 Views:4869	Last Post by PCW 9 years 10 months ago
	Canot set pin as output Category: PnCConf Wizard Topic started 9 years 10 months ago, by yaqwsx Last Post 9 years 10 months ago by PCW 1 2	Replies:12 Views:4869	Last Post by PCW 9 years 10 months ago
	Canot set pin as output Category: PnCConf Wizard Topic started 9 years 10 months ago, by yaqwsx Last Post 9 years 10 months ago by PCW 1 2	Replies:12 Views:4869	Last Post by PCW 9 years 10 months ago
	Canot set pin as output Category: PnCConf Wizard Topic started 9 years 10 months ago, by yaqwsx Last Post 9 years 10 months ago by PCW 1 2	Replies:12 Views:4869	Last Post by PCW 9 years 10 months ago
	Canot set pin as output Category: PnCConf Wizard Topic started 9 years 10 months ago, by yaqwsx Last Post 9 years 10 months ago by PCW 1 2	Replies:12 Views:4869	Last Post by PCW 9 years 10 months ago
	Canot set pin as output Category: PnCConf Wizard Topic started 9 years 10 months ago, by yaqwsx Last Post 9 years 10 months ago by PCW 1 2	Replies:12 Views:4869	Last Post by PCW 9 years 10 months ago

Time to create page: 1.360 seconds

Powered by Kunena Forum