Profile for liutas4x4

Offline

User Type: User
Rank: New Member

Register Date: 13 Jan 2025
Last login: 4 months 2 weeks ago
Time Zone: UTC +0:00
Local Time: 12:45

Posts: 19
Profile views: 10

Gender: Unknown
Birthdate: Unknown

liutas4x4's recent posts (19 messages )

	Subject	Replies / Views	Last Post

	Rufus found problem with linuxcnc_2.9.8-amd64.hybrid.iso -- missing files Category: General LinuxCNC Questions Topic started 7 months 2 weeks ago, by liutas4x4 Last Post 7 months 6 days ago by liutas4x4	Replies:7 Views:784	Last Post by liutas4x4 7 months 6 days ago
	Rufus found problem with linuxcnc_2.9.8-amd64.hybrid.iso -- missing files Category: General LinuxCNC Questions Topic started 7 months 2 weeks ago, by liutas4x4 Last Post 7 months 6 days ago by liutas4x4	Replies:7 Views:784	Last Post by liutas4x4 7 months 6 days ago
	Is it possible to write comments at .ini at the same row? Category: General LinuxCNC Questions Topic started 7 months 2 weeks ago, by liutas4x4 Last Post 7 months 2 weeks ago by liutas4x4	Replies:2 Views:569	Last Post by liutas4x4 7 months 2 weeks ago
	Is it possible to write comments at .ini at the same row? Category: General LinuxCNC Questions Topic started 7 months 2 weeks ago, by liutas4x4 Last Post 7 months 2 weeks ago by liutas4x4	Replies:2 Views:569	Last Post by liutas4x4 7 months 2 weeks ago
	some qs about Axis tuning Category: General LinuxCNC Questions Topic started 7 months 2 weeks ago, by liutas4x4 Last Post 7 months 2 weeks ago by liutas4x4	Replies:3 Views:724	Last Post by liutas4x4 7 months 2 weeks ago
	some qs about Axis tuning Category: General LinuxCNC Questions Topic started 7 months 2 weeks ago, by liutas4x4 Last Post 7 months 2 weeks ago by liutas4x4	Replies:3 Views:724	Last Post by liutas4x4 7 months 2 weeks ago
	some qs about Axis tuning Category: General LinuxCNC Questions Topic started 7 months 2 weeks ago, by liutas4x4 Last Post 7 months 2 weeks ago by liutas4x4	Replies:3 Views:724	Last Post by liutas4x4 7 months 2 weeks ago
	M codes for a second spindle? Category: General LinuxCNC Questions Topic started 8 months 1 week ago, by liutas4x4 Last Post 8 months 5 days ago by tommylight	Replies:6 Views:849	Last Post by tommylight 8 months 5 days ago
	M codes for a second spindle? Category: General LinuxCNC Questions Topic started 8 months 1 week ago, by liutas4x4 Last Post 8 months 5 days ago by tommylight	Replies:6 Views:849	Last Post by tommylight 8 months 5 days ago
	M codes for a second spindle? Category: General LinuxCNC Questions Topic started 8 months 1 week ago, by liutas4x4 Last Post 8 months 5 days ago by tommylight	Replies:6 Views:849	Last Post by tommylight 8 months 5 days ago

Time to create page: 0.219 seconds

Powered by Kunena Forum