Profile for aaron

Offline

User Type: User
Rank: Premium Member

Register Date: 12 Apr 2009
Last login: 1 month 3 weeks ago
Time Zone: UTC +0:00
Local Time: 09:43

Posts: 98
Profile views: 14

Gender: Unknown
Birthdate: Unknown

aaron's recent posts (98 messages )

	Subject	Replies / Views	Last Post

	Latency problem after upgrading to Trixie Category: General LinuxCNC Questions Topic started 1 month 3 weeks ago, by aaron Last Post 1 month 3 weeks ago by rodw	Replies:8 Views:330	Last Post by rodw 1 month 3 weeks ago
	Update and upgrade debian bookworm. Category: General LinuxCNC Questions Topic started 2 months 3 weeks ago, by aaron Last Post 2 months 2 weeks ago by tommylight	Replies:4 Views:423	Last Post by tommylight 2 months 2 weeks ago
	Update and upgrade debian bookworm. Category: General LinuxCNC Questions Topic started 2 months 3 weeks ago, by aaron Last Post 2 months 2 weeks ago by tommylight	Replies:4 Views:423	Last Post by tommylight 2 months 2 weeks ago
	Parallel port access is not allowed Category: Installing LinuxCNC Topic started 3 months 3 weeks ago, by aaron Last Post 3 months 2 weeks ago by aaron	Replies:5 Views:1427	Last Post by aaron 3 months 2 weeks ago
	Getting Trixie to play nice Category: General LinuxCNC Questions Topic started 3 months 2 weeks ago, by aaron Last Post 3 months 2 weeks ago by tuxcnc	Replies:2 Views:535	Last Post by tuxcnc 3 months 2 weeks ago
	Trixy Install problems Category: General LinuxCNC Questions Topic started 3 months 3 weeks ago, by aaron Last Post 3 months 2 weeks ago by rodw	Replies:8 Views:906	Last Post by rodw 3 months 2 weeks ago
	Trixy Install problems Category: General LinuxCNC Questions Topic started 3 months 3 weeks ago, by aaron Last Post 3 months 2 weeks ago by rodw	Replies:8 Views:906	Last Post by rodw 3 months 2 weeks ago
	Trixy Install problems Category: General LinuxCNC Questions Topic started 3 months 3 weeks ago, by aaron Last Post 3 months 2 weeks ago by rodw	Replies:8 Views:906	Last Post by rodw 3 months 2 weeks ago
	Parallel port access is not allowed Category: Installing LinuxCNC Topic started 3 months 3 weeks ago, by aaron Last Post 3 months 2 weeks ago by aaron	Replies:5 Views:1427	Last Post by aaron 3 months 2 weeks ago
	Parallel port access is not allowed Category: Installing LinuxCNC Topic started 3 months 3 weeks ago, by aaron Last Post 3 months 2 weeks ago by aaron	Replies:5 Views:1427	Last Post by aaron 3 months 2 weeks ago

Time to create page: 0.339 seconds

Powered by Kunena Forum