cnc@MeBigCNC3:~/linuxcnc/configs/MeBigCNC3$ 
cnc@MeBigCNC3:~/linuxcnc/configs/MeBigCNC3$ linuxcnc
LINUXCNC - 2.8.0-pre1-3708-g8259e142e
pickconfig: installed aux examples: /usr/share/linuxcnc/aux_examples/NativeCAM
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {invokeStk1 treeclose /usr/share/linuxcnc/aux_examp..."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {ScrolledWindow::_set_hscroll .main.f1.f2.f3 0.0 1...."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {ScrolledWindow::_set_vscroll .main.f1.f2.f3 0.0 1...."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {ScrolledWindow::_set_vscroll .main.f1.f2.f4 0.0 1...."
error in background error handler:
too many nested evaluations (infinite loop?)
    while executing
"::tcl::Bgerror {too many nested evaluations (infinite loop?)} {-code 1 -level 0 -errorstack {INNER {ScrolledWindow::_set_hscroll .main.f1.f2.f4 0.0 1...."
too many nested evaluations (infinite loop?)
    while executing
"eval [linsert $args 0 ::Tree::$cmd .main.f1.f2.f3.tree]"
    (procedure ".main.f1.f2.f3.tree" line 1)
    invoked from within
"$::tree visible $::selected_node"
    (procedure "treeclose" line 3)
    invoked from within
"treeclose /usr/share/linuxcnc/aux_examples/NativeCAM/2.8/axis/mill-mm.ini"
    ("after" script)
too many nested evaluations (infinite loop?)
    while executing
"_node_name $path $node"
    (procedure "::Tree::visible" line 2)
    invoked from within
"::Tree::visible .main.f1.f2.f3.tree /home/cnc/linuxcnc/configs/MeBigCNC3/MeBigCNC3.ini"
    ("eval" body line 1)
    invoked from within
"eval [linsert $args 0 ::Tree::$cmd .main.f1.f2.f3.tree]"
    (procedure ".main.f1.f2.f3.tree" line 1)
    invoked from within
"$::tree visible $::selected_node"
    (procedure "treeclose" line 3)
    invoked from within
"treeclose /usr/share/linuxcnc/aux_examples/NativeCAM/2.8/axis/lathe.ini"
    ("after" script)
Machine configuration directory is '/home/cnc/linuxcnc/configs/MeBigCNC3'
Machine configuration file is 'MeBigCNC3.ini'
Starting LinuxCNC...
twopass:invoked with <verbose nodelete> options
twopass: pass0:BEGIN
twopass:found ./main.hal
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: loadrt [KINS]KINEMATICS
twopass:    tcl: loadrt $::KINS(KINEMATICS) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: loadrt [EMCMOT]EMCMOT servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[KINS]JOINTS 
twopass:    tcl: loadrt $::EMCMOT(EMCMOT) servo_period_nsec=$::EMCMOT(SERVO_PERIOD) num_joints=$::KINS(JOINTS) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.00.dirsetup        [JOINT_0]DIRSETUP
twopass:    tcl: setp   hm2_7i76e.0.stepgen.00.dirsetup        $::JOINT_0(DIRSETUP) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.00.dirhold         [JOINT_0]DIRHOLD
twopass:    tcl: setp   hm2_7i76e.0.stepgen.00.dirhold         $::JOINT_0(DIRHOLD) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.00.steplen         [JOINT_0]STEPLEN
twopass:    tcl: setp   hm2_7i76e.0.stepgen.00.steplen         $::JOINT_0(STEPLEN) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.00.stepspace       [JOINT_0]STEPSPACE
twopass:    tcl: setp   hm2_7i76e.0.stepgen.00.stepspace       $::JOINT_0(STEPSPACE) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.00.position-scale  [JOINT_0]STEP_SCALE
twopass:    tcl: setp   hm2_7i76e.0.stepgen.00.position-scale  $::JOINT_0(STEP_SCALE) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.00.maxaccel         [JOINT_0]STEPGEN_MAXACCEL
twopass:    tcl: setp   hm2_7i76e.0.stepgen.00.maxaccel         $::JOINT_0(STEPGEN_MAXACCEL) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.00.maxvel           [JOINT_0]STEPGEN_MAXVEL
twopass:    tcl: setp   hm2_7i76e.0.stepgen.00.maxvel           $::JOINT_0(STEPGEN_MAXVEL) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.01.dirsetup        [JOINT_1]DIRSETUP
twopass:    tcl: setp   hm2_7i76e.0.stepgen.01.dirsetup        $::JOINT_1(DIRSETUP) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.01.dirhold         [JOINT_1]DIRHOLD
twopass:    tcl: setp   hm2_7i76e.0.stepgen.01.dirhold         $::JOINT_1(DIRHOLD) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.01.steplen         [JOINT_1]STEPLEN
twopass:    tcl: setp   hm2_7i76e.0.stepgen.01.steplen         $::JOINT_1(STEPLEN) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.01.stepspace       [JOINT_1]STEPSPACE
twopass:    tcl: setp   hm2_7i76e.0.stepgen.01.stepspace       $::JOINT_1(STEPSPACE) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.01.position-scale  [JOINT_1]STEP_SCALE
twopass:    tcl: setp   hm2_7i76e.0.stepgen.01.position-scale  $::JOINT_1(STEP_SCALE) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.01.maxaccel         [JOINT_1]STEPGEN_MAXACCEL
twopass:    tcl: setp   hm2_7i76e.0.stepgen.01.maxaccel         $::JOINT_1(STEPGEN_MAXACCEL) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.01.maxvel           [JOINT_1]STEPGEN_MAXVEL
twopass:    tcl: setp   hm2_7i76e.0.stepgen.01.maxvel           $::JOINT_1(STEPGEN_MAXVEL) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.02.dirsetup        [JOINT_2]DIRSETUP
twopass:    tcl: setp   hm2_7i76e.0.stepgen.02.dirsetup        $::JOINT_2(DIRSETUP) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.02.dirhold         [JOINT_2]DIRHOLD
twopass:    tcl: setp   hm2_7i76e.0.stepgen.02.dirhold         $::JOINT_2(DIRHOLD) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.02.steplen         [JOINT_2]STEPLEN
twopass:    tcl: setp   hm2_7i76e.0.stepgen.02.steplen         $::JOINT_2(STEPLEN) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.02.stepspace       [JOINT_2]STEPSPACE
twopass:    tcl: setp   hm2_7i76e.0.stepgen.02.stepspace       $::JOINT_2(STEPSPACE) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.02.position-scale  [JOINT_2]STEP_SCALE
twopass:    tcl: setp   hm2_7i76e.0.stepgen.02.position-scale  $::JOINT_2(STEP_SCALE) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.02.maxaccel         [JOINT_2]STEPGEN_MAXACCEL
twopass:    tcl: setp   hm2_7i76e.0.stepgen.02.maxaccel         $::JOINT_2(STEPGEN_MAXACCEL) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.02.maxvel           [JOINT_2]STEPGEN_MAXVEL
twopass:    tcl: setp   hm2_7i76e.0.stepgen.02.maxvel           $::JOINT_2(STEPGEN_MAXVEL) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.03.dirsetup        [JOINT_3]DIRSETUP
twopass:    tcl: setp   hm2_7i76e.0.stepgen.03.dirsetup        $::JOINT_3(DIRSETUP) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.03.dirhold         [JOINT_3]DIRHOLD
twopass:    tcl: setp   hm2_7i76e.0.stepgen.03.dirhold         $::JOINT_3(DIRHOLD) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.03.steplen         [JOINT_3]STEPLEN
twopass:    tcl: setp   hm2_7i76e.0.stepgen.03.steplen         $::JOINT_3(STEPLEN) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.03.stepspace       [JOINT_3]STEPSPACE
twopass:    tcl: setp   hm2_7i76e.0.stepgen.03.stepspace       $::JOINT_3(STEPSPACE) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.03.position-scale  [JOINT_3]STEP_SCALE
twopass:    tcl: setp   hm2_7i76e.0.stepgen.03.position-scale  $::JOINT_3(STEP_SCALE) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.03.maxaccel        [JOINT_3]STEPGEN_MAXACCEL
twopass:    tcl: setp   hm2_7i76e.0.stepgen.03.maxaccel        $::JOINT_3(STEPGEN_MAXACCEL) 
twopass: converted hal line for tcl from ./main.hal:
twopass:    hal: setp   hm2_7i76e.0.stepgen.03.maxvel          [JOINT_3]STEPGEN_MAXVEL
twopass:    tcl: setp   hm2_7i76e.0.stepgen.03.maxvel          $::JOINT_3(STEPGEN_MAXVEL) 
twopass: converted ./main.hal to /tmp/main.hal.tmp
twopass:found ./7i76e.hal
twopass: converted ./7i76e.hal to /tmp/7i76e.hal.tmp
twopass:found ./all_pre_postgui.hal
twopass: converted ./all_pre_postgui.hal to /tmp/all_pre_postgui.hal.tmp
twopass:found ./home_limit.hal
twopass: converted ./home_limit.hal to /tmp/home_limit.hal.tmp
twopass:found ./classicladder.hal
twopass: converted ./classicladder.hal to /tmp/classicladder.hal.tmp
twopass: sourcing: /tmp/main.hal.tmp
twopass: sourcing: /tmp/7i76e.hal.tmp
twopass: sourcing: /tmp/all_pre_postgui.hal.tmp
twopass: sourcing: /tmp/home_limit.hal.tmp
twopass: sourcing: /tmp/classicladder.hal.tmp
twopass: loadrt trivkins
Note: Using POSIX realtime
twopass: loadrt motmod servo_period_nsec=1000000 num_joints=4
twopass: loadrt hostmot2
hm2: loading Mesa HostMot2 driver version 0.15
twopass: loadrt hm2_eth [concat board_ip="192.168.1.121"] [concat config="num_encoders=1 num_pwmgens=0 num_stepgens=4 sserial_port_0=21xxxx"]
hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2
hm2_eth: 192.168.1.121: Hardware address: 00:60:1b:10:40:be
hm2_eth: discovered 7I76E-16
hm2/hm2_7i76e.0: Smart Serial Firmware Version 43
Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard
Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin
Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin
Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv
Board hm2_7i76e.0.7i73.0.1 Hardware Mode 0 = nokeyboardnodisplay
Board hm2_7i76e.0.7i73.0.1 Software Mode 0 = inputoutputencoder
Board hm2_7i76e.0.7i73.0.1 Software Mode 1 = inputoutputencoderanalog
Board hm2_7i76e.0.7i73.0.1 Software Mode 2 = inputoutputencoderanalog
Board hm2_7i76e.0.7i73.0.1 Hardware Mode 1 = nokeyboarddisplay
Board hm2_7i76e.0.7i73.0.1 Software Mode 0 = inputoutputencoderdisplay
Board hm2_7i76e.0.7i73.0.1 Software Mode 1 = inputoutputencoderanalogdisplay
Board hm2_7i76e.0.7i73.0.1 Software Mode 2 = inputoutputencoderanalogwidedisplay
Board hm2_7i76e.0.7i73.0.1 Hardware Mode 2 = keyboard4by8nodisplay
Board hm2_7i76e.0.7i73.0.1 Software Mode 0 = inputoutputencoderkeycode4by8
Board hm2_7i76e.0.7i73.0.1 Software Mode 1 = inputoutputencoderanalogkeycode4by8
Board hm2_7i76e.0.7i73.0.1 Software Mode 2 = inputoutputencoderanalogkeycode4by8
Board hm2_7i76e.0.7i73.0.1 Hardware Mode 3 = keyboard4by8display
Board hm2_7i76e.0.7i73.0.1 Software Mode 0 = inputoutputencoderdisplaykeycode4by8
Board hm2_7i76e.0.7i73.0.1 Software Mode 1 = inputoutputencoderanalogdisplaykeycode4by8
Board hm2_7i76e.0.7i73.0.1 Software Mode 2 = inputoutputencoderanalogwidedisplaykeycode4by8
Board hm2_7i76e.0.7i73.0.1 Hardware Mode 4 = keyboard8by8nodisplay
Board hm2_7i76e.0.7i73.0.1 Software Mode 0 = inputoutputencoderkeycode8by8
Board hm2_7i76e.0.7i73.0.1 Software Mode 1 = inputoutputencoderanalogkeycode8by8
Board hm2_7i76e.0.7i73.0.1 Software Mode 2 = inputoutputencoderanalogkeycode8by8
Board hm2_7i76e.0.7i73.0.1 Hardware Mode 5 = keyboard8by8display
Board hm2_7i76e.0.7i73.0.1 Software Mode 0 = inputoutputencoderdisplaykeycode8by8
Waiting for component 'hm2_eth' to become ready.Board hm2_7i76e.0.7i73.0.1 Software Mode 1 = inputoutputencoderanalogdisplaykeycode8by8
Board hm2_7i76e.0.7i73.0.1 Software Mode 2 = inputoutputencoderanalogwidedisplaykeycode8by8
........hm2/hm2_7i76e.0: 51 I/O Pins used:
hm2/hm2_7i76e.0:     IO Pin 000 (P1-01): StepGen #0, pin Direction (Output)
hm2/hm2_7i76e.0:     IO Pin 001 (P1-14): StepGen #0, pin Step (Output)
hm2/hm2_7i76e.0:     IO Pin 002 (P1-02): StepGen #1, pin Direction (Output)
hm2/hm2_7i76e.0:     IO Pin 003 (P1-15): StepGen #1, pin Step (Output)
hm2/hm2_7i76e.0:     IO Pin 004 (P1-03): StepGen #2, pin Direction (Output)
hm2/hm2_7i76e.0:     IO Pin 005 (P1-16): StepGen #2, pin Step (Output)
hm2/hm2_7i76e.0:     IO Pin 006 (P1-04): StepGen #3, pin Direction (Output)
hm2/hm2_7i76e.0:     IO Pin 007 (P1-17): StepGen #3, pin Step (Output)
hm2/hm2_7i76e.0:     IO Pin 008 (P1-05): IOPort
hm2/hm2_7i76e.0:     IO Pin 009 (P1-06): IOPort
hm2/hm2_7i76e.0:     IO Pin 010 (P1-07): Smart Serial Interface #0, pin TxData0 (Output)
hm2/hm2_7i76e.0:     IO Pin 011 (P1-08): Smart Serial Interface #0, pin RxData0 (Input)
hm2/hm2_7i76e.0:     IO Pin 012 (P1-09): Smart Serial Interface #0, pin TxData1 (Output)
hm2/hm2_7i76e.0:     IO Pin 013 (P1-10): Smart Serial Interface #0, pin RxData1 (Input)
hm2/hm2_7i76e.0:     IO Pin 014 (P1-11): Encoder #0, pin Index (Input)
hm2/hm2_7i76e.0:     IO Pin 015 (P1-12): Encoder #0, pin B (Input)
hm2/hm2_7i76e.0:     IO Pin 016 (P1-13): Encoder #0, pin A (Input)
hm2/hm2_7i76e.0:     IO Pin 017 (P2-01): IOPort
hm2/hm2_7i76e.0:     IO Pin 018 (P2-14): IOPort
hm2/hm2_7i76e.0:     IO Pin 019 (P2-02): IOPort
hm2/hm2_7i76e.0:     IO Pin 020 (P2-15): IOPort
hm2/hm2_7i76e.0:     IO Pin 021 (P2-03): IOPort
hm2/hm2_7i76e.0:     IO Pin 022 (P2-16): IOPort
hm2/hm2_7i76e.0:     IO Pin 023 (P2-04): IOPort
hm2/hm2_7i76e.0:     IO Pin 024 (P2-17): IOPort
hm2/hm2_7i76e.0:     IO Pin 025 (P2-05): IOPort
hm2/hm2_7i76e.0:     IO Pin 026 (P2-06): IOPort
hm2/hm2_7i76e.0:     IO Pin 027 (P2-07): IOPort
hm2/hm2_7i76e.0:     IO Pin 028 (P2-08): IOPort
hm2/hm2_7i76e.0:     IO Pin 029 (P2-09): IOPort
hm2/hm2_7i76e.0:     IO Pin 030 (P2-10): IOPort
hm2/hm2_7i76e.0:     IO Pin 031 (P2-11): IOPort
hm2/hm2_7i76e.0:     IO Pin 032 (P2-12): IOPort
hm2/hm2_7i76e.0:     IO Pin 033 (P2-13): IOPort
hm2/hm2_7i76e.0:     IO Pin 034 (P3-01): IOPort
hm2/hm2_7i76e.0:     IO Pin 035 (P3-14): IOPort
hm2/hm2_7i76e.0:     IO Pin 036 (P3-02): IOPort
hm2/hm2_7i76e.0:     IO Pin 037 (P3-15): IOPort
hm2/hm2_7i76e.0:     IO Pin 038 (P3-03): IOPort
hm2/hm2_7i76e.0:     IO Pin 039 (P3-16): IOPort
hm2/hm2_7i76e.0:     IO Pin 040 (P3-04): IOPort
hm2/hm2_7i76e.0:     IO Pin 041 (P3-17): IOPort
hm2/hm2_7i76e.0:     IO Pin 042 (P3-05): IOPort
hm2/hm2_7i76e.0:     IO Pin 043 (P3-06): IOPort
hm2/hm2_7i76e.0:     IO Pin 044 (P3-07): IOPort
hm2/hm2_7i76e.0:     IO Pin 045 (P3-08): IOPort
hm2/hm2_7i76e.0:     IO Pin 046 (P3-09): IOPort
hm2/hm2_7i76e.0:     IO Pin 047 (P3-10): IOPort
hm2/hm2_7i76e.0:     IO Pin 048 (P3-11): IOPort
hm2/hm2_7i76e.0:     IO Pin 049 (P3-12): IOPort
hm2/hm2_7i76e.0:     IO Pin 050 (P3-13): IOPort
hm2/hm2_7i76e.0: registered

twopass: loadrt scale names=scale-spindle-vel,scale-feed-vel,scale-rapid-vel
twopass: loadrt mux2 names=switch-feed,switch-rapid,spind-speed
twopass: loadrt timedelay names=delay-feed,delay-rapid
twopass: loadrt mux4 names=lcdselector,jog-scale-xy,jog-scale-z,jog-scale-a
twopass: loadrt conv_float_u32 names=lcdconv
twopass: loadrt conv_u32_float names=convflutes
twopass: loadrt calctool names=toolpara
twopass: loadrt not names=watchdog,fault
twopass: loadrt or2 names=estop-all,nofaultXY,nofaultXYZ,nofaultALL,two-probes
twopass: loadrt flipflop names=flipflop_ena
twopass: loadrt and2 names=ON_OK,and_x,and_y,and_z,and_a,and_setx,and_sety,and_setz,and_turtle,and_feedplus,and_spindleplus,and_spindleminus,and_feedminus,and_start,and_enaA,and_errblkA
twopass: loadrt oneshot names=fan-delay
twopass: loadrt ilowpass names=lowpass-x,lowpass-y,lowpass-z,lowpass-a
twopass: loadrt pid names=spind-pid
twopass: loadrt mult2 names=spind-scaler,spind-mul,spind-rpm
twopass: loadrt classicladder_rt
creating ladder-state
twopass: pass0:END
twopass: pass1:BEGIN
twopass: sourcing: /tmp/main.hal.tmp
twopass: sourcing: /tmp/7i76e.hal.tmp
twopass: sourcing: /tmp/all_pre_postgui.hal.tmp
twopass: sourcing: /tmp/home_limit.hal.tmp
twopass: sourcing: /tmp/classicladder.hal.tmp
twopass: nodelete: /tmp/main.hal.tmp
twopass: nodelete: /tmp/all_pre_postgui.hal.tmp
twopass: nodelete: /tmp/home_limit.hal.tmp
twopass: nodelete: /tmp/classicladder.hal.tmp
twopass: nodelete: /tmp/7i76e.hal.tmp
twopass: pass1:END
INFO CLASSICLADDER-   No ladder GUI requested-Realtime runs till HAL closes.
/usr/bin/milltask exiting
<commandline>:0: milltask exited without becoming ready
gladevcp: auxiliary dir: /usr/share/linuxcnc/aux_gladevcp/NativeCAM
gladevcp: importing: /usr/share/linuxcnc/aux_gladevcp/NativeCAM/pref_edit.py
gladevcp: importing: /usr/share/linuxcnc/aux_gladevcp/NativeCAM/ncam.py
(0, ' = ', '/usr/bin/gmoccapy')
(1, ' = ', '-ini')
(2, ' = ', '/home/cnc/linuxcnc/configs/MeBigCNC3/MeBigCNC3.ini')
**** GMOCCAPY GETINIINFO **** 
Preference file path: /home/cnc/linuxcnc/configs/MeBigCNC3/MeBigCNC3.pref
('found kinematics module', ['trivkins'])
('Entry =', 'trivkins')
no coordinates found in [KINS] KINEMATICS, we will use order from
[TRAJ] COORDINATES
('Number of joints = ', 4)
4 COORDINATES found = xyza
axis x = joint 0
axis y = joint 1
axis z = joint 2
axis a = joint 3
Combi_DRO_y = joint 1
Combi_DRO_x = joint 0
Combi_DRO_z = joint 2
Combi_DRO_4 = joint 3


--------------------------------- Here I aboard after ca minutes by clicking on close application --------------------


**** GMOCCAPY INFO ****
**** Keine gmoccapy Glade 2 Datei verfügbar ****
/usr/bin/linuxcnc: Zeile 880:  4649 Getötet                $EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS
Shutting down and cleaning up LinuxCNC...
hm2_eth: HostMot2 ethernet driver unloaded
hm2: unloading
Note: Using POSIX realtime
LinuxCNC terminated with an error.  You can find more information in the log:
    /home/cnc/linuxcnc_debug.txt
and
    /home/cnc/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal