Runtests results:

ntu@ryzen ~/linuxcnc/scripts $ ./runtests
Running test: /home/ntu/linuxcnc/tests/abort/feed-rate
Skipping disabled test: /home/ntu/linuxcnc/tests/abort/g64
Running test: /home/ntu/linuxcnc/tests/abort/on_abort_command-crazy-move
Running test: /home/ntu/linuxcnc/tests/abort/stop-button-crazy-move
Running test: /home/ntu/linuxcnc/tests/abs.0
Running test: /home/ntu/linuxcnc/tests/alias.0
Running test: /home/ntu/linuxcnc/tests/and-or-not-mux.0
Running test: /home/ntu/linuxcnc/tests/basic
Running test: /home/ntu/linuxcnc/tests/biquad
Running test: /home/ntu/linuxcnc/tests/build/header-sanity
Running test: /home/ntu/linuxcnc/tests/build/ui
Running test: /home/ntu/linuxcnc/tests/ccomp/early-exit
Running test: /home/ntu/linuxcnc/tests/ccomp/lathe-comp
Running test: /home/ntu/linuxcnc/tests/ccomp/mill-g90g91g92
Running test: /home/ntu/linuxcnc/tests/ccomp/mill-line-arc-entry
Running test: /home/ntu/linuxcnc/tests/ccomp/mill-zchanges
Running test: /home/ntu/linuxcnc/tests/counter-encoder.0
Running test: /home/ntu/linuxcnc/tests/edge/both-starting-high
Running test: /home/ntu/linuxcnc/tests/edge/both
Running test: /home/ntu/linuxcnc/tests/edge/falling-starting-high
Running test: /home/ntu/linuxcnc/tests/edge/falling
Running test: /home/ntu/linuxcnc/tests/edge/rising-starting-high
Running test: /home/ntu/linuxcnc/tests/edge/rising
Running test: /home/ntu/linuxcnc/tests/flipflop.0
Running test: /home/ntu/linuxcnc/tests/hal-link-unlink
Running test: /home/ntu/linuxcnc/tests/halcompile/extralib
Running test: /home/ntu/linuxcnc/tests/halcompile/names
Running test: /home/ntu/linuxcnc/tests/halcompile/personalities_mod
Running test: /home/ntu/linuxcnc/tests/halcompile/relative-header-user
Running test: /home/ntu/linuxcnc/tests/halcompile/relative-header
Running test: /home/ntu/linuxcnc/tests/halcompile/serial-out-of-tree
Running test: /home/ntu/linuxcnc/tests/halcompile/userspace-count-names
Running test: /home/ntu/linuxcnc/tests/halcompile/userspace
Running test: /home/ntu/linuxcnc/tests/halmodule.0
Running test: /home/ntu/linuxcnc/tests/halmodule.1
Running test: /home/ntu/linuxcnc/tests/halrun-getopt-reset
Running test: /home/ntu/linuxcnc/tests/halrun-lock
Running test: /home/ntu/linuxcnc/tests/halui/jogging
Running test: /home/ntu/linuxcnc/tests/halui/mdi
Running test: /home/ntu/linuxcnc/tests/hard-limits
Running test: /home/ntu/linuxcnc/tests/hm2-idrom
Running test: /home/ntu/linuxcnc/tests/ilowpass/low-gain
Running test: /home/ntu/linuxcnc/tests/ilowpass/wrap-around
Running test: /home/ntu/linuxcnc/tests/interp/abort-hot-comment
Running test: /home/ntu/linuxcnc/tests/interp/bad
Running test: /home/ntu/linuxcnc/tests/interp/cam-nisley
Running test: /home/ntu/linuxcnc/tests/interp/compile
*** /home/ntu/linuxcnc/tests/interp/compile: XFAIL: test run exited with 1
Running test: /home/ntu/linuxcnc/tests/interp/crazy-paths
Running test: /home/ntu/linuxcnc/tests/interp/do-while-break
Running test: /home/ntu/linuxcnc/tests/interp/exists
Running test: /home/ntu/linuxcnc/tests/interp/flowsnake
Running test: /home/ntu/linuxcnc/tests/interp/fractional-linenumbers
Running test: /home/ntu/linuxcnc/tests/interp/g10/g10-l1-l10
Running test: /home/ntu/linuxcnc/tests/interp/g10/g10-l11
Running test: /home/ntu/linuxcnc/tests/interp/g10/g10-l2-while-active
Running test: /home/ntu/linuxcnc/tests/interp/g10/g10-l20-while-active
Running test: /home/ntu/linuxcnc/tests/interp/g10/g10-with-g92
Running test: /home/ntu/linuxcnc/tests/interp/g33.1
Running test: /home/ntu/linuxcnc/tests/interp/g52/g52-g92-interaction
Running test: /home/ntu/linuxcnc/tests/interp/g52/g92-offset-persistence
Running test: /home/ntu/linuxcnc/tests/interp/g6164
Running test: /home/ntu/linuxcnc/tests/interp/g76
Running test: /home/ntu/linuxcnc/tests/interp/g81/g17/g98
Running test: /home/ntu/linuxcnc/tests/interp/g81/g17/g99
Running test: /home/ntu/linuxcnc/tests/interp/g81/g18/g98
Running test: /home/ntu/linuxcnc/tests/interp/g81/g18/g99
Running test: /home/ntu/linuxcnc/tests/interp/g81/g19/g98
Running test: /home/ntu/linuxcnc/tests/interp/g81/g19/g99
Running test: /home/ntu/linuxcnc/tests/interp/g84/g17/g98
Running test: /home/ntu/linuxcnc/tests/interp/g84/g17/g99
Running test: /home/ntu/linuxcnc/tests/interp/g84/g18/g98
Running test: /home/ntu/linuxcnc/tests/interp/g84/g18/g99
Running test: /home/ntu/linuxcnc/tests/interp/g84/g19/g98
Running test: /home/ntu/linuxcnc/tests/interp/g84/g19/g99
Running test: /home/ntu/linuxcnc/tests/interp/good
Running test: /home/ntu/linuxcnc/tests/interp/iniparam-failassign
Running test: /home/ntu/linuxcnc/tests/interp/iniparam
Running test: /home/ntu/linuxcnc/tests/interp/inside-corners
Running test: /home/ntu/linuxcnc/tests/interp/inverse-time-with-comp
Running test: /home/ntu/linuxcnc/tests/interp/m19
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/01-basics
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/02-variables
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/03-error-M98-no-P-word
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/04-M98-but-no-sub
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/05-M98-loops
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/06-error-mixed-sub-styles
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/07-nested-subs
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/08-sub-follows-main
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/09-disable-fanuc-subs
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/10-M98-P001
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/11-main-program-oword
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/12-M99-endless-main-program
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/13-named-program
Running test: /home/ntu/linuxcnc/tests/interp/m98m99/14-o-expression-call
Running test: /home/ntu/linuxcnc/tests/interp/mdi-oword-m66
rp/compile: XFAIL: test run exited wiRunning test: /home/ntu/linuxcnc/tests/interp/namedparam-bug424
Running test: /home/ntu/linuxcnc/tests/interp/oword-bug315-p2
Running test: /home/ntu/linuxcnc/tests/interp/oword-bug315
Running test: /home/ntu/linuxcnc/tests/interp/oword-mdi-sub-update
Running test: /home/ntu/linuxcnc/tests/interp/oword-unwind
Running test: /home/ntu/linuxcnc/tests/interp/plug
Running test: /home/ntu/linuxcnc/tests/interp/pymove
Running test: /home/ntu/linuxcnc/tests/interp/python-self
Running test: /home/ntu/linuxcnc/tests/interp/python/error
Running test: /home/ntu/linuxcnc/tests/interp/return-value
Running test: /home/ntu/linuxcnc/tests/interp/rotation/abs-pts
Running test: /home/ntu/linuxcnc/tests/interp/rotation/g28
Running test: /home/ntu/linuxcnc/tests/interp/rotation/g53
Running test: /home/ntu/linuxcnc/tests/interp/sequence-number
Running test: /home/ntu/linuxcnc/tests/interp/subroutine-return
Running test: /home/ntu/linuxcnc/tests/interp/subs-follow-main
Running test: /home/ntu/linuxcnc/tests/interp/value-returned
Running test: /home/ntu/linuxcnc/tests/io-startup/nonrandom/no-tool-in-P0
Running test: /home/ntu/linuxcnc/tests/io-startup/nonrandom/tool-in-P0
Running test: /home/ntu/linuxcnc/tests/io-startup/random/no-tool-in-P0
Running test: /home/ntu/linuxcnc/tests/io-startup/random/tool-in-P0
Running test: /home/ntu/linuxcnc/tests/lathe
Running test: /home/ntu/linuxcnc/tests/limit3/constraints
Running test: /home/ntu/linuxcnc/tests/limit3/limit-accel-and-max
Running test: /home/ntu/linuxcnc/tests/limit3/limit-max-velocity
Running test: /home/ntu/linuxcnc/tests/limit3/lock-on-input-and-limits
Running test: /home/ntu/linuxcnc/tests/limit3/min-max-overshoot
Running test: /home/ntu/linuxcnc/tests/limit3/runaway
Running test: /home/ntu/linuxcnc/tests/limit3/sunny-day
Running test: /home/ntu/linuxcnc/tests/linuxcncrsh-tcp
*** /home/ntu/linuxcnc/tests/linuxcncrsh-tcp: XFAIL: test run exited with 1
Running test: /home/ntu/linuxcnc/tests/linuxcncrsh
*** /home/ntu/linuxcnc/tests/linuxcncrsh: XFAIL: test run exited with 1
Running test: /home/ntu/linuxcnc/tests/loadrt.1
*** /home/ntu/linuxcnc/tests/loadrt.1: XFAIL: test run exited with 1
Running test: /home/ntu/linuxcnc/tests/loadrt.2
--- /home/ntu/linuxcnc/tests/loadrt.2/expected  2022-07-20 22:22:38.126865691 -0500
+++ /home/ntu/linuxcnc/tests/loadrt.2/result    2022-07-20 23:55:22.705128924 -0500
@@ -1,2 +0,0 @@
-and2.0 or2.0 streamer.0
-and2.0.in0 and2.0.in1 and2.0.out and2.0.time or2.0.in0 or2.0.in1 or2.0.out or2.0.time streamer.0.clock streamer.0.clock-mode streamer.0.curr-depth streamer.0.empty streamer.0.enable streamer.0.pin.0 streamer.0.time streamer.0.underruns
*** /home/ntu/linuxcnc/tests/loadrt.2: XFAIL: result differed from expected
Running test: /home/ntu/linuxcnc/tests/lowlevel/mutex
Running test: /home/ntu/linuxcnc/tests/m70-m73/m70m72-restore.0
Running test: /home/ntu/linuxcnc/tests/m70-m73/m73-flood-mist-restore.0
Running test: /home/ntu/linuxcnc/tests/m70-m73/m73autorestore.0
Running test: /home/ntu/linuxcnc/tests/mdi-queue-length
Running test: /home/ntu/linuxcnc/tests/mdi-queue/oword-queue-buster
*** /home/ntu/linuxcnc/tests/mdi-queue/oword-queue-buster: XFAIL: test run exited with 1
Running test: /home/ntu/linuxcnc/tests/mdi-queue/simple-queue-buster
*** /home/ntu/linuxcnc/tests/mdi-queue/simple-queue-buster: XFAIL: test run exited with 1
Running test: /home/ntu/linuxcnc/tests/mdi-while-queuebuster-waitflag
Running test: /home/ntu/linuxcnc/tests/modparam.0
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder/1-names
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder/8-names
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder/9-names
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder/num_chan=0
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder/num_chan=1
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder/num_chan=8
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder/num_chan=9
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder_ratio/1-names
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder_ratio/8-names
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder_ratio/9-names
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder_ratio/num_chan=0
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder_ratio/num_chan=1
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder_ratio/num_chan=8
Running test: /home/ntu/linuxcnc/tests/module-loading/encoder_ratio/num_chan=9
Running test: /home/ntu/linuxcnc/tests/module-loading/or2/0-names
Running test: /home/ntu/linuxcnc/tests/module-loading/or2/1-names
Running test: /home/ntu/linuxcnc/tests/module-loading/or2/16-names
Running test: /home/ntu/linuxcnc/tests/module-loading/or2/count=1
Running test: /home/ntu/linuxcnc/tests/module-loading/or2/count=16
Running test: /home/ntu/linuxcnc/tests/module-loading/or2/count=17
Running test: /home/ntu/linuxcnc/tests/module-loading/pid/1-names
Running test: /home/ntu/linuxcnc/tests/module-loading/pid/16-names
Running test: /home/ntu/linuxcnc/tests/module-loading/pid/17-names
Running test: /home/ntu/linuxcnc/tests/module-loading/pid/num_chan=0
Running test: /home/ntu/linuxcnc/tests/module-loading/pid/num_chan=1
Running test: /home/ntu/linuxcnc/tests/module-loading/pid/num_chan=16
Running test: /home/ntu/linuxcnc/tests/module-loading/pid/num_chan=17
Running test: /home/ntu/linuxcnc/tests/module-loading/rtapi-app-main-fails
loadrt found the test component, and it failed to load
Running test: /home/ntu/linuxcnc/tests/module-loading/siggen/1-names
Running test: /home/ntu/linuxcnc/tests/module-loading/siggen/16-names
Running test: /home/ntu/linuxcnc/tests/module-loading/siggen/17-names
Running test: /home/ntu/linuxcnc/tests/module-loading/siggen/num_chan=0
Running test: /home/ntu/linuxcnc/tests/module-loading/siggen/num_chan=1
Running test: /home/ntu/linuxcnc/tests/module-loading/siggen/num_chan=16
Running test: /home/ntu/linuxcnc/tests/module-loading/siggen/num_chan=17
Running test: /home/ntu/linuxcnc/tests/module-loading/sim_encoder/1-names
Running test: /home/ntu/linuxcnc/tests/module-loading/sim_encoder/8-names
Running test: /home/ntu/linuxcnc/tests/module-loading/sim_encoder/9-names
Running test: /home/ntu/linuxcnc/tests/module-loading/sim_encoder/num_chan=0
Running test: /home/ntu/linuxcnc/tests/module-loading/sim_encoder/num_chan=1
Running test: /home/ntu/linuxcnc/tests/module-loading/sim_encoder/num_chan=8
Running test: /home/ntu/linuxcnc/tests/module-loading/sim_encoder/num_chan=9
Running test: /home/ntu/linuxcnc/tests/motion-logger/basic
Running test: /home/ntu/linuxcnc/tests/motion-logger/mountaindew
Skipping disabled test: /home/ntu/linuxcnc/tests/motion-logger/startup-gcode-abort
Running test: /home/ntu/linuxcnc/tests/motion/g0 <- Hanging here so far