[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe5e000 (usable) [ 0.000000] BIOS-e820: 00000000cfe5e000 - 00000000cfee8000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee8000 - 00000000cfeec000 (usable) [ 0.000000] BIOS-e820: 00000000cfeec000 - 00000000cfeff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfeff000 - 00000000cff00000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Omni Tech Corp /D945GTP, BIOS NT94510J.86A.4076.2007.0313.2225 03/13/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back [ 0.000000] 3 base 0CFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fe680] fe680 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] [ 0.000000] RAMDISK: 36528000 - 3728c000 [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 INTEL ) [ 0.000000] ACPI: RSDT cfefde48 00054 (v01 INTEL D945GTP 00000FEC MSFT 01000013) [ 0.000000] ACPI: FACP cfefcf10 00074 (v01 INTEL D945GTP 00000FEC MSFT 01000013) [ 0.000000] ACPI: DSDT cfef7010 04348 (v01 INTEL D945GTP 00000FEC MSFT 01000013) [ 0.000000] ACPI: FACS cfedcc40 00040 [ 0.000000] ACPI: APIC cfefce10 00078 (v01 INTEL D945GTP 00000FEC MSFT 01000013) [ 0.000000] ACPI: WDDT cfef6f90 00040 (v01 INTEL D945GTP 00000FEC MSFT 01000013) [ 0.000000] ACPI: MCFG cfef6f10 0003C (v01 INTEL D945GTP 00000FEC MSFT 01000013) [ 0.000000] ACPI: ASF! cfefcd10 000A6 (v32 INTEL D945GTP 00000FEC MSFT 01000013) [ 0.000000] ACPI: SSDT cfefdc10 001BC (v01 INTEL CpuPm 00000FEC MSFT 01000013) [ 0.000000] ACPI: SSDT cfefda10 00175 (v01 INTEL Cpu0Ist 00000FEC MSFT 01000013) [ 0.000000] ACPI: SSDT cfefd810 00175 (v01 INTEL Cpu1Ist 00000FEC MSFT 01000013) [ 0.000000] ACPI: SSDT cfefd610 00175 (v01 INTEL Cpu2Ist 00000FEC MSFT 01000013) [ 0.000000] ACPI: SSDT cfefd410 00175 (v01 INTEL Cpu3Ist 00000FEC MSFT 01000013) [ 0.000000] ACPI: SSDT cfef6e90 0002F (v01 INTEL SetupVar 00000FEC MSFT 01000013) [ 0.000000] ACPI: TCPA cfe5e010 00915 (v01 INTEL TIANO 00000002 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2439MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000cff00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfe5e [ 0.000000] 0: 0x000cfee8 -> 0x000cfeec [ 0.000000] 0: 0x000cfeff -> 0x000cff00 [ 0.000000] On node 0 totalpages: 851442 [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f4b28200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4879 pages used for memmap [ 0.000000] HighMem zone: 619350 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30100000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f77a7000 s48384 r0 d21248 u69632 [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844787 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=261399a8-b091-4a05-9299-41059472d226 ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 6813568 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000cff00) [ 0.000000] Memory: 3351768k/3406848k available (3495k kernel code, 54000k reserved, 1237k data, 416k init, 2496916k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f4008000 soft=f400a000 [ 0.000000] Interrupt pipeline (release #3) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3399.826 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.65 BogoMIPS (lpj=13599304) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004078] Security Framework initialized [ 0.004084] AppArmor: AppArmor disabled by boot time parameter [ 0.004112] Mount-cache hash table entries: 512 [ 0.004383] Initializing cgroup subsys cpuacct [ 0.004387] Initializing cgroup subsys memory [ 0.004400] Initializing cgroup subsys devices [ 0.004404] Initializing cgroup subsys freezer [ 0.004407] Initializing cgroup subsys net_cls [ 0.004410] Initializing cgroup subsys blkio [ 0.004422] Initializing cgroup subsys perf_event [ 0.004469] CPU: Physical Processor ID: 0 [ 0.004473] CPU: Processor Core ID: 0 [ 0.004477] mce: CPU supports 4 MCE banks [ 0.004488] CPU0: Thermal monitoring enabled (TM1) [ 0.004565] ACPI: Core revision 20120320 [ 0.013545] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.013929] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.053622] CPU0: Intel(R) Pentium(R) D CPU 3.40GHz stepping 05 [ 0.056003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.056003] ... version: 0 [ 0.056003] ... bit width: 40 [ 0.056003] ... generic registers: 18 [ 0.056003] ... value mask: 000000ffffffffff [ 0.056003] ... max period: 0000007fffffffff [ 0.056003] ... fixed-purpose events: 0 [ 0.056003] ... event mask: 000000000003ffff [ 0.064037] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.076044] CPU 1 irqstacks, hard=f409a000 soft=f409c000 [ 0.076050] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.088034] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.088091] Brought up 2 CPUs [ 0.088096] Total of 2 processors activated (13599.30 BogoMIPS). [ 0.089620] devtmpfs: initialized [ 0.089620] PM: Registering ACPI NVS region [mem 0xcfe5e000-0xcfee7fff] (565248 bytes) [ 0.089620] dummy: [ 0.089620] NET: Registered protocol family 16 [ 0.089620] ACPI: bus type pci registered [ 0.089620] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.089620] PCI: not using MMCONFIG [ 0.094491] PCI: Using configuration type 1 for base access [ 0.095353] bio: create slab at 0 [ 0.095353] ACPI: Added _OSI(Module Device) [ 0.095353] ACPI: Added _OSI(Processor Device) [ 0.095353] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.095353] ACPI: Added _OSI(Processor Aggregator Device) [ 0.097802] ACPI: EC: Look up EC in DSDT [ 0.102878] ACPI: Interpreter enabled [ 0.102894] ACPI: (supports S0 S1 S3 S4 S5) [ 0.102948] ACPI: Using IOAPIC for interrupt routing [ 0.102979] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.104035] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources [ 0.104041] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!) [ 0.104044] PCI: Using MMCONFIG for extended config space [ 0.112068] ACPI: No dock devices found. [ 0.112078] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.113882] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.117365] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.117372] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.117376] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.117380] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] (ignored) [ 0.117385] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored) [ 0.117389] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xf0000000] (ignored) [ 0.117393] PCI: root bus 00: using default resources [ 0.117445] PCI host bridge to bus 0000:00 [ 0.117450] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.117454] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.117470] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000 [ 0.117538] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400 [ 0.117594] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.117655] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.117732] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.117769] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.117846] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.117879] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.117956] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.117991] pci 0000:00:1c.4: [8086:27e0] type 01 class 0x060400 [ 0.118068] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.118101] pci 0000:00:1c.5: [8086:27e2] type 01 class 0x060400 [ 0.118178] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.118211] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.118266] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] [ 0.118307] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.118362] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] [ 0.118404] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.118458] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] [ 0.118499] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.118553] pci 0000:00:1d.3: reg 20: [io 0x3020-0x303f] [ 0.118607] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.118633] pci 0000:00:1d.7: reg 10: [mem 0xe3200400-0xe32007ff] [ 0.118723] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.118750] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.118829] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.118936] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.118956] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.119001] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.119019] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.119032] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.119045] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.119058] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.119071] pci 0000:00:1f.1: reg 20: [io 0x30b0-0x30bf] [ 0.119121] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 [ 0.119144] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf] [ 0.119156] pci 0000:00:1f.2: reg 14: [io 0x30e4-0x30e7] [ 0.119168] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7] [ 0.119180] pci 0000:00:1f.2: reg 1c: [io 0x30e0-0x30e3] [ 0.119191] pci 0000:00:1f.2: reg 20: [io 0x30a0-0x30af] [ 0.119204] pci 0000:00:1f.2: reg 24: [mem 0xe3200000-0xe32003ff] [ 0.119241] pci 0000:00:1f.2: PME# supported from D3hot [ 0.119264] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.119328] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] [ 0.119431] pci 0000:01:00.0: [10de:0193] type 00 class 0x030000 [ 0.119447] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff] [ 0.119464] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.119480] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit] [ 0.119491] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.119503] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.119546] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.119558] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.119564] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.119570] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe2ffffff] [ 0.119577] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.119664] pci 0000:02:00.0: [8086:108c] type 00 class 0x020000 [ 0.119694] pci 0000:02:00.0: reg 10: [mem 0xe3180000-0xe319ffff] [ 0.119715] pci 0000:02:00.0: reg 14: [mem 0xe3100000-0xe317ffff] [ 0.119737] pci 0000:02:00.0: reg 18: [io 0x1000-0x101f] [ 0.119866] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.119945] pci 0000:02:00.3: [8086:108f] type 00 class 0x070002 [ 0.119975] pci 0000:02:00.3: reg 10: [io 0x1020-0x1027] [ 0.119997] pci 0000:02:00.3: reg 14: [mem 0xe31a1000-0xe31a1fff] [ 0.120155] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold [ 0.120223] pci 0000:02:00.4: [8086:108e] type 00 class 0x0c0701 [ 0.120253] pci 0000:02:00.4: reg 10: [mem 0xe31a0000-0xe31a0fff] [ 0.120275] pci 0000:02:00.4: reg 14: [io 0x1028-0x102b] [ 0.120422] pci 0000:02:00.4: PME# supported from D0 D3hot D3cold [ 0.120465] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.120490] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.120497] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.120503] pci 0000:00:1c.0: bridge window [mem 0xe3100000-0xe31fffff] [ 0.120563] pci 0000:00:1c.2: PCI bridge to [bus 03-03] [ 0.120572] pci 0000:00:1c.2: bridge window [mem 0xe3300000-0xe33fffff] [ 0.120635] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.120644] pci 0000:00:1c.3: bridge window [mem 0xe3400000-0xe34fffff] [ 0.120704] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.120713] pci 0000:00:1c.4: bridge window [mem 0xe3500000-0xe35fffff] [ 0.120772] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.120781] pci 0000:00:1c.5: bridge window [mem 0xe3600000-0xe36fffff] [ 0.120840] pci 0000:07:05.0: [104c:8024] type 00 class 0x0c0010 [ 0.120865] pci 0000:07:05.0: reg 10: [mem 0xe3004000-0xe30047ff] [ 0.120879] pci 0000:07:05.0: reg 14: [mem 0xe3000000-0xe3003fff] [ 0.120958] pci 0000:07:05.0: supports D1 D2 [ 0.120961] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot [ 0.121015] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) [ 0.121024] pci 0000:00:1e.0: bridge window [mem 0xe3000000-0xe30fffff] [ 0.121033] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.121037] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.121076] pci_bus 0000:00: on NUMA node 0 [ 0.121082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.121498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.122051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.122184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.122311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.122437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.122564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.122752] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) [ 0.133179] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.133319] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) [ 0.133454] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12) [ 0.133589] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) [ 0.133724] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.133861] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.133998] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.134136] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.134236] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.134236] vgaarb: loaded [ 0.134236] vgaarb: bridge control possible 0000:01:00.0 [ 0.134236] PCI: Using ACPI for IRQ routing [ 0.136127] PCI: pci_cache_line_size set to 64 bytes [ 0.136258] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.136262] reserve RAM buffer: 00000000cfe5e000 - 00000000cfffffff [ 0.136266] reserve RAM buffer: 00000000cfeec000 - 00000000cfffffff [ 0.136270] reserve RAM buffer: 00000000cff00000 - 00000000cfffffff [ 0.136542] hpet clockevent registered [ 0.136551] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.136560] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.138595] Switching to clocksource hpet [ 0.138697] pnp: PnP ACPI init [ 0.138718] ACPI: bus type pnp registered [ 0.138718] pnp 00:00: [bus 00-ff] [ 0.138718] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.138718] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.138718] pnp 00:00: [io 0x0d00-0xffff window] [ 0.138718] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.138718] pnp 00:00: [mem 0x000e0000-0x000effff window] [ 0.138718] pnp 00:00: [mem 0xf8000000-0xfebfffff window] [ 0.138718] pnp 00:00: [mem 0xd0000000-0xf0000000 window] [ 0.138718] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.138718] pnp 00:01: [mem 0xf0000000-0xf3ffffff] [ 0.138718] pnp 00:01: [mem 0xfed13000-0xfed13fff] [ 0.138718] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.138718] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.138718] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.138718] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.138718] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 0.138718] pnp 00:01: [mem 0xfed45000-0xfed99fff] [ 0.138718] pnp 00:01: [mem 0x000c0000-0x000dffff] [ 0.138718] pnp 00:01: [mem 0x000e0000-0x000fffff] [ 0.138718] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.138718] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved [ 0.138718] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.138718] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.138718] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.138718] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.138718] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.138718] system 00:01: [mem 0xfed45000-0xfed99fff] has been reserved [ 0.138718] system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.138718] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.138718] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.138718] pnp 00:02: [io 0x0000-0x000f] [ 0.138718] pnp 00:02: [io 0x0081-0x0083] [ 0.138718] pnp 00:02: [io 0x0087] [ 0.138718] pnp 00:02: [io 0x0089-0x008b] [ 0.138718] pnp 00:02: [io 0x008f] [ 0.138718] pnp 00:02: [io 0x00c0-0x00df] [ 0.138718] pnp 00:02: [dma 4] [ 0.138718] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.138718] pnp 00:03: [io 0x0070-0x0071] [ 0.138718] pnp 00:03: [io 0x0074-0x0077] [ 0.138718] pnp 00:03: [irq 8] [ 0.138718] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.138718] pnp 00:04: [io 0x00f0] [ 0.138718] pnp 00:04: [irq 13] [ 0.138732] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.138757] pnp 00:05: [io 0x0061] [ 0.138804] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.138827] pnp 00:06: [io 0x0500-0x053f] [ 0.138832] pnp 00:06: [io 0x0400-0x047f] [ 0.138835] pnp 00:06: [io 0x0092] [ 0.138839] pnp 00:06: [io 0x0680-0x06ff] [ 0.138842] pnp 00:06: [io 0x0010-0x001f] [ 0.138846] pnp 00:06: [io 0x0072-0x0073] [ 0.138849] pnp 00:06: [io 0x0080] [ 0.138852] pnp 00:06: [io 0x0084-0x0086] [ 0.138856] pnp 00:06: [io 0x0088] [ 0.138859] pnp 00:06: [io 0x008c-0x008e] [ 0.138863] pnp 00:06: [io 0x0090-0x009f] [ 0.138953] system 00:06: [io 0x0500-0x053f] has been reserved [ 0.138959] system 00:06: [io 0x0400-0x047f] has been reserved [ 0.138963] system 00:06: [io 0x0680-0x06ff] has been reserved [ 0.138969] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.139034] pnp 00:07: [mem 0xfed40000-0xfed44fff] [ 0.139118] system 00:07: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.139124] system 00:07: Plug and Play ACPI device, IDs PNP0c31 PNP0c02 (active) [ 0.139685] pnp 00:08: [io 0x0378-0x037f] [ 0.139690] pnp 00:08: [io 0x0778-0x077f] [ 0.139698] pnp 00:08: [irq 7] [ 0.139702] pnp 00:08: [dma 0 disabled] [ 0.139814] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.139889] pnp 00:09: [io 0x0060] [ 0.139893] pnp 00:09: [io 0x0064] [ 0.139901] pnp 00:09: [irq 1] [ 0.139957] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.140200] pnp 00:0a: [io 0x03f8-0x03ff] [ 0.140210] pnp 00:0a: [irq 4] [ 0.140327] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.140477] pnp 00:0b: [mem 0xfec00000-0xfec000ff] [ 0.140536] pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active) [ 0.140652] pnp: PnP ACPI: found 12 devices [ 0.140655] ACPI: ACPI bus type pnp unregistered [ 0.140660] PnPBIOS: Disabled by ACPI PNP [ 0.182344] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.182373] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000 [ 0.182387] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000 [ 0.182392] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000 [ 0.182404] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000 [ 0.182409] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000 [ 0.182422] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000 [ 0.182427] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000 [ 0.182439] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 06-06] add_size 1000 [ 0.182444] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-06] add_size 200000 [ 0.182468] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.182473] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.182477] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.182482] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.182486] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.182491] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.182495] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.182499] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.182503] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.182510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe3700000-0xe38fffff 64bit pref] [ 0.182515] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe3900000-0xe3afffff 64bit pref] [ 0.182520] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe3b00000-0xe3cfffff 64bit pref] [ 0.182525] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe3d00000-0xe3efffff 64bit pref] [ 0.182530] pci 0000:00:1c.5: BAR 15: assigned [mem 0xe3f00000-0xe40fffff 64bit pref] [ 0.182535] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff] [ 0.182540] pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff] [ 0.182545] pci 0000:00:1c.4: BAR 13: assigned [io 0x6000-0x6fff] [ 0.182549] pci 0000:00:1c.5: BAR 13: assigned [io 0x7000-0x7fff] [ 0.182561] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.182565] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.182570] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.182577] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe2ffffff] [ 0.182583] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.182591] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.182595] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.182603] pci 0000:00:1c.0: bridge window [mem 0xe3100000-0xe31fffff] [ 0.182609] pci 0000:00:1c.0: bridge window [mem 0xe3700000-0xe38fffff 64bit pref] [ 0.182618] pci 0000:00:1c.2: PCI bridge to [bus 03-03] [ 0.182622] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.182630] pci 0000:00:1c.2: bridge window [mem 0xe3300000-0xe33fffff] [ 0.182636] pci 0000:00:1c.2: bridge window [mem 0xe3900000-0xe3afffff 64bit pref] [ 0.182645] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.182649] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.182657] pci 0000:00:1c.3: bridge window [mem 0xe3400000-0xe34fffff] [ 0.182663] pci 0000:00:1c.3: bridge window [mem 0xe3b00000-0xe3cfffff 64bit pref] [ 0.182672] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.182676] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.182684] pci 0000:00:1c.4: bridge window [mem 0xe3500000-0xe35fffff] [ 0.182690] pci 0000:00:1c.4: bridge window [mem 0xe3d00000-0xe3efffff 64bit pref] [ 0.182699] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.182703] pci 0000:00:1c.5: bridge window [io 0x7000-0x7fff] [ 0.182711] pci 0000:00:1c.5: bridge window [mem 0xe3600000-0xe36fffff] [ 0.182717] pci 0000:00:1c.5: bridge window [mem 0xe3f00000-0xe40fffff 64bit pref] [ 0.182726] pci 0000:00:1e.0: PCI bridge to [bus 07-07] [ 0.182733] pci 0000:00:1e.0: bridge window [mem 0xe3000000-0xe30fffff] [ 0.182818] pci 0000:00:1e.0: setting latency timer to 64 [ 0.182825] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.182830] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.182834] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.182838] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe2ffffff] [ 0.182842] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.182846] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.182849] pci_bus 0000:02: resource 1 [mem 0xe3100000-0xe31fffff] [ 0.182853] pci_bus 0000:02: resource 2 [mem 0xe3700000-0xe38fffff 64bit pref] [ 0.182857] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.182861] pci_bus 0000:03: resource 1 [mem 0xe3300000-0xe33fffff] [ 0.182864] pci_bus 0000:03: resource 2 [mem 0xe3900000-0xe3afffff 64bit pref] [ 0.182868] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff] [ 0.182872] pci_bus 0000:04: resource 1 [mem 0xe3400000-0xe34fffff] [ 0.182876] pci_bus 0000:04: resource 2 [mem 0xe3b00000-0xe3cfffff 64bit pref] [ 0.182880] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] [ 0.182883] pci_bus 0000:05: resource 1 [mem 0xe3500000-0xe35fffff] [ 0.182887] pci_bus 0000:05: resource 2 [mem 0xe3d00000-0xe3efffff 64bit pref] [ 0.182891] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] [ 0.182895] pci_bus 0000:06: resource 1 [mem 0xe3600000-0xe36fffff] [ 0.182899] pci_bus 0000:06: resource 2 [mem 0xe3f00000-0xe40fffff 64bit pref] [ 0.182903] pci_bus 0000:07: resource 1 [mem 0xe3000000-0xe30fffff] [ 0.182906] pci_bus 0000:07: resource 4 [io 0x0000-0xffff] [ 0.182910] pci_bus 0000:07: resource 5 [mem 0x00000000-0xffffffff] [ 0.183033] NET: Registered protocol family 2 [ 0.183128] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.183400] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.183911] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.184187] TCP: Hash tables configured (established 131072 bind 65536) [ 0.184191] TCP: reno registered [ 0.184196] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.184207] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.184337] NET: Registered protocol family 1 [ 0.184647] pci 0000:01:00.0: Boot video device [ 0.184670] PCI: CLS 64 bytes, default 64 [ 0.184750] Unpacking initramfs... [ 0.549140] Freeing initrd memory: 13712k freed [ 0.556800] audit: initializing netlink socket (disabled) [ 0.556826] type=2000 audit(1497480001.552:1): initialized [ 0.570331] highmem bounce pool size: 64 pages [ 0.570339] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.570696] VFS: Disk quotas dquot_6.5.2 [ 0.570736] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.570849] msgmni has been set to 1696 [ 0.571190] alg: No test for stdrng (krng) [ 0.571254] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.571260] io scheduler noop registered [ 0.571263] io scheduler deadline registered [ 0.571298] io scheduler cfq registered (default) [ 0.571869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.571901] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.571905] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.572535] GHES: HEST is not enabled! [ 0.572556] isapnp: Scanning for PnP cards... [ 0.925828] isapnp: No Plug & Play device found [ 0.925922] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.946309] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.967265] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.967488] serial8250: skipping TxEn test for device [8086:108f] subsystem [8086:0000] [ 0.988263] 0000:02:00.3: ttyS1 at I/O 0x1020 (irq = 18) is a 16550A [ 0.988482] Linux agpgart interface v0.103 [ 0.988926] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.988930] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.990194] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.990395] mousedev: PS/2 mouse device common for all mice [ 0.990466] rtc_cmos 00:03: RTC can wake from S4 [ 0.990644] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.990675] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.990822] TCP: cubic registered [ 0.990924] NET: Registered protocol family 10 [ 0.991244] Mobile IPv6 [ 0.991249] NET: Registered protocol family 17 [ 0.991257] Registering the dns_resolver key type [ 0.991325] Using IPI No-Shortcut mode [ 0.991564] PM: Hibernation image not present or could not be loaded. [ 0.991583] registered taskstats version 1 [ 0.992240] rtc_cmos 00:03: setting system clock to 2017-06-14 22:40:02 UTC (1497480002) [ 0.992402] Freeing unused kernel memory: 416k freed [ 0.992708] Write protecting the kernel text: 3496k [ 0.992743] Write protecting the kernel read-only data: 984k [ 1.011409] udevd[49]: starting version 175 [ 1.016403] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.039344] usbcore: registered new interface driver usbfs [ 1.039382] usbcore: registered new interface driver hub [ 1.051816] SCSI subsystem initialized [ 1.062994] usbcore: registered new device driver usb [ 1.072498] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.072590] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.072598] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.072638] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.072667] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.072683] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.076935] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.076972] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3200400 [ 1.077922] e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k [ 1.077928] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 1.077958] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 1.078138] e1000e 0000:02:00.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.081587] libata version 3.00 loaded. [ 1.088150] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.088199] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.088205] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.088210] usb usb1: Product: EHCI Host Controller [ 1.088213] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 1.088217] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.088412] hub 1-0:1.0: USB hub found [ 1.088422] hub 1-0:1.0: 8 ports detected [ 1.088668] uhci_hcd: USB Universal Host Controller Interface driver [ 1.088750] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.088758] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.088778] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.088817] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 [ 1.088885] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.088890] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.088894] usb usb2: Product: UHCI Host Controller [ 1.088897] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.088901] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.089090] hub 2-0:1.0: USB hub found [ 1.089099] hub 2-0:1.0: 2 ports detected [ 1.089247] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.089254] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.089266] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.089316] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 [ 1.089376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.089380] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.089385] usb usb3: Product: UHCI Host Controller [ 1.089389] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.089393] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.089813] hub 3-0:1.0: USB hub found [ 1.089824] hub 3-0:1.0: 2 ports detected [ 1.089957] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.089965] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.089977] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.090022] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 [ 1.090076] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.090083] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.090087] usb usb4: Product: UHCI Host Controller [ 1.090090] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.090094] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.090271] hub 4-0:1.0: USB hub found [ 1.090281] hub 4-0:1.0: 2 ports detected [ 1.090428] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.090434] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.090446] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.090493] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020 [ 1.090544] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.090548] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.090553] usb usb5: Product: UHCI Host Controller [ 1.090558] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.090561] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.090732] hub 5-0:1.0: USB hub found [ 1.090741] hub 5-0:1.0: 2 ports detected [ 1.092825] ahci 0000:00:1f.2: version 3.0 [ 1.092960] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.092967] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part [ 1.092974] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.097803] scsi0 : ahci [ 1.099951] microcode: CPU0 sig=0xf65, pf=0x4, revision=0xb [ 1.100928] scsi1 : ahci [ 1.103977] scsi2 : ahci [ 1.106915] scsi3 : ahci [ 1.107509] ata1: SATA max UDMA/133 abar m1024@0xe3200000 port 0xe3200100 irq 19 [ 1.107518] ata2: SATA max UDMA/133 abar m1024@0xe3200000 port 0xe3200180 irq 19 [ 1.107523] ata3: SATA max UDMA/133 abar m1024@0xe3200000 port 0xe3200200 irq 19 [ 1.107531] ata4: SATA max UDMA/133 abar m1024@0xe3200000 port 0xe3200280 irq 19 [ 1.107622] ata_piix 0000:00:1f.1: version 2.13 [ 1.107696] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.109387] scsi4 : ata_piix [ 1.113566] scsi5 : ata_piix [ 1.114281] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14 [ 1.114289] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15 [ 1.115530] ata6: port disabled--ignoring [ 1.151482] microcode: CPU1 sig=0xf65, pf=0x4, revision=0xb [ 1.155031] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.156154] firewire_ohci 0000:07:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.187372] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:25:11:0d [ 1.187379] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.187395] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF [ 1.404045] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.424049] ata1: SATA link down (SStatus 0 SControl 300) [ 1.428045] ata2: SATA link down (SStatus 0 SControl 300) [ 1.428103] ata4: SATA link down (SStatus 0 SControl 300) [ 1.428164] ata3: SATA link down (SStatus 0 SControl 300) [ 1.537177] usb 1-1: New USB device found, idVendor=0480, idProduct=a006 [ 1.537186] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.537192] usb 1-1: Product: External USB 3.0 [ 1.537197] usb 1-1: Manufacturer: Toshiba [ 1.537202] usb 1-1: SerialNumber: 2011022603678 [ 1.541284] Initializing USB Mass Storage driver... [ 1.541465] scsi6 : usb-storage 1-1:1.0 [ 1.541856] usbcore: registered new interface driver usb-storage [ 1.541860] USB Mass Storage support registered. [ 1.556027] Refined TSC clocksource calibration: 3399.874 MHz. [ 1.556038] Switching to clocksource tsc [ 1.648030] usb 1-2: new high-speed USB device number 3 using ehci_hcd [ 1.656190] firewire_core 0000:07:05.0: created device fw0: GUID 0090270001f7078c, S400 [ 1.791556] usb 1-2: New USB device found, idVendor=05e3, idProduct=0512 [ 1.791564] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 1.791570] usb 1-2: Product: U2 EE Cam [ 1.791575] usb 1-2: Manufacturer: GenesysLogic Technology Co., Ltd. [ 1.932031] usb 1-3: new high-speed USB device number 4 using ehci_hcd [ 2.080939] usb 1-3: New USB device found, idVendor=0846, idProduct=9030 [ 2.080946] usb 1-3: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 2.080952] usb 1-3: Product: WNA1100 [ 2.080956] usb 1-3: Manufacturer: NETGEAR WNA [ 2.080961] usb 1-3: SerialNumber: 12345 [ 2.376032] usb 3-2: new low-speed USB device number 2 using uhci_hcd [ 2.540618] scsi 6:0:0:0: Direct-Access TOSHIBA External USB 3.0 0001 PQ: 0 ANSI: 6 [ 2.545234] sd 6:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.545974] sd 6:0:0:0: [sda] Write Protect is off [ 2.545981] sd 6:0:0:0: [sda] Mode Sense: 1f 00 00 08 [ 2.546722] sd 6:0:0:0: [sda] No Caching mode page present [ 2.546804] sd 6:0:0:0: [sda] Assuming drive cache: write through [ 2.549100] sd 6:0:0:0: [sda] No Caching mode page present [ 2.549181] sd 6:0:0:0: [sda] Assuming drive cache: write through [ 2.549446] usb 3-2: New USB device found, idVendor=1c4f, idProduct=0034 [ 2.549454] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.549460] usb 3-2: Product: Usb Mouse [ 2.549465] usb 3-2: Manufacturer: SIGMACHIP [ 4.022648] sda: sda1 sda2 < sda5 > [ 4.025395] sd 6:0:0:0: [sda] No Caching mode page present [ 4.025477] sd 6:0:0:0: [sda] Assuming drive cache: write through [ 4.025562] sd 6:0:0:0: [sda] Attached SCSI disk [ 4.028931] sd 6:0:0:0: Attached scsi generic sg0 type 0 [ 4.039106] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1 [ 4.039367] generic-usb 0003:1C4F:0034.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.1-2/input0 [ 4.039612] usbcore: registered new interface driver usbhid [ 4.039617] usbhid: USB HID core driver [ 6.486334] PM: Starting manual resume from disk [ 6.486340] PM: Hibernation image partition 8:5 present [ 6.486343] PM: Looking for hibernation image. [ 6.511892] PM: Image not found (code -22) [ 6.511898] PM: Hibernation image not present or could not be loaded. [ 6.527219] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 6.527225] EXT4-fs (sda1): write access will be enabled during recovery [ 8.623296] EXT4-fs (sda1): orphan cleanup on readonly fs [ 8.623309] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2239048 [ 8.651879] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 13899941 [ 8.651989] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 13899440 [ 8.652034] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 14155786 [ 8.652062] EXT4-fs (sda1): 4 orphan inodes deleted [ 8.652066] EXT4-fs (sda1): recovery complete [ 8.671682] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 11.243765] udevd[362]: starting version 175 [ 11.643612] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 11.643626] ACPI: Sleep Button [SLPB] [ 11.643741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 11.643749] ACPI: Power Button [PWRF] [ 12.027808] intel_rng: Firmware space is locked read-only. If you can't or [ 12.027811] intel_rng: don't want to disable this in firmware setup, and if [ 12.027813] intel_rng: you are certain that your system has a functional [ 12.027815] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 12.027839] ipmi message handler version 39.2 [ 12.030111] IPMI System Interface driver. [ 12.030134] ipmi_si 0000:02:00.4: probing via PCI [ 12.030158] ipmi_si 0000:02:00.4: [mem 0xe31a0000-0xe31a0fff] regsize 1 spacing 1 irq 19 [ 12.030162] ipmi_si: Adding PCI-specified kcs state machine [ 12.030217] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xe31a0000, slave address 0x0, irq 19 [ 12.083384] iTCO_vendor_support: vendor-support=0 [ 12.085236] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 12.085349] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 12.085865] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.103346] parport_pc 00:08: reported by Plug and Play ACPI [ 12.103435] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 12.156245] udevd[413]: renamed network interface eth0 to eth1 [ 12.324028] ipmi_si: There appears to be no BMC at this location [ 12.362860] leds_ss4200: no LED devices found [ 12.679886] Linux media interface: v0.10 [ 12.694399] Linux video capture interface: v2.00 [ 12.712750] uvcvideo: Found UVC 1.00 device U2 EE Cam (05e3:0512) [ 12.744238] cfg80211: Calling CRDA to update world regulatory domain [ 12.745075] input: U2 EE Cam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input4 [ 12.745309] usbcore: registered new interface driver uvcvideo [ 12.745313] USB Video Class driver (1.1.1) [ 13.229830] usb 1-3: ath9k_htc: Firmware htc_9271.fw requested [ 13.229889] usbcore: registered new interface driver ath9k_htc [ 13.497867] cfg80211: World regulatory domain updated: [ 13.497874] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.497878] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 13.497882] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 13.497886] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 13.497890] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 13.497893] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 13.497897] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 13.497901] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 13.497905] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 13.869825] usb 1-3: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 [ 14.105212] ath9k_htc 1-3:1.0: ath9k_htc: HTC initialized with 33 credits [ 14.298220] ath9k_htc 1-3:1.0: ath9k_htc: FW Version: 1.3 [ 14.298228] ath: EEPROM regdomain: 0x60 [ 14.298232] ath: EEPROM indicates we should expect a direct regpair map [ 14.298239] ath: Country alpha2 being used: 00 [ 14.298243] ath: Regpair used: 0x60 [ 14.324382] ieee80211 phy0: Atheros AR9271 Rev:1 [ 14.326651] Registered led device: ath9k_htc-phy0 [ 14.420344] udevd[413]: renamed network interface wlan0 to wlan1 [ 15.354947] Adding 6211580k swap on /dev/sda5. Priority:-1 extents:1 across:6211580k [ 15.376495] EXT4-fs (sda1): re-mounted. Opts: (null) [ 15.698956] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 15.842971] loop: module loaded [ 17.530225] RPC: Registered named UNIX socket transport module. [ 17.530233] RPC: Registered udp transport module. [ 17.530237] RPC: Registered tcp transport module. [ 17.530240] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.575717] FS-Cache: Loaded [ 17.606123] NFS: Registering the id_resolver key type [ 17.606150] FS-Cache: Netfs 'nfs' registered for caching [ 17.619016] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 19.967168] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5 [ 21.362205] Bluetooth: Core ver 2.16 [ 21.362242] NET: Registered protocol family 31 [ 21.362246] Bluetooth: HCI device and connection manager initialized [ 21.362250] Bluetooth: HCI socket layer initialized [ 21.362254] Bluetooth: L2CAP socket layer initialized [ 21.362264] Bluetooth: SCO socket layer initialized [ 21.604437] Bluetooth: RFCOMM TTY layer initialized [ 21.604448] Bluetooth: RFCOMM socket layer initialized [ 21.604453] Bluetooth: RFCOMM ver 1.11 [ 21.670839] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.670844] Bluetooth: BNEP filters: protocol multicast [ 22.013179] lp0: using parport0 (interrupt-driven). [ 22.064828] ppdev: user-space parallel port driver [ 25.733521] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 25.896235] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 27.915669] [drm] Initialized drm 1.1.0 20060810 [ 27.957197] wmi: Mapper loaded [ 27.999621] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x450300a2) [ 28.011693] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [ 28.068911] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 28.068915] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN [ 28.068919] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 28.068923] [drm] nouveau 0000:01:00.0: Bios version 60.80.20.00 [ 28.068927] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 28.069103] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 28.069108] [drm] nouveau 0000:01:00.0: DCB version 4.0 [ 28.069114] [drm] nouveau 0000:01:00.0: DCB outp 00: 04000320 00000028 [ 28.069121] [drm] nouveau 0000:01:00.0: DCB outp 01: 01000322 00000030 [ 28.069125] [drm] nouveau 0000:01:00.0: DCB outp 02: 02011310 00000028 [ 28.069129] [drm] nouveau 0000:01:00.0: DCB outp 03: 02011312 00000030 [ 28.069133] [drm] nouveau 0000:01:00.0: DCB outp 04: 010223f1 00c1c023 [ 28.069137] [drm] nouveau 0000:01:00.0: DCB conn 00: 1030 [ 28.069143] [drm] nouveau 0000:01:00.0: DCB conn 01: 2130 [ 28.069148] [drm] nouveau 0000:01:00.0: DCB conn 02: 0210 [ 28.069153] [drm] nouveau 0000:01:00.0: DCB conn 03: 0211 [ 28.069158] [drm] nouveau 0000:01:00.0: DCB conn 04: 0213 [ 28.069165] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC524 [ 28.091183] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC72F [ 28.107896] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD8EB [ 28.107905] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD9DA [ 28.108972] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDB91 [ 28.108976] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xDBF6 [ 28.128826] [drm] nouveau 0000:01:00.0: 0xDBF6: Condition still not met after 20ms, skipping following opcodes [ 28.133467] [TTM] Zone kernel: Available graphics memory: 434490 kiB [ 28.133475] [TTM] Zone highmem: Available graphics memory: 1682948 kiB [ 28.133480] [TTM] Initializing pool allocator [ 28.133504] [drm] nouveau 0000:01:00.0: Detected 640MiB VRAM (GDDR3) [ 28.134800] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 28.157627] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 28.157634] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing [ 28.160444] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 28.160450] [drm] No driver support for vblank timestamp query. [ 28.237520] adt7475 0-002e: ADT7476 device, revision 3 [ 28.237527] adt7475 0-002e: Optional features: in0 in4 fan4 pwm2 vid [ 28.245369] adt7475 4-002e: ADT7473 device, revision 0 [ 28.245375] adt7475 4-002e: Optional features: fan4 [ 28.248018] [drm] nouveau 0000:01:00.0: Detected monitoring device: adt7473 [ 28.248062] [drm] nouveau 0000:01:00.0: 1 available performance level(s) [ 28.248075] [drm] nouveau 0000:01:00.0: 0: core 520MHz shader 1188MHz memory 792MHz voltage 1300mV fanspeed 100% [ 28.248089] [drm] nouveau 0000:01:00.0: c: core 198MHz shader 1188MHz memory 396MHz [ 28.394509] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x310000, bo f6c6ee00 [ 28.394630] fbcon: nouveaufb (fb0) is primary device [ 28.394790] Console: switching to colour frame buffer device 128x48 [ 28.394803] fb0: nouveaufb frame buffer device [ 28.394808] drm: registered panic notifier [ 28.394816] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 28.765975] [drm] nouveau 0000:01:00.0: no native mode, forcing panel scaling [ 28.783109] [drm] nouveau 0000:01:00.0: no native mode, forcing panel scaling [ 28.828180] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 28.835751] e1000e 0000:02:00.0: eth1: MAC Wakeup cause - Link Status Change [ 31.757004] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 31.757215] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 186.380212] I-pipe: head domain RTAI registered. [ 186.380220] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 186.380326] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 186.380331] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499418, CLK_FREQ 3399826000, CPU_FREQ 3399826000 [ 186.380335] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 186.380340] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499418, 12499418, 4938000 [ 186.457552] RTAI[malloc]: global heap size = 2097152 bytes, . [ 186.457623] , , kstacks pool size = 524288 bytes. [ 186.457630] RTAI[sched]: hard timer type/freq = APIC/12499418(Hz); default timing: oneshot; linear timed lists. [ 186.457636] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399826000 hz. [ 186.457639] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 186.496768] RTAI[math]: loaded. [ 186.864733] config string '0x0378' [ 191.267346] spurious APIC interrupt on CPU#0, should never happen. [ 191.273911] RTAI[math]: unloaded. [ 191.276878] SCHED releases registered named ALIEN PEDV$D [ 191.281286] RTAI[malloc]: unloaded. [ 191.380033] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 191.382951] I-pipe: head domain RTAI unregistered. [ 191.383130] RTAI[hal]: unmounted. [ 276.692504] I-pipe: head domain RTAI registered. [ 276.692513] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 276.692603] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 276.692610] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499418, CLK_FREQ 3399826000, CPU_FREQ 3399826000 [ 276.692616] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 276.692621] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499418, 12499418, 12417250 [ 276.706367] RTAI[malloc]: global heap size = 2097152 bytes, . [ 276.706436] , , kstacks pool size = 524288 bytes. [ 276.706443] RTAI[sched]: hard timer type/freq = APIC/12499418(Hz); default timing: oneshot; linear timed lists. [ 276.706449] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399826000 hz. [ 276.706453] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 276.731869] RTAI[math]: loaded. [ 276.902401] config string '0x0378' [ 280.039252] RTAI[math]: unloaded. [ 280.042064] SCHED releases registered named ALIEN PEDV$D [ 280.055384] RTAI[malloc]: unloaded. [ 280.152026] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 280.154742] I-pipe: head domain RTAI unregistered. [ 280.154857] RTAI[hal]: unmounted. [ 393.172845] I-pipe: head domain RTAI registered. [ 393.172853] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 393.173037] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 393.173042] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499418, CLK_FREQ 3399826000, CPU_FREQ 3399826000 [ 393.173047] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 393.173052] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499418, 12499418, 12443750 [ 393.184091] RTAI[malloc]: global heap size = 2097152 bytes, . [ 393.184150] , , kstacks pool size = 524288 bytes. [ 393.184166] RTAI[sched]: hard timer type/freq = APIC/12499418(Hz); default timing: oneshot; linear timed lists. [ 393.184172] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399826000 hz. [ 393.184175] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 393.194160] RTAI[math]: loaded. [ 393.359913] config string '0x0378' [ 396.566240] RTAI[math]: unloaded. [ 396.569008] SCHED releases registered named ALIEN PEDV$D [ 396.584761] RTAI[malloc]: unloaded. [ 396.684025] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 396.686894] I-pipe: head domain RTAI unregistered. [ 396.687026] RTAI[hal]: unmounted. [ 719.790394] I-pipe: head domain RTAI registered. [ 719.790402] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 719.790509] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 719.790514] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499418, CLK_FREQ 3399826000, CPU_FREQ 3399826000 [ 719.790518] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 719.790523] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499418, 12499418, 12389750 [ 719.801832] RTAI[malloc]: global heap size = 2097152 bytes, . [ 719.801902] , , kstacks pool size = 524288 bytes. [ 719.801910] RTAI[sched]: hard timer type/freq = APIC/12499418(Hz); default timing: oneshot; linear timed lists. [ 719.801915] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399826000 hz. [ 719.801919] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 719.821528] RTAI[math]: loaded. [ 719.989413] config string '0x0378' [ 723.265283] RTAI[math]: unloaded. [ 723.267940] SCHED releases registered named ALIEN PEDV$D [ 723.271094] RTAI[malloc]: unloaded. [ 723.368094] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 723.370834] I-pipe: head domain RTAI unregistered. [ 723.370951] RTAI[hal]: unmounted.