[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37367000 - 37fef1b9 [ 0.000000] Allocated new RAMDISK: 008b5000 - 0153d1b9 [ 0.000000] Move RAMDISK from 0000000037367000 - 0000000037fef1b8 to 008b5000 - 0153d1b8 [ 0.000000] ACPI: RSDP 000f6cf0 00014 (v00 XPC ) [ 0.000000] ACPI: RSDT 7fff3000 0002C (v01 XPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 7fff3040 00074 (v01 XPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 7fff30c0 039BD (v01 XPC SB71 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7fff0000 00040 [ 0.000000] ACPI: APIC 7fff6a80 00068 (v01 XPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008b1000 - 00008b408a] BRK ==> [00008b1000 - 00008b408a] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008b5000 - 000153d1b9] NEW RAMDISK ==> [00008b5000 - 000153d1b9] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f5270] f5270 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524159 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c153f200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c2800000 s74936 r0 d23368 u2097152 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=22cd65ee-bce3-4f98-9b12-174f496d8370 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10485120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0) [ 0.000000] Memory: 2047268k/2097088k available (4539k kernel code, 48388k reserved, 1928k data, 620k init, 1187784k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3006.937 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6013.87 BogoMIPS (lpj=12027748) [ 0.008026] Security Framework initialized [ 0.008049] AppArmor: AppArmor initialized [ 0.008059] Mount-cache hash table entries: 512 [ 0.008227] Initializing cgroup subsys ns [ 0.008233] Initializing cgroup subsys cpuacct [ 0.008239] Initializing cgroup subsys memory [ 0.008250] Initializing cgroup subsys devices [ 0.008253] Initializing cgroup subsys freezer [ 0.008257] Initializing cgroup subsys net_cls [ 0.008288] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.008294] CPU: L2 cache: 1024K [ 0.008298] CPU: Physical Processor ID: 0 [ 0.008300] CPU: Processor Core ID: 0 [ 0.008305] mce: CPU supports 4 MCE banks [ 0.008319] CPU0: Thermal monitoring enabled (TM1) [ 0.008330] Performance Events: no PMU driver, software events only. [ 0.008339] Checking 'hlt' instruction... OK. [ 0.025188] ACPI: Core revision 20090903 [ 0.034598] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.034605] ftrace: allocating 21003 entries in 42 pages [ 0.049689] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.049988] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.052001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.052001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.052001] ..... (found apic 0 pin 2) ... [ 0.093388] ....... works. [ 0.093392] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 0.096001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.012000] Initializing CPU#1 [ 0.012000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.012000] CPU: L2 cache: 1024K [ 0.012000] CPU: Physical Processor ID: 0 [ 0.012000] CPU: Processor Core ID: 0 [ 0.012000] CPU1: Thermal monitoring enabled (TM1) [ 0.180079] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 0.180096] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.184023] Brought up 2 CPUs [ 0.184029] Total of 2 processors activated (12027.96 BogoMIPS). [ 0.184308] CPU0 attaching sched-domain: [ 0.184315] domain 0: span 0-1 level SIBLING [ 0.184319] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.184331] domain 1: span 0-1 level MC [ 0.184335] groups: 0-1 (cpu_power = 1178) [ 0.184346] CPU1 attaching sched-domain: [ 0.184350] domain 0: span 0-1 level SIBLING [ 0.184354] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.184365] domain 1: span 0-1 level MC [ 0.184369] groups: 0-1 (cpu_power = 1178) [ 0.184521] devtmpfs: initialized [ 0.184521] regulator: core version 0.5 [ 0.184521] NET: Registered protocol family 16 [ 0.184521] Trying to unpack rootfs image as initramfs... [ 0.184521] EISA bus registered [ 0.184521] ACPI: bus type pci registered [ 0.209789] PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=2 [ 0.209795] PCI: Using configuration type 1 for base access [ 0.211758] bio: create slab at 0 [ 0.213261] ACPI: EC: Look up EC in DSDT [ 0.222759] ACPI: Interpreter enabled [ 0.222765] ACPI: (supports S0 S5) [ 0.222802] ACPI: Using IOAPIC for interrupt routing [ 0.232471] ACPI: No dock devices found. [ 0.232643] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.232712] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.232729] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf3ffffff] [ 0.232862] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff] [ 0.232995] pci 0000:00:1d.0: reg 20 io port: [0xbc00-0xbc1f] [ 0.233069] pci 0000:00:1d.1: reg 20 io port: [0xb000-0xb01f] [ 0.233143] pci 0000:00:1d.2: reg 20 io port: [0xb400-0xb41f] [ 0.233217] pci 0000:00:1d.3: reg 20 io port: [0xb800-0xb81f] [ 0.233290] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8000000-0xf80003ff] [ 0.233362] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.233371] pci 0000:00:1d.7: PME# disabled [ 0.233493] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 0.233501] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO [ 0.233537] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.233548] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.233558] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.233569] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.233580] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] [ 0.233652] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.233715] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff] [ 0.233728] pci 0000:00:1f.5: reg 14 io port: [0xdc00-0xdc3f] [ 0.233740] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf8001000-0xf80011ff] [ 0.233751] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf8002000-0xf80020ff] [ 0.233794] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.233802] pci 0000:00:1f.5: PME# disabled [ 0.233859] pci 0000:01:00.0: reg 10 32bit mmio: [0xf4000000-0xf4ffffff] [ 0.233871] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.233901] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.233984] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff] [ 0.233994] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.234056] pci 0000:02:06.0: reg 10 32bit mmio: [0xf7030000-0xf70307ff] [ 0.234072] pci 0000:02:06.0: reg 14 io port: [0xa000-0xa07f] [ 0.234129] pci 0000:02:06.0: supports D2 [ 0.234134] pci 0000:02:06.0: PME# supported from D2 D3hot D3cold [ 0.234142] pci 0000:02:06.0: PME# disabled [ 0.234209] pci 0000:02:07.0: reg 10 32bit mmio: [0xf7000000-0xf700ffff] [ 0.234252] pci 0000:02:07.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.234292] pci 0000:02:07.0: PME# supported from D3hot D3cold [ 0.234300] pci 0000:02:07.0: PME# disabled [ 0.234348] pci 0000:02:08.0: reg 10 32bit mmio: [0xf7031000-0xf703107f] [ 0.234360] pci 0000:02:08.0: reg 14 io port: [0xa400-0xa47f] [ 0.234371] pci 0000:02:08.0: reg 18 io port: [0xa800-0xa8ff] [ 0.234382] pci 0000:02:08.0: reg 1c io port: [0xac00-0xacff] [ 0.234394] pci 0000:02:08.0: reg 20 32bit mmio: [0xf7010000-0xf701ffff] [ 0.234406] pci 0000:02:08.0: reg 24 32bit mmio: [0xf7020000-0xf702ffff] [ 0.234480] pci 0000:00:1e.0: transparent bridge [ 0.234489] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff] [ 0.234497] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] [ 0.234520] pci_bus 0000:00: on NUMA node 0 [ 0.234530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.234751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.250650] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 0.250852] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.251057] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.251258] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.251462] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.251671] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.251872] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.252102] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.252331] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.252343] vgaarb: loaded [ 0.252586] SCSI subsystem initialized [ 0.252740] libata version 3.00 loaded. [ 0.252881] usbcore: registered new interface driver usbfs [ 0.252912] usbcore: registered new interface driver hub [ 0.252964] usbcore: registered new device driver usb [ 0.253241] ACPI: WMI: Mapper loaded [ 0.253246] PCI: Using ACPI for IRQ routing [ 0.253516] NetLabel: Initializing [ 0.253521] NetLabel: domain hash size = 128 [ 0.253525] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.253551] NetLabel: unlabeled traffic allowed by default [ 0.253624] Switching to clocksource tsc [ 0.256073] AppArmor: AppArmor Filesystem Enabled [ 0.256092] pnp: PnP ACPI init [ 0.256125] ACPI: bus type pnp registered [ 0.262031] pnp: PnP ACPI: found 13 devices [ 0.262037] ACPI: ACPI bus type pnp unregistered [ 0.262045] PnPBIOS: Disabled by ACPI PNP [ 0.262065] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.262073] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.262081] system 00:01: ioport range 0x800-0x805 has been reserved [ 0.262100] system 00:0a: ioport range 0x400-0x4bf could not be reserved [ 0.262116] system 00:0c: iomem range 0xcf000-0xcffff has been reserved [ 0.262124] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.262131] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.262138] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.262149] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.262158] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.262168] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.262176] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.262184] system 00:0c: iomem range 0xfec01000-0xfed8ffff could not be reserved [ 0.262191] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.262198] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.262205] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved [ 0.262211] system 00:0c: iomem range 0xe0000-0xeffff has been reserved [ 0.297113] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.297119] pci 0000:00:01.0: IO window: disabled [ 0.297129] pci 0000:00:01.0: MEM window: 0xf4000000-0xf5ffffff [ 0.297138] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xefffffff [ 0.297152] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.297160] pci 0000:00:1e.0: IO window: 0xa000-0xafff [ 0.297170] pci 0000:00:1e.0: MEM window: 0xf6000000-0xf7ffffff [ 0.297179] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x800fffff [ 0.297205] pci 0000:00:1e.0: setting latency timer to 64 [ 0.297215] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.297221] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.297227] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf5ffffff] [ 0.297233] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.297240] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.297247] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff] [ 0.297253] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x800fffff] [ 0.297259] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.297264] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.297331] NET: Registered protocol family 2 [ 0.297516] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.298170] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.298825] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.299125] TCP: Hash tables configured (established 131072 bind 65536) [ 0.299131] TCP reno registered [ 0.299303] NET: Registered protocol family 1 [ 0.299463] pci 0000:01:00.0: Boot video device [ 0.299844] Scanning for low memory corruption every 60 seconds [ 0.300018] audit: initializing netlink socket (disabled) [ 0.300036] type=2000 audit(1361488925.297:1): initialized [ 0.310568] highmem bounce pool size: 64 pages [ 0.310581] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.313812] VFS: Disk quotas dquot_6.5.2 [ 0.313960] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.315222] fuse init (API version 7.13) [ 0.315418] msgmni has been set to 1680 [ 0.315837] alg: No test for stdrng (krng) [ 0.315957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.315964] io scheduler noop registered [ 0.315968] io scheduler anticipatory registered [ 0.315973] io scheduler deadline registered [ 0.316063] io scheduler cfq registered (default) [ 0.316299] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.316355] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.316489] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.316497] ACPI: Power Button [PWRB] [ 0.316626] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.316632] ACPI: Power Button [PWRF] [ 0.319777] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.319890] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.320009] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.320508] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.320713] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.323061] brd: module loaded [ 0.324124] loop: module loaded [ 0.324313] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.324508] ata_piix 0000:00:1f.2: version 2.13 [ 0.324529] alloc irq_desc for 18 on node -1 [ 0.324534] alloc kstat_irqs on node -1 [ 0.324546] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.324556] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.324621] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.324761] scsi0 : ata_piix [ 0.324926] scsi1 : ata_piix [ 0.326401] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.326408] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.327188] Fixed MDIO Bus: probed [ 0.327267] PPP generic driver version 2.4.2 [ 0.327351] tun: Universal TUN/TAP device driver, 1.6 [ 0.327357] tun: (C) 1999-2004 Max Krasnyansky [ 0.327539] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.327573] alloc irq_desc for 23 on node -1 [ 0.327578] alloc kstat_irqs on node -1 [ 0.327590] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.327612] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.327619] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.327683] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.331600] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.331630] isapnp: Scanning for PnP cards... [ 0.374318] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8000000 [ 0.390062] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.390266] usb usb1: configuration #1 chosen from 1 choice [ 0.390321] hub 1-0:1.0: USB hub found [ 0.390338] hub 1-0:1.0: 8 ports detected [ 0.390463] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.390495] uhci_hcd: USB Universal Host Controller Interface driver [ 0.390551] alloc irq_desc for 16 on node -1 [ 0.390556] alloc kstat_irqs on node -1 [ 0.390567] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.390580] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.390586] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.390648] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.390688] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bc00 [ 0.390848] usb usb2: configuration #1 chosen from 1 choice [ 0.390898] hub 2-0:1.0: USB hub found [ 0.390911] hub 2-0:1.0: 2 ports detected [ 0.390989] alloc irq_desc for 19 on node -1 [ 0.390994] alloc kstat_irqs on node -1 [ 0.391003] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.391014] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.391019] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.391076] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.391114] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000 [ 0.391275] usb usb3: configuration #1 chosen from 1 choice [ 0.391328] hub 3-0:1.0: USB hub found [ 0.391341] hub 3-0:1.0: 2 ports detected [ 0.391415] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.391425] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.391431] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.391488] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.391527] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400 [ 0.391684] usb usb4: configuration #1 chosen from 1 choice [ 0.391737] hub 4-0:1.0: USB hub found [ 0.391750] hub 4-0:1.0: 2 ports detected [ 0.391827] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.391837] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.391843] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.391901] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.391927] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800 [ 0.392092] usb usb5: configuration #1 chosen from 1 choice [ 0.392142] hub 5-0:1.0: USB hub found [ 0.392156] hub 5-0:1.0: 2 ports detected [ 0.392333] PNP: No PS/2 controller found. Probing ports directly. [ 0.583066] ata1.00: ATA-7: ST3750640NS, 3.BWK, max UDMA/133 [ 0.583073] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.642583] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.642781] mice: PS/2 mouse device common for all mice [ 0.642958] rtc_cmos 00:03: RTC can wake from S4 [ 0.643029] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.643056] rtc0: alarms up to one month, 242 bytes nvram [ 0.643274] device-mapper: uevent: version 1.0.3 [ 0.649729] ata1.00: configured for UDMA/133 [ 0.649923] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.682124] Freeing initrd memory: 12832k freed [ 0.685653] isapnp: No Plug & Play device found [ 0.686064] device-mapper: multipath: version 1.1.0 loaded [ 0.686078] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.686640] EISA: Probing bus 0 at eisa.0 [ 0.686715] EISA: Detected 0 cards. [ 0.686726] cpuidle: using governor ladder [ 0.686736] cpuidle: using governor menu [ 0.688648] TCP cubic registered [ 0.689250] NET: Registered protocol family 10 [ 0.690205] scsi 0:0:0:0: Direct-Access ATA ST3750640NS 3.BW PQ: 0 ANSI: 5 [ 0.690477] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.690634] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 0.690660] lo: Disabled Privacy Extensions [ 0.690753] sd 0:0:0:0: [sda] Write Protect is off [ 0.690760] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.690818] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.691401] NET: Registered protocol family 17 [ 0.691452] Using IPI No-Shortcut mode [ 0.691605] registered taskstats version 1 [ 0.691963] rtc_cmos 00:03: setting system clock to 2013-02-21 23:22:06 UTC (1361488926) [ 0.691969] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.691973] EDD information not available. [ 0.692240] sda: [ 0.701993] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 0.705900] sda1 sda2 < sda5 > [ 0.724732] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.724751] Freeing unused kernel memory: 620k freed [ 0.725243] Write protecting the kernel text: 4540k [ 0.725304] Write protecting the kernel read-only data: 1668k [ 0.757279] udev: starting version 151 [ 0.839720] usb 1-3: configuration #1 chosen from 1 choice [ 0.840987] hub 1-3:1.0: USB hub found [ 0.841291] hub 1-3:1.0: 4 ports detected [ 0.939408] vga16fb: initializing [ 0.939416] vga16fb: mapped to 0xc00a0000 [ 0.939531] fb0: VGA16 VGA frame buffer device [ 0.953979] usb 1-7: new high speed USB device using ehci_hcd and address 3 [ 0.986051] tg3.c:v3.102 (September 1, 2009) [ 0.986074] tg3 0000:02:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.989949] Linux agpgart interface v0.103 [ 1.016155] Floppy drive(s): fd0 is 1.44M [ 1.035108] agpgart-intel 0000:00:00.0: Intel i875 Chipset [ 1.038741] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf0000000 [ 1.041161] eth0: Tigon3 [partno(BCM95705A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:30:1b:b3:28:83 [ 1.041167] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0]) [ 1.041172] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.041176] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 1.046287] FDC 0 is a post-1991 82077 [ 1.055283] ohci1394 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.095105] usb 1-7: configuration #1 chosen from 1 choice [ 1.112618] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[f7030000-f70307ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.118657] Initializing USB Mass Storage driver... [ 1.118807] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.118950] usbcore: registered new interface driver usb-storage [ 1.118956] USB Mass Storage support registered. [ 1.119145] usb-storage: device found at 3 [ 1.119148] usb-storage: waiting for device to settle before scanning [ 1.158685] Console: switching to colour frame buffer device 80x30 [ 1.174213] usb 1-3.2: new low speed USB device using ehci_hcd and address 4 [ 1.274037] usb 1-3.2: configuration #1 chosen from 1 choice [ 1.291054] usbcore: registered new interface driver hiddev [ 1.294714] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input3 [ 1.294926] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.7-3.2/input0 [ 1.294966] usbcore: registered new interface driver usbhid [ 1.295114] usbhid: v2.6:USB HID core driver [ 1.344313] usb 1-3.3: new low speed USB device using ehci_hcd and address 5 [ 1.441561] usb 1-3.3: configuration #1 chosen from 1 choice [ 1.445549] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.3/1-3.3:1.0/input/input4 [ 1.445753] generic-usb 0003:046D:C00E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-3.3/input0 [ 1.590335] xor: automatically using best checksumming function: pIII_sse [ 1.608026] pIII_sse : 3529.000 MB/sec [ 1.608032] xor: using function: pIII_sse (3529.000 MB/sec) [ 1.614174] device-mapper: dm-raid45: initialized v0.2594b [ 1.900615] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.388201] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301bb3000028e7] [ 6.120760] usb-storage: device scan complete [ 6.122218] scsi 2:0:0:0: Direct-Access USB2.0 CardReader CF RW 0.0> PQ: 0 ANSI: 0 [ 6.123337] scsi 2:0:0:1: Direct-Access USB2.0 CardReader Combo 0.0> PQ: 0 ANSI: 0 [ 6.124146] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 6.124402] sd 2:0:0:1: Attached scsi generic sg2 type 0 [ 6.128065] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 6.129560] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 9.410226] udev: starting version 151 [ 9.478902] Adding 6036472k swap on /dev/sda5. Priority:-1 extents:1 across:6036472k [ 9.577212] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.688489] intel_rng: FWH not detected [ 9.690985] lp: driver loaded but no devices found [ 9.786414] arcnet loaded. [ 10.029342] type=1505 audit(1361488935.836:2): operation="profile_load" pid=604 name="/sbin/dhclient3" [ 10.030202] type=1505 audit(1361488935.836:3): operation="profile_load" pid=604 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.030328] type=1505 audit(1361488935.836:4): operation="profile_replace" pid=611 name="/sbin/dhclient3" [ 10.030675] type=1505 audit(1361488935.836:5): operation="profile_load" pid=604 name="/usr/lib/connman/scripts/dhclient-script" [ 10.031175] type=1505 audit(1361488935.836:6): operation="profile_replace" pid=611 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.031643] type=1505 audit(1361488935.836:7): operation="profile_replace" pid=611 name="/usr/lib/connman/scripts/dhclient-script" [ 10.378407] nvidia: module license 'NVIDIA' taints kernel. [ 10.378413] Disabling lock debugging due to kernel taint [ 10.734698] parport_pc 00:09: reported by Plug and Play ACPI [ 10.734743] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 10.739728] arcnet: COM20020 chipset support (by David Woodhouse et al.) [ 10.754776] arcnet: COM20020 PCI support [ 10.754825] alloc irq_desc for 20 on node -1 [ 10.754830] alloc kstat_irqs on node -1 [ 10.754842] com20020 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 10.754850] arc%d: SOHARD [ 10.754863] com20020: probe of 0000:02:08.0 failed with error -16 [ 10.832291] lp0: using parport0 (interrupt-driven). [ 10.907638] alloc irq_desc for 17 on node -1 [ 10.907644] alloc kstat_irqs on node -1 [ 10.907656] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 10.907708] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 10.945648] ppdev: user-space parallel port driver [ 10.987354] type=1505 audit(1361488936.792:8): operation="profile_load" pid=731 name="/usr/share/gdm/guest-session/Xsession" [ 10.989558] type=1505 audit(1361488936.796:9): operation="profile_replace" pid=732 name="/sbin/dhclient3" [ 10.990385] type=1505 audit(1361488936.796:10): operation="profile_replace" pid=732 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.990886] type=1505 audit(1361488936.796:11): operation="profile_replace" pid=732 name="/usr/lib/connman/scripts/dhclient-script" [ 11.012777] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.014487] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 11.153612] tg3 0000:02:07.0: firmware: requesting tigon/tg3_tso5.bin [ 11.420067] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.489094] intel8x0_measure_ac97_clock: measured 56860 usecs (2740 samples) [ 11.489104] intel8x0: clocking to 48000 [ 12.103524] CPU0 attaching NULL sched-domain. [ 12.103533] CPU1 attaching NULL sched-domain. [ 12.129117] CPU0 attaching sched-domain: [ 12.129124] domain 0: span 0-1 level SIBLING [ 12.129129] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 12.129141] domain 1: span 0-1 level MC [ 12.129146] groups: 0-1 (cpu_power = 1178) [ 12.129156] CPU1 attaching sched-domain: [ 12.129160] domain 0: span 0-1 level SIBLING [ 12.129165] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 12.129175] domain 1: span 0-1 level MC [ 12.129180] groups: 0-1 (cpu_power = 1178) [ 12.959973] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 12.960016] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 12.960069] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 14.176067] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 14.176072] tg3: eth0: Flow control is on for TX and on for RX. [ 14.176243] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.909490] CPU0 attaching NULL sched-domain. [ 15.909501] CPU1 attaching NULL sched-domain. [ 15.932147] CPU0 attaching sched-domain: [ 15.932155] domain 0: span 0-1 level SIBLING [ 15.932161] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 15.932179] domain 1: span 0-1 level MC [ 15.932185] groups: 0-1 (cpu_power = 1178) [ 15.932199] CPU1 attaching sched-domain: [ 15.932203] domain 0: span 0-1 level SIBLING [ 15.932211] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 15.932225] domain 1: span 0-1 level MC [ 15.932231] groups: 0-1 (cpu_power = 1178) [ 25.160010] eth0: no IPv6 routers present [ 223.316635] I-pipe: Domain RTAI registered. [ 223.316644] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 223.316648] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 223.316722] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 223.316726] PIPELINE layers: [ 223.316730] f851fe20 9ac15d93 RTAI 200 [ 223.316734] c085cb20 0 Linux 100 [ 223.342366] RTAI[malloc]: global heap size = 2097152 bytes, . [ 223.342580] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [ 223.342588] RTAI[sched]: hard timer type/freq = APIC/12528336(Hz); default timing: periodic; linear timed lists. [ 223.342594] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3006937000 hz. [ 223.342598] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 223.343525] RTAI[usi]: enabled. [ 223.415807] RTAI[math]: loaded. [ 223.514428] hm2: loading Mesa HostMot2 driver version 0.15 [ 223.519038] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 223.519075] hm2_pci: discovered 5i20 at 0000:02:08.0 [ 223.519143] hm2_5i20.0: firmware: requesting hm2/5i20/SVST1_4_7I47S.BIT [ 223.652610] hm2/hm2_5i20.0: 72 I/O Pins used: [ 223.652618] hm2/hm2_5i20.0: IO Pin 000 (P2-01): StepGen #0, pin Step (Output) [ 223.652624] hm2/hm2_5i20.0: IO Pin 001 (P2-03): StepGen #0, pin Direction (Output) [ 223.652629] hm2/hm2_5i20.0: IO Pin 002 (P2-05): StepGen #1, pin Step (Output) [ 223.652634] hm2/hm2_5i20.0: IO Pin 003 (P2-07): StepGen #1, pin Direction (Output) [ 223.652639] hm2/hm2_5i20.0: IO Pin 004 (P2-09): Encoder #0, pin A (Input) [ 223.652643] hm2/hm2_5i20.0: IO Pin 005 (P2-11): IOPort [ 223.652648] hm2/hm2_5i20.0: IO Pin 006 (P2-13): Encoder #0, pin B (Input) [ 223.652652] hm2/hm2_5i20.0: IO Pin 007 (P2-15): IOPort [ 223.652657] hm2/hm2_5i20.0: IO Pin 008 (P2-17): Encoder #0, pin Index (Input) [ 223.652661] hm2/hm2_5i20.0: IO Pin 009 (P2-19): IOPort [ 223.652665] hm2/hm2_5i20.0: IO Pin 010 (P2-21): IOPort [ 223.652669] hm2/hm2_5i20.0: IO Pin 011 (P2-23): IOPort [ 223.652673] hm2/hm2_5i20.0: IO Pin 012 (P2-25): IOPort [ 223.652677] hm2/hm2_5i20.0: IO Pin 013 (P2-27): IOPort [ 223.652681] hm2/hm2_5i20.0: IO Pin 014 (P2-29): IOPort [ 223.652685] hm2/hm2_5i20.0: IO Pin 015 (P2-31): IOPort [ 223.652689] hm2/hm2_5i20.0: IO Pin 016 (P2-33): IOPort [ 223.652694] hm2/hm2_5i20.0: IO Pin 017 (P2-35): PWMGen #0, pin Out1 (Dir or Down) (Output) [ 223.652699] hm2/hm2_5i20.0: IO Pin 018 (P2-37): PWMGen #0, pin Not-Enable (Output) [ 223.652704] hm2/hm2_5i20.0: IO Pin 019 (P2-39): PWMGen #0, pin Out0 (PWM or Up) (Output) [ 223.652709] hm2/hm2_5i20.0: IO Pin 020 (P2-41): StepGen #2, pin Step (Output) [ 223.652714] hm2/hm2_5i20.0: IO Pin 021 (P2-43): StepGen #2, pin Direction (Output) [ 223.652718] hm2/hm2_5i20.0: IO Pin 022 (P2-45): IOPort [ 223.652722] hm2/hm2_5i20.0: IO Pin 023 (P2-47): IOPort [ 223.652726] hm2/hm2_5i20.0: IO Pin 024 (P3-01): IOPort [ 223.652730] hm2/hm2_5i20.0: IO Pin 025 (P3-03): IOPort [ 223.652734] hm2/hm2_5i20.0: IO Pin 026 (P3-05): IOPort [ 223.652738] hm2/hm2_5i20.0: IO Pin 027 (P3-07): IOPort [ 223.652742] hm2/hm2_5i20.0: IO Pin 028 (P3-09): IOPort [ 223.652746] hm2/hm2_5i20.0: IO Pin 029 (P3-11): IOPort [ 223.652749] hm2/hm2_5i20.0: IO Pin 030 (P3-13): IOPort [ 223.652753] hm2/hm2_5i20.0: IO Pin 031 (P3-15): IOPort [ 223.652757] hm2/hm2_5i20.0: IO Pin 032 (P3-17): IOPort [ 223.652761] hm2/hm2_5i20.0: IO Pin 033 (P3-19): IOPort [ 223.652765] hm2/hm2_5i20.0: IO Pin 034 (P3-21): IOPort [ 223.652769] hm2/hm2_5i20.0: IO Pin 035 (P3-23): IOPort [ 223.652773] hm2/hm2_5i20.0: IO Pin 036 (P3-25): IOPort [ 223.652777] hm2/hm2_5i20.0: IO Pin 037 (P3-27): IOPort [ 223.652781] hm2/hm2_5i20.0: IO Pin 038 (P3-29): IOPort [ 223.652785] hm2/hm2_5i20.0: IO Pin 039 (P3-31): IOPort [ 223.652789] hm2/hm2_5i20.0: IO Pin 040 (P3-33): IOPort [ 223.652793] hm2/hm2_5i20.0: IO Pin 041 (P3-35): IOPort [ 223.652796] hm2/hm2_5i20.0: IO Pin 042 (P3-37): IOPort [ 223.652800] hm2/hm2_5i20.0: IO Pin 043 (P3-39): IOPort [ 223.652804] hm2/hm2_5i20.0: IO Pin 044 (P3-41): IOPort [ 223.652811] hm2/hm2_5i20.0: IO Pin 045 (P3-43): IOPort [ 223.652819] hm2/hm2_5i20.0: IO Pin 046 (P3-45): IOPort [ 223.652825] hm2/hm2_5i20.0: IO Pin 047 (P3-47): IOPort [ 223.652830] hm2/hm2_5i20.0: IO Pin 048 (P4-01): IOPort [ 223.652833] hm2/hm2_5i20.0: IO Pin 049 (P4-03): IOPort [ 223.652837] hm2/hm2_5i20.0: IO Pin 050 (P4-05): IOPort [ 223.652841] hm2/hm2_5i20.0: IO Pin 051 (P4-07): IOPort [ 223.652845] hm2/hm2_5i20.0: IO Pin 052 (P4-09): IOPort [ 223.652849] hm2/hm2_5i20.0: IO Pin 053 (P4-11): IOPort [ 223.652853] hm2/hm2_5i20.0: IO Pin 054 (P4-13): IOPort [ 223.652856] hm2/hm2_5i20.0: IO Pin 055 (P4-15): IOPort [ 223.652860] hm2/hm2_5i20.0: IO Pin 056 (P4-17): IOPort [ 223.652864] hm2/hm2_5i20.0: IO Pin 057 (P4-19): IOPort [ 223.652868] hm2/hm2_5i20.0: IO Pin 058 (P4-21): IOPort [ 223.652872] hm2/hm2_5i20.0: IO Pin 059 (P4-23): IOPort [ 223.652875] hm2/hm2_5i20.0: IO Pin 060 (P4-25): IOPort [ 223.652879] hm2/hm2_5i20.0: IO Pin 061 (P4-27): IOPort [ 223.652883] hm2/hm2_5i20.0: IO Pin 062 (P4-29): IOPort [ 223.652887] hm2/hm2_5i20.0: IO Pin 063 (P4-31): IOPort [ 223.652891] hm2/hm2_5i20.0: IO Pin 064 (P4-33): IOPort [ 223.652894] hm2/hm2_5i20.0: IO Pin 065 (P4-35): IOPort [ 223.652898] hm2/hm2_5i20.0: IO Pin 066 (P4-37): IOPort [ 223.652902] hm2/hm2_5i20.0: IO Pin 067 (P4-39): IOPort [ 223.652906] hm2/hm2_5i20.0: IO Pin 068 (P4-41): IOPort [ 223.652910] hm2/hm2_5i20.0: IO Pin 069 (P4-43): IOPort [ 223.652914] hm2/hm2_5i20.0: IO Pin 070 (P4-45): IOPort [ 223.652917] hm2/hm2_5i20.0: IO Pin 071 (P4-47): IOPort [ 223.653092] hm2/hm2_5i20.0: registered [ 223.653096] hm2_5i20.0: initialized AnyIO board at 0000:02:08.0 [ 224.649904] [ 224.649907] In recent history there were [ 224.649909] 2920867, 3028312, 3024780, 2979855, and 3079433 [ 224.649912] elapsed clocks between calls to the motion controller. [ 224.649918] This time, there were 3526815 which is so anomalously [ 224.649921] large that it probably signifies a problem with your [ 224.649923] realtime configuration. For the rest of this run of [ 224.649925] EMC, this message will be suppressed. [ 224.649928]